Convert CONFIG_FSL_SATA_V2 to Kconfig

[platform/kernel/u-boot.git] / include / configs / P2041RDB.h

diff --git a/include/configs/P2041RDB.h b/include/configs/P2041RDB.h
index 8ada25d..3c92a3e 100644 (file)
--- a/include/configs/P2041RDB.h
+++ b/include/configs/P2041RDB.h
@@ -56,9 +56,7 @@
  * These can be toggled for performance analysis, otherwise use default.
  */
 #define CONFIG_SYS_CACHE_STASHING
-#define CONFIG_BACKSIDE_L2_CACHE
 #define CONFIG_SYS_INIT_L2CSR0         L2CSR0_L2E
-#define CONFIG_BTB                     /* toggle branch predition */
 
 #define CONFIG_ENABLE_36BIT_PHYS
 
@@ -93,9 +91,6 @@
 #define CONFIG_SYS_DDR_SDRAM_BASE      0x00000000
 #define CONFIG_SYS_SDRAM_BASE          CONFIG_SYS_DDR_SDRAM_BASE
 
-#define CONFIG_DIMM_SLOTS_PER_CTLR     1
-#define CONFIG_CHIP_SELECTS_PER_CTRL   (4 * CONFIG_DIMM_SLOTS_PER_CTLR)
-
 #define CONFIG_SYS_SPD_BUS_NUM 0
 #define SPD_EEPROM_ADDRESS     0x52
 #define CONFIG_SYS_SDRAM_SIZE  4096    /* for fixed parameter use */
@@ -142,13 +137,10 @@
 #define CONFIG_SYS_FLASH_QUIET_TEST
 #define CONFIG_FLASH_SHOW_PROGRESS     45 /* count down from 45/5: 9..1 */
 
-#define CONFIG_SYS_MAX_FLASH_BANKS     1               /* number of banks */
 #define CONFIG_SYS_MAX_FLASH_SECT      1024            /* sectors per device */
 #define CONFIG_SYS_FLASH_ERASE_TOUT    60000           /* Erase Timeout (ms) */
 #define CONFIG_SYS_FLASH_WRITE_TOUT    500             /* Write Timeout (ms) */
 
-#define CONFIG_SYS_MONITOR_BASE                CONFIG_SYS_TEXT_BASE
-
 #if defined(CONFIG_RAMBOOT_PBL)
 #define CONFIG_SYS_RAMBOOT
 #endif
@@ -204,9 +196,7 @@
 #endif
 #define CONFIG_SYS_INIT_RAM_SIZE       0x00004000
 
-#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_SIZE - \
-                                       GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET      CONFIG_SYS_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_SP_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 
 #define CONFIG_SYS_MONITOR_LEN         (768 * 1024)
 
@@ -347,17 +337,8 @@
 #endif /* CONFIG_PCI */
 
 /* SATA */
-#define CONFIG_FSL_SATA_V2
 
 #ifdef CONFIG_FSL_SATA_V2
-#define CONFIG_SYS_SATA_MAX_DEVICE     2
-#define CONFIG_SATA1
-#define CONFIG_SYS_SATA1               CONFIG_SYS_MPC85xx_SATA1_ADDR
-#define CONFIG_SYS_SATA1_FLAGS         FLAGS_DMA
-#define CONFIG_SATA2
-#define CONFIG_SYS_SATA2               CONFIG_SYS_MPC85xx_SATA2_ADDR
-#define CONFIG_SYS_SATA2_FLAGS         FLAGS_DMA
-
 #define CONFIG_LBA48
 #endif
 
@@ -376,7 +357,6 @@
 #define CONFIG_SYS_FM1_10GEC1_PHY_ADDR 0
 
 #define CONFIG_SYS_TBIPA_VALUE 8
-#define CONFIG_ETHPRIME                "FM1@DTSEC1"
 #endif
 
 /*
@@ -385,16 +365,6 @@
 #define CONFIG_LOADS_ECHO              /* echo on for serial download */
 #define CONFIG_SYS_LOADS_BAUD_CHANGE   /* allow baudrate change */
 
-/*
-* USB
-*/
-#define CONFIG_HAS_FSL_DR_USB
-#define CONFIG_HAS_FSL_MPH_USB
-
-#if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB)
-#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
-#endif
-
 #ifdef CONFIG_MMC
 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
@@ -416,7 +386,6 @@
  * Environment Configuration
  */
 #define CONFIG_ROOTPATH                "/opt/nfsroot"
-#define CONFIG_BOOTFILE                "uImage"
 #define CONFIG_UBOOTPATH       u-boot.bin
 
 #define __USB_PHY_TYPE utmi