global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace

[platform/kernel/u-boot.git] / include / configs / P2041RDB.h

diff --git a/include/configs/P2041RDB.h b/include/configs/P2041RDB.h
index 11a3db5..08c1bcc 100644 (file)
--- a/include/configs/P2041RDB.h
+++ b/include/configs/P2041RDB.h
@@ -12,13 +12,13 @@
 #define __CONFIG_H
 
 #ifdef CONFIG_RAMBOOT_PBL
-#define CONFIG_RAMBOOT_TEXT_BASE       CONFIG_SYS_TEXT_BASE
+#define CONFIG_RAMBOOT_TEXT_BASE       CONFIG_TEXT_BASE
 #define CONFIG_RESET_VECTOR_ADDRESS    0xfffffffc
 #endif
 
 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
 /* Set 1M boot space */
-#define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000)
+#define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_TEXT_BASE & 0xfff00000)
 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS \
                (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR)
 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
@@ -59,18 +59,12 @@
 #else
 #define CONFIG_SYS_INIT_L3_ADDR_PHYS   CONFIG_SYS_INIT_L3_ADDR
 #endif
-#define CONFIG_SYS_L3_SIZE             (1024 << 10)
-#define CONFIG_SYS_INIT_L3_END (CONFIG_SYS_INIT_L3_ADDR + CONFIG_SYS_L3_SIZE)
 
 #ifdef CONFIG_PHYS_64BIT
 #define CONFIG_SYS_DCSRBAR             0xf0000000
 #define CONFIG_SYS_DCSRBAR_PHYS                0xf00000000ull
 #endif
 
-/* EEPROM */
-#define CONFIG_SYS_I2C_EEPROM_NXID
-#define CONFIG_SYS_EEPROM_BUS_NUM      0
-
 /*
  * DDR Setup
  */
@@ -125,7 +119,6 @@
 #endif
 
 #define CONFIG_SYS_NAND_BASE_LIST     {CONFIG_SYS_NAND_BASE}
-#define CONFIG_SYS_MAX_NAND_DEVICE     1
 
 /* NAND flash config */
 #define CONFIG_SYS_NAND_BR_PRELIM  (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
@@ -149,7 +142,6 @@
 
 /* define to use L1 as initial stack */
 #define CONFIG_L1_INIT_RAM
-#define CONFIG_SYS_INIT_RAM_LOCK
 #define CONFIG_SYS_INIT_RAM_ADDR       0xffd00000      /* Initial L1 address */
 #ifdef CONFIG_PHYS_64BIT
 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf
@@ -167,8 +159,6 @@
 
 #define CONFIG_SYS_INIT_SP_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 
-#define CONFIG_SYS_MONITOR_LEN         (768 * 1024)
-
 /* Serial Port - controlled on board with jumper J8
  * open - index 2
  * shorted - index 1
@@ -317,14 +307,8 @@
 #define CONFIG_SYS_TBIPA_VALUE 8
 #endif
 
-/*
- * Environment
- */
-#define CONFIG_LOADS_ECHO              /* echo on for serial download */
-#define CONFIG_SYS_LOADS_BAUD_CHANGE   /* allow baudrate change */
-
 #ifdef CONFIG_MMC
-#define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
+#define CFG_SYS_FSL_ESDHC_ADDR       CFG_SYS_MPC85xx_ESDHC_ADDR
 #endif
 
 /*
@@ -351,7 +335,7 @@
        "bank_intlv=cs0_cs1\0"                                  \
        "netdev=eth0\0"                                         \
        "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"                     \
-       "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"             \
+       "ubootaddr=" __stringify(CONFIG_TEXT_BASE) "\0"         \
        "tftpflash=tftpboot $loadaddr $uboot && "               \
        "protect off $ubootaddr +$filesize && "                 \
        "erase $ubootaddr +$filesize && "                       \