common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL

[platform/kernel/u-boot.git] / include / configs / P2020DS.h

diff --git a/include/configs/P2020DS.h b/include/configs/P2020DS.h
index 676f013..df9ab34 100644 (file)
--- a/include/configs/P2020DS.h
+++ b/include/configs/P2020DS.h
@@ -27,6 +27,10 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#ifdef CONFIG_MK_36BIT
+#define CONFIG_PHYS_64BIT
+#endif
+
 /* High Level Configuration Options */
 #define CONFIG_BOOKE           1       /* BOOKE */
 #define CONFIG_E500            1       /* BOOKE e500 family */
@@ -34,7 +38,6 @@
 #define CONFIG_P2020           1
 #define CONFIG_P2020DS         1
 #define CONFIG_MP              1       /* support multiple processors */
-#define CONFIG_NUM_CPUS                2       /* Number of CPUs in the system */
 
 #define CONFIG_FSL_ELBC                1       /* Has Enhanced localbus controller */
 #define CONFIG_PCI             1       /* Enable PCI/PCIE */
@@ -51,13 +54,6 @@
 #define CONFIG_TSEC_ENET               /* tsec ethernet support */
 #define CONFIG_ENV_OVERWRITE
 
-/*
- * When initializing flash, if we cannot find the manufacturer ID,
- * assume this is the AMD flash associated with the CDS board.
- * This allows booting from a promjet.
- */
-#define CONFIG_ASSUME_AMD_FLASH
-
 #ifndef __ASSEMBLY__
 extern unsigned long calculate_board_sys_clk(unsigned long dummy);
 extern unsigned long calculate_board_ddr_clk(unsigned long dummy);
@@ -282,6 +278,11 @@ extern unsigned long calculate_board_ddr_clk(unsigned long dummy);
 #define PIXIS_VWATCH           0x24    /* Watchdog Register */
 #define PIXIS_LED              0x25    /* LED Register */
 
+#define PIXIS_SW(x)            0x20 + (x - 1) * 2
+#define PIXIS_EN(x)            0x21 + (x - 1) * 2
+#define PIXIS_SW7_LBMAP                0xc0    /* SW7 - cfg_lbmap */
+#define PIXIS_SW7_VBANK                0x30    /* SW7 - cfg_vbank */
+
 /* old pixis referenced names */
 #define PIXIS_VCLKH            0x19    /* VELA VCLKH register */
 #define PIXIS_VCLKL            0x1A    /* VELA VCLKL register */
@@ -400,9 +401,6 @@ extern unsigned long calculate_board_ddr_clk(unsigned long dummy);
 #define CONFIG_OF_BOARD_SETUP          1
 #define CONFIG_OF_STDOUT_VIA_ALIAS     1
 
-#define CONFIG_SYS_64BIT_VSPRINTF      1
-#define CONFIG_SYS_64BIT_STRTOUL       1
-
 /* new uImage format support */
 #define CONFIG_FIT             1
 #define CONFIG_FIT_VERBOSE     1 /* enable fit_format_{error,warning}() */
@@ -412,7 +410,6 @@ extern unsigned long calculate_board_ddr_clk(unsigned long dummy);
 #define CONFIG_HARD_I2C                /* I2C with hardware support */
 #undef CONFIG_SOFT_I2C         /* I2C bit-banged */
 #define CONFIG_I2C_MULTI_BUS
-#define CONFIG_I2C_CMD_TREE
 #define CONFIG_SYS_I2C_SPEED           400000  /* I2C speed and slave address */
 #define CONFIG_SYS_I2C_EEPROM_ADDR     0x57
 #define CONFIG_SYS_I2C_SLAVE           0x7F
@@ -610,12 +607,20 @@ extern unsigned long calculate_board_ddr_clk(unsigned long dummy);
 
 #if defined(CONFIG_PCI)
 #define CONFIG_CMD_PCI
-#define CONFIG_CMD_BEDBUG
 #define CONFIG_CMD_NET
 #define CONFIG_CMD_SCSI
 #define CONFIG_CMD_EXT2
 #endif
 
+/*
+ * USB
+ */
+#define CONFIG_CMD_USB
+#define CONFIG_USB_STORAGE
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_FSL
+#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
+
 #undef CONFIG_WATCHDOG                 /* watchdog disabled */
 
 /*
@@ -637,10 +642,10 @@ extern unsigned long calculate_board_ddr_clk(unsigned long dummy);
 
 /*
  * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
+ * have to be in the first 16 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CONFIG_SYS_BOOTMAPSZ   (8 << 20)       /* Initial Memory map for Linux*/
+#define CONFIG_SYS_BOOTMAPSZ   (16 << 20)      /* Initial Memory map for Linux*/
 
 /*
  * Internal Definitions