pci: introduce CONFIG_PCI_INDIRECT_BRIDGE option

[platform/kernel/u-boot.git] / include / configs / P2020COME.h

diff --git a/include/configs/P2020COME.h b/include/configs/P2020COME.h
index db88b68..05a75d8 100644 (file)
--- a/include/configs/P2020COME.h
+++ b/include/configs/P2020COME.h
@@ -1,5 +1,5 @@
 /*
- * Copyright 2009-2010 Freescale Semiconductor, Inc.
+ * Copyright 2009-2010,2012 Freescale Semiconductor, Inc.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -58,6 +58,7 @@
 #define CONFIG_PCIE3           1       /* PCIE controller 3 (slot 3) */
 
 #define CONFIG_FSL_PCI_INIT    1       /* Use common FSL init code */
+#define CONFIG_PCI_INDIRECT_BRIDGE 1   /* indirect PCI bridge support */
 #define CONFIG_FSL_PCIE_RESET  1       /* need PCIe reset errata */
 #define CONFIG_SYS_PCI_64BIT   1       /* enable 64-bit PCI resources */
 #endif /* #if defined(CONFIG_PCI) */
@@ -103,12 +104,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_SYS_MEMTEST_END         0x1fffffff
 #define CONFIG_PANIC_HANG      /* do not reset board on panic */
 
-
-
-
-
-
-
  /*
   * Config the L2 Cache as L2 SRAM
   */
@@ -207,7 +202,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_SYS_NS16550_REG_SIZE    1
 #define CONFIG_SYS_NS16550_CLK         get_bus_freq(0)
 
-#define CONFIG_SERIAL_MULTI    1 /* Enable both serial ports */
 #define CONFIG_SYS_CONSOLE_IS_IN_ENV   /* determine from environment */
 
 #define CONFIG_SYS_BAUDRATE_TABLE   \
@@ -218,9 +212,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 
 /* Use the HUSH parser */
 #define CONFIG_SYS_HUSH_PARSER
-#ifdef CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
-#endif
 
 /*
  * Pass open firmware flat tree
@@ -316,7 +307,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #define _IO_BASE               0x00000000
 #endif
 
-
 #define CONFIG_PCI_SCAN_SHOW           /* show pci devices on startup */
 #define CONFIG_DOS_PARTITION
 
@@ -357,6 +347,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
  */
 #if defined(CONFIG_RAMBOOT_SDCARD)
        #define CONFIG_ENV_IS_IN_MMC    1
+       #define CONFIG_FSL_FIXED_MMC_LOCATION
        #define CONFIG_ENV_SIZE         0x2000
        #define CONFIG_SYS_MMC_ENV_DEV  0
 #elif defined(CONFIG_RAMBOOT_SPIFLASH)
@@ -405,6 +396,8 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
 #endif /* CONFIG_MMC */
 
+#define CONFIG_HAS_FSL_DR_USB
+#ifdef CONFIG_HAS_FSL_DR_USB
 #define CONFIG_USB_EHCI
 
 #ifdef CONFIG_USB_EHCI
@@ -412,7 +405,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 #define CONFIG_USB_EHCI_FSL
 #define CONFIG_USB_STORAGE
-#define CONFIG_HAS_FSL_DR_USB
+#endif
 #endif
 
 #if defined(CONFIG_MMC) || defined(CONFIG_USB_EHCI)
@@ -422,8 +415,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #endif
 
 /* Misc Extra Settings */
-#define CONFIG_SYS_64BIT_VSPRINTF      1
-#define CONFIG_SYS_64BIT_STRTOUL       1
 #define CONFIG_CMD_DHCP                        1
 
 #define CONFIG_CMD_DATE                        1
@@ -563,6 +554,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
        "tftp $fdtaddr $tftppath/$fdtfile;"                             \
        "bootm $loadaddr - $fdtaddr"
 
+
 #define CONFIG_RAMBOOTCOMMAND                                          \
        "setenv bootargs root=/dev/ram rw "                             \
        "console=$consoledev,$baudrate $othbootargs;"                   \