hush.c: Move default CONFIG_SYS_PROMPT_HUSH_PS2 to hush.c

[platform/kernel/u-boot.git] / include / configs / P1_P2_RDB.h

diff --git a/include/configs/P1_P2_RDB.h b/include/configs/P1_P2_RDB.h
index 59f9755..ab88166 100644 (file)
--- a/include/configs/P1_P2_RDB.h
+++ b/include/configs/P1_P2_RDB.h
@@ -148,24 +148,11 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_SYS_L2_SIZE             (512 << 10)
 #define CONFIG_SYS_INIT_L2_END         (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
 
-/*
- * Base addresses -- Note these are effective addresses where the
- * actual resources get mapped (not physical addresses)
- */
-#define CONFIG_SYS_CCSRBAR             0xffe00000      /* relocated CCSRBAR */
-#ifdef CONFIG_PHYS_64BIT
-#define CONFIG_SYS_CCSRBAR_PHYS        0xfffe00000ull
-#else
-#define CONFIG_SYS_CCSRBAR_PHYS        CONFIG_SYS_CCSRBAR
-#endif
-                                                       /* CCSRBAR */
-#define CONFIG_SYS_IMMR                CONFIG_SYS_CCSRBAR      /* PQII uses */
-                                                       /* CONFIG_SYS_IMMR */
+#define CONFIG_SYS_CCSRBAR             0xffe00000
+#define CONFIG_SYS_CCSRBAR_PHYS_LOW    CONFIG_SYS_CCSRBAR
 
-#if defined(CONFIG_RAMBOOT_NAND) && !defined(CONFIG_NAND_SPL)
-#define CONFIG_SYS_CCSRBAR_DEFAULT     CONFIG_SYS_CCSRBAR
-#else
-#define CONFIG_SYS_CCSRBAR_DEFAULT     0xff700000      /* CCSRBAR Default */
+#if defined(CONFIG_NAND_SPL)
+#define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
 #endif
 
 /* DDR Setup */
@@ -286,11 +273,10 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #endif
 #endif
 
+#define CONFIG_CMD_NAND
 #define CONFIG_SYS_NAND_BASE_LIST      {CONFIG_SYS_NAND_BASE}
 #define CONFIG_SYS_MAX_NAND_DEVICE     1
-#define NAND_MAX_CHIPS                 1
 #define CONFIG_MTD_NAND_VERIFY_WRITE
-#define CONFIG_CMD_NAND                        1
 #define CONFIG_NAND_FSL_ELBC           1
 #define CONFIG_SYS_NAND_BLOCK_SIZE     (16 * 1024)
 
@@ -368,9 +354,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 
 /* Use the HUSH parser */
 #define CONFIG_SYS_HUSH_PARSER
-#ifdef CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
-#endif
 
 /*
  * Pass open firmware flat tree
@@ -484,7 +467,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 
 #endif /* CONFIG_PCI */
 
-#define CONFIG_NET_MULTI       1
 
 #if defined(CONFIG_TSEC_ENET)
 #define CONFIG_MII             1       /* MII PHY management */
@@ -533,6 +515,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
        #define CONFIG_ENV_OFFSET       ((512 * 1024) + CONFIG_SYS_NAND_BLOCK_SIZE)
 #elif defined(CONFIG_RAMBOOT_SDCARD)
 #define CONFIG_ENV_IS_IN_MMC
+#define CONFIG_FSL_FIXED_MMC_LOCATION
 #define CONFIG_ENV_SIZE                        0x2000
 #define CONFIG_SYS_MMC_ENV_DEV         0
 #elif defined(CONFIG_RAMBOOT_SPIFLASH)
@@ -594,6 +577,9 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #endif
 #endif
 
+#define CONFIG_HAS_FSL_DR_USB
+
+#if defined(CONFIG_HAS_FSL_DR_USB)
 #define CONFIG_USB_EHCI
 
 #ifdef CONFIG_USB_EHCI
@@ -602,6 +588,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_USB_EHCI_FSL
 #define CONFIG_USB_STORAGE
 #endif
+#endif
 
 #if defined(CONFIG_MMC) || defined(CONFIG_USB_EHCI)
 #define CONFIG_CMD_EXT2
@@ -652,8 +639,8 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #endif
 
 #define CONFIG_HOSTNAME                P2020RDB
-#define CONFIG_ROOTPATH                /opt/nfsroot
-#define CONFIG_BOOTFILE                uImage
+#define CONFIG_ROOTPATH                "/opt/nfsroot"
+#define CONFIG_BOOTFILE                "uImage"
 #define CONFIG_UBOOTPATH       u-boot.bin/* U-Boot image on TFTP server */
 
 /* default location for tftp and bootm */
@@ -688,7 +675,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
        "nandfdtaddr=80000\0"           \
        "nandimgsize=400000\0"          \
        "nandfdtsize=80000\0"           \
-       "usb_phy_type=ulpi\0"           \
+       "hwconfig=usb1:dr_mode=host,phy_type=ulpi\0"    \
        "vscfw_addr=ef000000\0" \
        "othbootargs=ramdisk_size=600000\0" \
        "usbfatboot=setenv bootargs root=/dev/ram rw "  \