powerpc/p4080ds: Move ICS refclk define into P4080DS.h

[platform/kernel/u-boot.git] / include / configs / P1_P2_RDB.h

diff --git a/include/configs/P1_P2_RDB.h b/include/configs/P1_P2_RDB.h
index 8c373fa..610f3ed 100644 (file)
--- a/include/configs/P1_P2_RDB.h
+++ b/include/configs/P1_P2_RDB.h
@@ -1,5 +1,5 @@
 /*
- * Copyright 2009 Freescale Semiconductor, Inc.
+ * Copyright 2009-2010 Freescale Semiconductor, Inc.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -46,7 +46,12 @@
 #ifdef CONFIG_NAND
 #define CONFIG_NAND_U_BOOT             1
 #define CONFIG_RAMBOOT_NAND            1
+#ifdef CONFIG_NAND_SPL
+#define CONFIG_SYS_TEXT_BASE_SPL 0xfff00000
+#define CONFIG_SYS_MONITOR_BASE        CONFIG_SYS_TEXT_BASE_SPL /* start of monitor */
+#else
 #define CONFIG_SYS_TEXT_BASE           0xf8f82000
+#endif /* CONFIG_NAND_SPL */
 #endif
 
 #ifdef CONFIG_SDCARD
@@ -63,6 +68,10 @@
 #define CONFIG_SYS_TEXT_BASE           0xeff80000
 #endif
 
+#ifndef CONFIG_SYS_MONITOR_BASE
+#define CONFIG_SYS_MONITOR_BASE        CONFIG_SYS_TEXT_BASE    /* start of monitor */
+#endif
+
 /* High Level Configuration Options */
 #define CONFIG_BOOKE           1       /* BOOKE */
 #define CONFIG_E500            1       /* BOOKE e500 family */
@@ -192,8 +201,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_SYS_FLASH_ERASE_TOUT    60000   /* Flash Erase Timeout (ms) */
 #define CONFIG_SYS_FLASH_WRITE_TOUT    500     /* Flash Write Timeout (ms) */
 
-#define CONFIG_SYS_MONITOR_BASE        CONFIG_SYS_TEXT_BASE    /* start of monitor */
-
 #if defined(CONFIG_SYS_SPL) || defined(CONFIG_RAMBOOT_NAND) \
        || defined(CONFIG_RAMBOOT_SDCARD) || defined(CONFIG_RAMBOOT_SPIFLASH)
 #define CONFIG_SYS_RAMBOOT
@@ -211,11 +218,10 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 
 #define CONFIG_SYS_INIT_RAM_LOCK       1
 #define CONFIG_SYS_INIT_RAM_ADDR      0xffd00000       /* stack in RAM */
-#define CONFIG_SYS_INIT_RAM_END        0x00004000      /* End of used area in RAM */
+#define CONFIG_SYS_INIT_RAM_SIZE       0x00004000      /* Size of used area in RAM */
 
-#define CONFIG_SYS_GBL_DATA_SIZE       128     /* num bytes initial data */
-#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_END \
-                                               - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_SIZE \
+                                               - GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET      CONFIG_SYS_GBL_DATA_OFFSET
 
 #define CONFIG_SYS_MONITOR_LEN         (256 * 1024) /* Reserve 256 kB for Mon*/
@@ -344,6 +350,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_SYS_EEPROM_BUS_NUM      1
 
 #define CONFIG_RTC_DS1337
+#define CONFIG_SYS_RTC_DS1337_NOOSC
 #define CONFIG_SYS_I2C_RTC_ADDR                0x68
 /*
  * General PCI
@@ -542,14 +549,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
  */
 #define CONFIG_SYS_BOOTMAPSZ   (16 << 20)/* Initial Memory map for Linux*/
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01            /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM  0x02            /* Software reboot */
-
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   230400  /* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX  2       /* which serial port to use */