powerpc: P4080DS: Remove macro CONFIG_P4080DS

[platform/kernel/u-boot.git] / include / configs / P1023RDB.h

diff --git a/include/configs/P1023RDB.h b/include/configs/P1023RDB.h
index 3943707..5061286 100644 (file)
--- a/include/configs/P1023RDB.h
+++ b/include/configs/P1023RDB.h
@@ -10,8 +10,6 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#define CONFIG_DISPLAY_BOARDINFO
-
 #ifndef CONFIG_SYS_TEXT_BASE
 #define CONFIG_SYS_TEXT_BASE   0xeff40000
 #endif
@@ -27,15 +25,13 @@
 /* High Level Configuration Options */
 #define CONFIG_BOOKE           /* BOOKE */
 #define CONFIG_E500            /* BOOKE e500 family */
-#define CONFIG_P1023
 #define CONFIG_MP              /* support multiple processors */
 
 #define CONFIG_FSL_ELBC                /* Has Enhanced localbus controller */
-#define CONFIG_PCI             /* Enable PCI/PCIE */
 #define CONFIG_PCI_INDIRECT_BRIDGE     /* indirect PCI bridge support */
-#define CONFIG_PCIE1           /* PCIE controler 1 (slot 1) */
-#define CONFIG_PCIE2           /* PCIE controler 2 (slot 2) */
-#define CONFIG_PCIE3           /* PCIE controler 3 (slot 3) */
+#define CONFIG_PCIE1           /* PCIE controller 1 (slot 1) */
+#define CONFIG_PCIE2           /* PCIE controller 2 (slot 2) */
+#define CONFIG_PCIE3           /* PCIE controller 3 (slot 3) */
 #define CONFIG_FSL_PCI_INIT    /* Use common FSL init code */
 #define CONFIG_FSL_PCIE_RESET  /* need PCIe reset errata */
 #define CONFIG_SYS_PCI_64BIT   /* enable 64-bit PCI resources */
@@ -172,19 +168,6 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_SYS_NS16550_COM1        (CONFIG_SYS_CCSRBAR + 0x4500)
 #define CONFIG_SYS_NS16550_COM2        (CONFIG_SYS_CCSRBAR + 0x4600)
 
-/* Use the HUSH parser */
-#define CONFIG_SYS_HUSH_PARSER
-
-/*
- * Pass open firmware flat tree
- */
-#define CONFIG_OF_BOARD_SETUP
-#define CONFIG_OF_STDOUT_VIA_ALIAS
-
-/* new uImage format support */
-#define CONFIG_FIT
-#define CONFIG_FIT_VERBOSE     /* enable fit_format_{error,warning}() */
-
 /* I2C */
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_FSL
@@ -206,8 +189,6 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN         1
 #define CONFIG_SYS_EEPROM_BUS_NUM              0
 
-#define CONFIG_CMD_I2C
-
 /*
  * General PCI
  * Memory space is mapped 1-1, but I/O space must start from 0.
@@ -247,7 +228,6 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_SYS_PCIE1_IO_SIZE       0x00010000      /* 64k */
 
 #if defined(CONFIG_PCI)
-#define CONFIG_PCI_PNP         /* do pci plug-and-play */
 #define CONFIG_PCI_SCAN_SHOW   /* show pci devices on startup */
 #endif /* CONFIG_PCI */
 
@@ -268,8 +248,6 @@ extern unsigned long get_clock_freq(void);
  * Command line configuration.
  */
 #define CONFIG_CMD_IRQ
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_MII
 #define CONFIG_CMD_REGINFO
 
 #if defined(CONFIG_PCI)
@@ -284,13 +262,8 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_USB_EHCI
 
 #ifdef CONFIG_USB_EHCI
-#define CONFIG_CMD_USB
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 #define CONFIG_USB_EHCI_FSL
-#define CONFIG_USB_STORAGE
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_FAT
 #define CONFIG_DOS_PARTITION
 #endif
 #endif
@@ -329,7 +302,6 @@ extern unsigned long get_clock_freq(void);
 /* default location for tftp and bootm */
 #define CONFIG_LOADADDR                1000000
 
-#define CONFIG_BOOTDELAY -1    /* -1 disables auto-boot */
 
 #define CONFIG_BAUDRATE        115200
 
@@ -397,7 +369,7 @@ extern unsigned long get_clock_freq(void);
        "consoledev=ttyS0\0"                                    \
        "ramdiskaddr=2000000\0"                                 \
        "ramdiskfile=rootfs.ext2.gz.uboot\0"                    \
-       "fdtaddr=c00000\0"                                      \
+       "fdtaddr=1e00000\0"                                     \
        "fdtfile=p1023rdb.dtb\0"                                \
        "othbootargs=ramdisk_size=600000\0"                     \
        "bdev=sda1\0"                                           \