p1022ds: fix pixis_reset altbank

[platform/kernel/u-boot.git] / include / configs / P1022DS.h

diff --git a/include/configs/P1022DS.h b/include/configs/P1022DS.h
index dcaca2b..cb24041 100644 (file)
--- a/include/configs/P1022DS.h
+++ b/include/configs/P1022DS.h
@@ -1,5 +1,5 @@
 /*
- * Copyright 2010 Freescale Semiconductor, Inc.
+ * Copyright 2010-2011 Freescale Semiconductor, Inc.
  * Authors: Srikanth Srinivasan <srikanth.srinivasan@freescale.com>
  *          Timur Tabi <timur@freescale.com>
  *
@@ -22,6 +22,14 @@
 #define CONFIG_P1022DS
 #define CONFIG_MP                      /* support multiple processors */
 
+#ifndef CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_TEXT_BASE   0xeff80000
+#endif
+
+#ifndef CONFIG_RESET_VECTOR_ADDRESS
+#define CONFIG_RESET_VECTOR_ADDRESS    0xeffffffc
+#endif
+
 #define CONFIG_FSL_ELBC                        /* Has Enhanced localbus controller */
 #define CONFIG_PCI                     /* Enable PCI/PCIE */
 #define CONFIG_PCIE1                   /* PCIE controler 1 (slot 1) */
@@ -30,7 +38,6 @@
 #define CONFIG_FSL_PCI_INIT            /* Use common FSL init code */
 #define CONFIG_FSL_PCIE_RESET          /* need PCIe reset errata */
 #define CONFIG_SYS_PCI_64BIT           /* enable 64-bit PCI resources */
-#define CONFIG_SYS_HAS_SERDES          /* has SERDES */
 
 #define CONFIG_PHYS_64BIT
 #define CONFIG_ENABLE_36BIT_PHYS
@@ -125,7 +132,7 @@
 #define CONFIG_SYS_MAX_FLASH_BANKS     2
 #define CONFIG_SYS_MAX_FLASH_SECT      1024
 
-#define CONFIG_SYS_MONITOR_BASE                TEXT_BASE       /* start of monitor */
+#define CONFIG_SYS_MONITOR_BASE                CONFIG_SYS_TEXT_BASE    /* start of monitor */
 
 #define CONFIG_FLASH_CFI_DRIVER
 #define CONFIG_SYS_FLASH_CFI
@@ -134,6 +141,7 @@
 #define CONFIG_BOARD_EARLY_INIT_F
 #define CONFIG_BOARD_EARLY_INIT_R
 #define CONFIG_MISC_INIT_R
+#define CONFIG_HWCONFIG
 
 #define CONFIG_FSL_NGPIXIS
 #define PIXIS_BASE             0xffdf0000      /* PIXIS registers */
@@ -143,16 +151,15 @@
 #define CONFIG_SYS_OR2_PRELIM  (OR_AM_32KB | 0x6ff7)
 
 #define PIXIS_LBMAP_SWITCH     7
-#define PIXIS_LBMAP_MASK       0xE0
+#define PIXIS_LBMAP_MASK       0xF0
 #define PIXIS_LBMAP_ALTBANK    0x20
 
 #define CONFIG_SYS_INIT_RAM_LOCK
 #define CONFIG_SYS_INIT_RAM_ADDR       0xffd00000 /* Initial L1 address */
-#define CONFIG_SYS_INIT_RAM_END                0x00004000 /* End of used area in RAM */
+#define CONFIG_SYS_INIT_RAM_SIZE               0x00004000 /* Size of used area in RAM */
 
-#define CONFIG_SYS_GBL_DATA_SIZE       128     /* num bytes initial data */
 #define CONFIG_SYS_GBL_DATA_OFFSET     \
-       (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+       (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET      CONFIG_SYS_GBL_DATA_OFFSET
 
 #define CONFIG_SYS_MONITOR_LEN         (512 * 1024)
@@ -177,14 +184,23 @@
 #define CONFIG_SYS_HUSH_PARSER
 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
 
-#define CONFIG_FSL_DIU_FB
-#define CONFIG_SYS_DIU_ADDR    (CONFIG_SYS_CCSRBAR + 0x10000)
-
 /* Video */
-/* #define CONFIG_VIDEO */
-#ifdef CONFIG_VIDEO
+#undef CONFIG_FSL_DIU_FB
+
+#ifdef CONFIG_FSL_DIU_FB
+#define CONFIG_SYS_DIU_ADDR    (CONFIG_SYS_CCSRBAR + 0x10000)
+#define CONFIG_VIDEO
+#define CONFIG_CMD_BMP
 #define CONFIG_CFB_CONSOLE
 #define CONFIG_VGA_AS_SINGLE_DEVICE
+#define CONFIG_VIDEO_LOGO
+#define CONFIG_VIDEO_BMP_LOGO
+#define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS
+/*
+ * With CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS, flash I/O is really slow, so
+ * disable empty flash sector detection, which is I/O-intensive.
+ */
+#undef CONFIG_SYS_FLASH_EMPTY_INFO
 #endif
 
 /*
@@ -257,6 +273,7 @@
 #define CONFIG_NET_MULTI
 #define CONFIG_PCI_PNP                 /* do pci plug-and-play */
 #define CONFIG_PCI_SCAN_SHOW           /* show pci devices on startup */
+#define CONFIG_E1000                   /* Define e1000 pci Ethernet card */
 #endif
 
 /* SATA */
@@ -342,6 +359,7 @@
 #define CONFIG_CMD_MII
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_SETEXPR
+#define CONFIG_CMD_REGINFO
 
 #ifdef CONFIG_PCI
 #define CONFIG_CMD_PCI
@@ -386,14 +404,7 @@
  * the maximum mapped by the Linux kernel during initialization.
  */
 #define CONFIG_SYS_BOOTMAPSZ   (16 << 20)      /* Initial Memory map for Linux*/
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01            /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM  0x02            /* Software reboot */
+#define CONFIG_SYS_BOOTM_LEN   (16 << 20)      /* Increase max gunzip size */
 
 #ifdef CONFIG_CMD_KGDB
 #define CONFIG_KGDB_BAUDRATE   230400  /* speed to run kgdb serial port */
@@ -422,11 +433,11 @@
        "netdev=eth0\0"                                                 \
        "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0"                          \
        "tftpflash=tftpboot $loadaddr $uboot; "                         \
-               "protect off " MK_STR(TEXT_BASE) " +$filesize; "        \
-               "erase " MK_STR(TEXT_BASE) " +$filesize; "              \
-               "cp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize; "      \
-               "protect on " MK_STR(TEXT_BASE) " +$filesize; "         \
-               "cmp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize\0"     \
+               "protect off " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; "     \
+               "erase " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; "           \
+               "cp.b $loadaddr " MK_STR(CONFIG_SYS_TEXT_BASE) " $filesize; "   \
+               "protect on " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; "              \
+               "cmp.b $loadaddr " MK_STR(CONFIG_SYS_TEXT_BASE) " $filesize\0"  \
        "consoledev=ttyS0\0"                                            \
        "ramdiskaddr=2000000\0"                                         \
        "ramdiskfile=uramdisk\0"                                        \