Convert CONFIG_SYS_NAND_ONFI_DETECTION to Kconfig

[platform/kernel/u-boot.git] / include / configs / P1010RDB.h

diff --git a/include/configs/P1010RDB.h b/include/configs/P1010RDB.h
index 9c1cc2f..899a51d 100644 (file)
--- a/include/configs/P1010RDB.h
+++ b/include/configs/P1010RDB.h
@@ -167,7 +167,6 @@
 
 /* DDR Setup */
 #define CONFIG_SYS_DDR_RAW_TIMING
-#define CONFIG_DDR_SPD
 #define CONFIG_SYS_SPD_BUS_NUM         1
 #define SPD_EEPROM_ADDRESS             0x52
 
@@ -310,10 +309,8 @@ extern unsigned long get_sdram_size(void);
                                | CSOR_NAND_PGS_512     /* Page Size = 512b */ \
                                | CSOR_NAND_SPRZ_16     /* Spare size = 16 */ \
                                | CSOR_NAND_PB(32))     /* 32 Pages Per Block */
-#define CONFIG_SYS_NAND_BLOCK_SIZE     (16 * 1024)
 
 #elif defined(CONFIG_TARGET_P1010RDB_PB)
-#define CONFIG_SYS_NAND_ONFI_DETECTION
 #define CONFIG_SYS_NAND_CSOR   (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
                                | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
                                | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
@@ -321,7 +318,6 @@ extern unsigned long get_sdram_size(void);
                                | CSOR_NAND_PGS_4K      /* Page Size = 4K */ \
                                | CSOR_NAND_SPRZ_224    /* Spare size = 224 */ \
                                | CSOR_NAND_PB(128))  /*Pages Per Block = 128 */
-#define CONFIG_SYS_NAND_BLOCK_SIZE     (512 * 1024)
 #endif
 
 #define CONFIG_SYS_NAND_BASE_LIST      { CONFIG_SYS_NAND_BASE }
@@ -442,7 +438,6 @@ extern unsigned long get_sdram_size(void);
 #define CONFIG_SYS_INIT_SP_OFFSET      CONFIG_SYS_GBL_DATA_OFFSET
 
 #define CONFIG_SYS_MONITOR_LEN         (768 * 1024)
-#define CONFIG_SYS_MALLOC_LEN          (1024 * 1024)   /* Reserved for malloc*/
 
 /*
  * Config the L2 Cache as L2 SRAM
@@ -612,7 +607,6 @@ extern unsigned long get_sdram_size(void);
 /*
  * Miscellaneous configurable options
  */
-#define CONFIG_SYS_LOAD_ADDR   0x2000000       /* default load address */
 
 /*
  * For booting Linux, the board info and command line data
@@ -622,10 +616,6 @@ extern unsigned long get_sdram_size(void);
 #define CONFIG_SYS_BOOTMAPSZ   (64 << 20) /* Initial Memory map for Linux */
 #define CONFIG_SYS_BOOTM_LEN   (64 << 20) /* Increase max gunzip size */
 
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE   230400  /* speed to run kgdb serial port */
-#endif
-
 /*
  * Environment Configuration
  */
@@ -640,9 +630,6 @@ extern unsigned long get_sdram_size(void);
 #define CONFIG_BOOTFILE                "uImage"
 #define CONFIG_UBOOTPATH       u-boot.bin/* U-Boot image on TFTP server */
 
-/* default location for tftp and bootm */
-#define CONFIG_LOADADDR                1000000
-
 #define        CONFIG_EXTRA_ENV_SETTINGS                               \
        "hwconfig=" __stringify(CONFIG_DEF_HWCONFIG)  "\0"      \
        "netdev=eth0\0"                                         \