powerpc: mpc85xx: Move CONFIG_FSL_LAW to Kconfig

[platform/kernel/u-boot.git] / include / configs / P1010RDB.h

diff --git a/include/configs/P1010RDB.h b/include/configs/P1010RDB.h
index e17de90..78e0064 100644 (file)
--- a/include/configs/P1010RDB.h
+++ b/include/configs/P1010RDB.h
@@ -19,7 +19,6 @@
 #define CONFIG_SPL_MMC_MINIMAL
 #define CONFIG_SPL_FLUSH_IMAGE
 #define CONFIG_SPL_TARGET              "u-boot-with-spl.bin"
-#define CONFIG_FSL_LAW                 /* Use common FSL init code */
 #define CONFIG_SYS_TEXT_BASE           0x11001000
 #define CONFIG_SPL_TEXT_BASE           0xD0001000
 #define CONFIG_SPL_PAD_TO              0x18000
@@ -45,7 +44,6 @@
 #define CONFIG_SPL_SPI_FLASH_MINIMAL
 #define CONFIG_SPL_FLUSH_IMAGE
 #define CONFIG_SPL_TARGET              "u-boot-with-spl.bin"
-#define CONFIG_FSL_LAW         /* Use common FSL init code */
 #define CONFIG_SYS_TEXT_BASE                   0x11001000
 #define CONFIG_SPL_TEXT_BASE                   0xD0001000
 #define CONFIG_SPL_PAD_TO                      0x18000
@@ -174,9 +172,9 @@
 #endif
 
 /* controller 2, Slot 2, tgtid 2, Base address 9000 */
-#if defined(CONFIG_P1010RDB_PA)
+#if defined(CONFIG_TARGET_P1010RDB_PA)
 #define CONFIG_SYS_PCIE2_NAME          "PCIe Slot"
-#elif defined(CONFIG_P1010RDB_PB)
+#elif defined(CONFIG_TARGET_P1010RDB_PB)
 #define CONFIG_SYS_PCIE2_NAME          "mini PCIe Slot"
 #endif
 #define CONFIG_SYS_PCIE2_MEM_VIRT      0xa0000000
@@ -201,7 +199,6 @@
 #define CONFIG_DOS_PARTITION
 #endif
 
-#define CONFIG_FSL_LAW                 /* Use common FSL init code */
 #define CONFIG_TSEC_ENET
 #define CONFIG_ENV_OVERWRITE
 
@@ -378,7 +375,7 @@ extern unsigned long get_sdram_size(void);
                                | CSPR_V)
 #define CONFIG_SYS_NAND_AMASK  IFC_AMASK(64*1024)
 
-#if defined(CONFIG_P1010RDB_PA)
+#if defined(CONFIG_TARGET_P1010RDB_PA)
 #define CONFIG_SYS_NAND_CSOR   (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
                                | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
                                | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
@@ -388,7 +385,7 @@ extern unsigned long get_sdram_size(void);
                                | CSOR_NAND_PB(32))     /* 32 Pages Per Block */
 #define CONFIG_SYS_NAND_BLOCK_SIZE     (16 * 1024)
 
-#elif defined(CONFIG_P1010RDB_PB)
+#elif defined(CONFIG_TARGET_P1010RDB_PB)
 #define CONFIG_SYS_NAND_ONFI_DETECTION
 #define CONFIG_SYS_NAND_CSOR   (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
                                | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
@@ -404,7 +401,7 @@ extern unsigned long get_sdram_size(void);
 #define CONFIG_SYS_MAX_NAND_DEVICE     1
 #define CONFIG_CMD_NAND
 
-#if defined(CONFIG_P1010RDB_PA)
+#if defined(CONFIG_TARGET_P1010RDB_PA)
 /* NAND Flash Timing Params */
 #define CONFIG_SYS_NAND_FTIM0          FTIM0_NAND_TCCST(0x01) | \
                                        FTIM0_NAND_TWP(0x0C)   | \
@@ -419,7 +416,7 @@ extern unsigned long get_sdram_size(void);
                                        FTIM2_NAND_TWHRE(0x0f)
 #define CONFIG_SYS_NAND_FTIM3          FTIM3_NAND_TWW(0x04)
 
-#elif defined(CONFIG_P1010RDB_PB)
+#elif defined(CONFIG_TARGET_P1010RDB_PB)
 /* support MT29F16G08ABABAWP 4k-pagesize 2G-bytes NAND */
 /* ONFI NAND Flash mode0 Timing Params */
 #define CONFIG_SYS_NAND_FTIM0  (FTIM0_NAND_TCCST(0x07)| \
@@ -592,7 +589,7 @@ extern unsigned long get_sdram_size(void);
 #define I2C_PCA9557_BUS_NUM            0
 
 /* I2C EEPROM */
-#if defined(CONFIG_P1010RDB_PB)
+#if defined(CONFIG_TARGET_P1010RDB_PB)
 #define CONFIG_ID_EEPROM
 #ifdef CONFIG_ID_EEPROM
 #define CONFIG_SYS_I2C_EEPROM_NXID
@@ -718,10 +715,10 @@ extern unsigned long get_sdram_size(void);
 #define CONFIG_ENV_SIZE                0x2000
 #define CONFIG_ENV_ADDR                (CONFIG_SYS_INIT_L2_ADDR + (160 << 10))
 #else
-#if defined(CONFIG_P1010RDB_PA)
+#if defined(CONFIG_TARGET_P1010RDB_PA)
 #define CONFIG_ENV_SIZE                CONFIG_SYS_NAND_BLOCK_SIZE
 #define CONFIG_ENV_RANGE       (3 * CONFIG_ENV_SIZE) /* 3*16=48K for env */
-#elif defined(CONFIG_P1010RDB_PB)
+#elif defined(CONFIG_TARGET_P1010RDB_PB)
 #define CONFIG_ENV_SIZE                (16 * 1024)
 #define CONFIG_ENV_RANGE       (32 * CONFIG_ENV_SIZE) /* new block size 512K */
 #endif
@@ -842,7 +839,7 @@ extern unsigned long get_sdram_size(void);
        "bootm $loadaddr $ramdiskaddr $fdtaddr\0"       \
        CONFIG_BOOTMODE
 
-#if defined(CONFIG_P1010RDB_PA)
+#if defined(CONFIG_TARGET_P1010RDB_PA)
 #define CONFIG_BOOTMODE \
        "boot_bank0=i2c dev 0; i2c mw 18 1 f1; i2c mw 18 3 f0;" \
        "mw.b ffb00011 0; mw.b ffb00009 0; reset\0" \
@@ -851,7 +848,7 @@ extern unsigned long get_sdram_size(void);
        "boot_nand=i2c dev 0; i2c mw 18 1 f9; i2c mw 18 3 f0;" \
        "mw.b ffb00011 0; mw.b ffb00017 1; reset\0"
 
-#elif defined(CONFIG_P1010RDB_PB)
+#elif defined(CONFIG_TARGET_P1010RDB_PB)
 #define CONFIG_BOOTMODE \
        "boot_bank0=i2c dev 0; i2c mw 18 1 fe; i2c mw 18 3 0;" \
        "i2c mw 19 1 2; i2c mw 19 3 e1; reset\0" \