powerpc/corenet_ds: move SATA config to board configuration

[platform/kernel/u-boot.git] / include / configs / P1010RDB.h

diff --git a/include/configs/P1010RDB.h b/include/configs/P1010RDB.h
index ff35fb1..437ee6e 100644 (file)
--- a/include/configs/P1010RDB.h
+++ b/include/configs/P1010RDB.h
@@ -59,6 +59,13 @@
 #endif /* CONFIG_NAND_SPL */
 #endif
 
+
+#ifdef CONFIG_NAND_SECBOOT     /* NAND Boot */
+#define CONFIG_RAMBOOT_NAND
+#define CONFIG_SYS_TEXT_BASE           0x11000000
+#define CONFIG_RESET_VECTOR_ADDRESS    0x1107fffc
+#endif
+
 #ifndef CONFIG_SYS_TEXT_BASE
 #define CONFIG_SYS_TEXT_BASE           0xeff80000
 #endif
@@ -174,7 +181,7 @@
 
 /* DDR Setup */
 #define CONFIG_FSL_DDR3
-#define CONFIG_DDR_RAW_TIMING
+#define CONFIG_SYS_DDR_RAW_TIMING
 #define CONFIG_DDR_SPD
 #define CONFIG_SYS_SPD_BUS_NUM         1
 #define SPD_EEPROM_ADDRESS             0x52
@@ -345,7 +352,7 @@ extern unsigned long get_sdram_size(void);
 #define CONFIG_SYS_NAND_DDR_LAW                11
 
 /* Set up IFC registers for boot location NOR/NAND */
-#ifdef CONFIG_NAND_U_BOOT
+#if defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SECBOOT)
 #define CONFIG_SYS_CSPR0               CONFIG_SYS_NAND_CSPR
 #define CONFIG_SYS_AMASK0              CONFIG_SYS_NAND_AMASK
 #define CONFIG_SYS_CSOR0               CONFIG_SYS_NAND_CSOR
@@ -446,7 +453,6 @@ extern unsigned long get_sdram_size(void);
 #define CONFIG_NS16550_MIN_FUNCTIONS
 #endif
 
-#define CONFIG_SERIAL_MULTI            /* Enable both serial ports */
 #define CONFIG_SYS_CONSOLE_IS_IN_ENV   /* determine from environment */
 
 #define CONFIG_SYS_BAUDRATE_TABLE      \
@@ -457,9 +463,6 @@ extern unsigned long get_sdram_size(void);
 
 /* Use the HUSH parser */
 #define CONFIG_SYS_HUSH_PARSER
-#ifdef CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
-#endif
 
 /*
  * Pass open firmware flat tree
@@ -501,7 +504,7 @@ extern unsigned long get_sdram_size(void);
  * SPI interface will not be available in case of NAND boot SPI CS0 will be
  * used for SLIC
  */
-#ifndef CONFIG_NAND_U_BOOT
+#if !defined(CONFIG_NAND_U_BOOT) || !defined(CONFIG_NAND_SECBOOT)
 /* eSPI - Enhanced SPI */
 #define CONFIG_FSL_ESPI
 #define CONFIG_SPI_FLASH
@@ -512,10 +515,6 @@ extern unsigned long get_sdram_size(void);
 #endif
 
 #if defined(CONFIG_TSEC_ENET)
-#ifndef CONFIG_NET_MULTI
-#define CONFIG_NET_MULTI
-#endif
-
 #define CONFIG_MII                     /* MII PHY management */
 #define CONFIG_MII_DEFAULT_TSEC        1       /* Allow unregistered phys */
 #define CONFIG_TSEC1   1
@@ -554,6 +553,7 @@ extern unsigned long get_sdram_size(void);
 
 /* SATA */
 #define CONFIG_FSL_SATA
+#define CONFIG_FSL_SATA_V2
 #define CONFIG_LIBATA
 
 #ifdef CONFIG_FSL_SATA
@@ -602,6 +602,7 @@ extern unsigned long get_sdram_size(void);
 #if defined(CONFIG_SYS_RAMBOOT)
 #if defined(CONFIG_RAMBOOT_SDCARD)
 #define CONFIG_ENV_IS_IN_MMC
+#define CONFIG_FSL_FIXED_MMC_LOCATION
 #define CONFIG_SYS_MMC_ENV_DEV         0
 #define CONFIG_ENV_SIZE                        0x2000
 #elif defined(CONFIG_RAMBOOT_SPIFLASH)
@@ -712,8 +713,8 @@ extern unsigned long get_sdram_size(void);
 #endif
 
 #define CONFIG_HOSTNAME                P1010RDB
-#define CONFIG_ROOTPATH                /opt/nfsroot
-#define CONFIG_BOOTFILE                uImage
+#define CONFIG_ROOTPATH                "/opt/nfsroot"
+#define CONFIG_BOOTFILE                "uImage"
 #define CONFIG_UBOOTPATH       u-boot.bin/* U-Boot image on TFTP server */
 
 /* default location for tftp and bootm */
@@ -725,9 +726,9 @@ extern unsigned long get_sdram_size(void);
 #define CONFIG_BAUDRATE                115200
 
 #define        CONFIG_EXTRA_ENV_SETTINGS                               \
-       "hwconfig=" MK_STR(CONFIG_DEF_HWCONFIG)  "\0"   \
+       "hwconfig=" __stringify(CONFIG_DEF_HWCONFIG)  "\0"      \
        "netdev=eth0\0"                                         \
-       "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0"                          \
+       "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"             \
        "loadaddr=1000000\0"                    \
        "consoledev=ttyS0\0"                            \
        "ramdiskaddr=2000000\0"                 \
@@ -762,4 +763,8 @@ extern unsigned long get_sdram_size(void);
 
 #define CONFIG_BOOTCOMMAND CONFIG_RAMBOOTCOMMAND
 
+#ifdef CONFIG_SECURE_BOOT
+#include <asm/fsl_secure_boot.h>
+#endif
+
 #endif /* __CONFIG_H */