sunxi: usb: Switch to Generic host controllers

[platform/kernel/u-boot.git] / include / configs / P1010RDB.h

diff --git a/include/configs/P1010RDB.h b/include/configs/P1010RDB.h
index c0b04d9..18f70f0 100644 (file)
--- a/include/configs/P1010RDB.h
+++ b/include/configs/P1010RDB.h
@@ -1,7 +1,6 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright 2010-2011 Freescale Semiconductor, Inc.
- *
- * SPDX-License-Identifier:    GPL-2.0+
  */
 
 /*
@@ -180,13 +179,11 @@
 #define CONFIG_PCI_SCAN_SHOW           /* show pci devices on startup */
 #endif
 
-#define CONFIG_TSEC_ENET
 #define CONFIG_ENV_OVERWRITE
 
 #define CONFIG_DDR_CLK_FREQ    66666666 /* DDRCLK on P1010 RDB */
 #define CONFIG_SYS_CLK_FREQ    66666666 /* SYSCLK for P1010 RDB */
 
-#define CONFIG_MISC_INIT_R
 #define CONFIG_HWCONFIG
 /*
  * These can be toggled for performance analysis, otherwise use default.
@@ -324,10 +321,7 @@ extern unsigned long get_sdram_size(void);
 #define CONFIG_SYS_FLASH_WRITE_TOUT    500     /* Flash Write Timeout (ms) */
 
 /* CFI for NOR Flash */
-#define CONFIG_FLASH_CFI_DRIVER
-#define CONFIG_SYS_FLASH_CFI
 #define CONFIG_SYS_FLASH_EMPTY_INFO
-#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 
 /* NAND Flash on IFC */
 #define CONFIG_SYS_NAND_BASE           0xff800000
@@ -337,7 +331,6 @@ extern unsigned long get_sdram_size(void);
 #define CONFIG_SYS_NAND_BASE_PHYS      CONFIG_SYS_NAND_BASE
 #endif
 
-#define CONFIG_MTD_DEVICE
 #define CONFIG_MTD_PARTITION
 
 #define CONFIG_SYS_NAND_CSPR   (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
@@ -467,7 +460,6 @@ extern unsigned long get_sdram_size(void);
 #if defined(CONFIG_RAMBOOT_SDCARD) || defined(CONFIG_RAMBOOT_SPIFLASH) || \
        defined(CONFIG_RAMBOOT_NAND)
 #define CONFIG_SYS_RAMBOOT
-#define CONFIG_SYS_EXTRA_ENV_RELOC
 #else
 #undef CONFIG_SYS_RAMBOOT
 #endif
@@ -478,8 +470,6 @@ extern unsigned long get_sdram_size(void);
 #endif
 #endif
 
-#define CONFIG_BOARD_EARLY_INIT_R
-
 #define CONFIG_SYS_INIT_RAM_LOCK
 #define CONFIG_SYS_INIT_RAM_ADDR       0xffd00000 /* stack in RAM */
 #define CONFIG_SYS_INIT_RAM_SIZE       0x00004000 /* End of used area in RAM */
@@ -502,7 +492,6 @@ extern unsigned long get_sdram_size(void);
 #define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
 #define CONFIG_SPL_RELOC_TEXT_BASE     0xD0001000
 #define CONFIG_SPL_RELOC_STACK         (CONFIG_SYS_INIT_L2_ADDR + 112 * 1024)
-#define CONFIG_SPL_RELOC_STACK_SIZE    (16 << 10)
 #define CONFIG_SPL_RELOC_MALLOC_ADDR   (CONFIG_SYS_INIT_L2_ADDR + 128 * 1024)
 #define CONFIG_SPL_RELOC_MALLOC_SIZE   (128 << 10)
 #define CONFIG_SPL_GD_ADDR             (CONFIG_SYS_INIT_L2_ADDR + 96 * 1024)
@@ -529,7 +518,6 @@ extern unsigned long get_sdram_size(void);
 #endif
 
 /* Serial Port */
-#define CONFIG_CONS_INDEX      1
 #undef CONFIG_SERIAL_SOFTWARE_FIFO
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE    1
@@ -588,7 +576,6 @@ extern unsigned long get_sdram_size(void);
 #endif
 
 #if defined(CONFIG_TSEC_ENET)
-#define CONFIG_MII                     /* MII PHY management */
 #define CONFIG_MII_DEFAULT_TSEC        1       /* Allow unregistered phys */
 #define CONFIG_TSEC1   1
 #define CONFIG_TSEC1_NAME      "eTSEC1"
@@ -637,7 +624,6 @@ extern unsigned long get_sdram_size(void);
 #endif /* #ifdef CONFIG_FSL_SATA  */
 
 #ifdef CONFIG_MMC
-#define CONFIG_FSL_ESDHC
 #define CONFIG_SYS_FSL_ESDHC_ADDR      CONFIG_SYS_MPC85xx_ESDHC_ADDR
 #endif
 
@@ -700,9 +686,6 @@ extern unsigned long get_sdram_size(void);
 /*
  * Miscellaneous configurable options
  */
-#define CONFIG_SYS_LONGHELP                    /* undef to save memory */
-#define CONFIG_CMDLINE_EDITING                 /* Command-line editing */
-#define CONFIG_AUTO_COMPLETE                   /* add autocompletion support */
 #define CONFIG_SYS_LOAD_ADDR   0x2000000       /* default load address */
 
 /*