i2c, ppc4xx_i2c: switch to new multibus/multiadapter support

[platform/kernel/u-boot.git] / include / configs / OCRTC.h

diff --git a/include/configs/OCRTC.h b/include/configs/OCRTC.h
index 2591f1d..1c15687 100644 (file)
--- a/include/configs/OCRTC.h
+++ b/include/configs/OCRTC.h
@@ -37,6 +37,8 @@
 #define CONFIG_4xx             1       /* ...member of PPC4xx family   */
 #define CONFIG_OCRTC           1       /* ...on a OCRTC board          */
 
+#define        CONFIG_SYS_TEXT_BASE    0xFFFD0000
+
 #define CONFIG_BOARD_EARLY_INIT_F 1    /* call board_early_init_f()    */
 
 #define CONFIG_SYS_CLK_FREQ    33000000 /* external frequency to pll   */
@@ -104,6 +106,12 @@
 #define CONFIG_SYS_MEMTEST_START       0x0400000       /* memtest works on     */
 #define CONFIG_SYS_MEMTEST_END         0x0C00000       /* 4 ... 12 MB in DRAM  */
 
+#define CONFIG_CONS_INDEX      1       /* Use UART0                    */
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE    1
+#define CONFIG_SYS_NS16550_CLK         get_serial_clock()
+
 #undef CONFIG_SYS_EXT_SERIAL_CLOCK            /* no external serial clock used */
 #define CONFIG_SYS_BASE_BAUD       691200
 
@@ -128,6 +136,7 @@
 #define PCI_HOST_AUTO  2               /* detected via arbiter enable  */
 
 #define CONFIG_PCI                     /* include pci support          */
+#define CONFIG_PCI_INDIRECT_BRIDGE     /* indirect PCI bridge support */
 #define CONFIG_PCI_HOST PCI_HOST_AUTO  /* select pci host function     */
 #define CONFIG_PCI_PNP                 /* do pci plug-and-play         */
                                        /* resource configuration       */
@@ -208,9 +217,11 @@
 /*-----------------------------------------------------------------------
  * I2C EEPROM (CAT24WC08) for environment
  */
-#define CONFIG_HARD_I2C                        /* I2c with hardware support */
-#define CONFIG_SYS_I2C_SPEED           400000  /* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SLAVE           0x7F
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_PPC4XX
+#define CONFIG_SYS_I2C_PPC4XX_CH0
+#define CONFIG_SYS_I2C_PPC4XX_SPEED_0          400000
+#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0          0x7F
 
 #define CONFIG_SYS_I2C_EEPROM_ADDR     0x50    /* EEPROM CAT28WC08             */
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1       /* Bytes of address             */
@@ -287,18 +298,8 @@
 #define CONFIG_SYS_OCM_DATA_SIZE       0x1000
 
 #define CONFIG_SYS_INIT_RAM_ADDR       CONFIG_SYS_OCM_DATA_ADDR /* inside of SDRAM             */
-#define CONFIG_SYS_INIT_RAM_END        CONFIG_SYS_OCM_DATA_SIZE /* End of used area in RAM     */
-#define CONFIG_SYS_GBL_DATA_SIZE      128  /* size in bytes reserved for initial data */
-#define CONFIG_SYS_GBL_DATA_OFFSET    (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_RAM_SIZE       CONFIG_SYS_OCM_DATA_SIZE /* Size of used area in RAM    */
+#define CONFIG_SYS_GBL_DATA_OFFSET    (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET      CONFIG_SYS_GBL_DATA_OFFSET
 
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01            /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM  0x02            /* Software reboot                      */
-
 #endif /* __CONFIG_H */