#define CONFIG_MPC850 1 /* This is a MPC850 CPU */
#define CONFIG_NETVIA 1 /* ...on a NetVia board */
-#undef CONFIG_NETVIA_PLL_CLOCK /* PLL or fixed crystal clock */
+#if !defined(CONFIG_NETVIA_VERSION) || CONFIG_NETVIA_VERSION == 1
#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */
#undef CONFIG_8xx_CONS_SMC2
#undef CONFIG_8xx_CONS_NONE
-#define CONFIG_BAUDRATE 115200 /* console baudrate = 115kbps */
-
-#ifdef CONFIG_NETVIA_PLL_CLOCK
-/* XXX make sure that you calculate these two correctly */
-#define CFG_GCLK_MF 1350
-#define CONFIG_8xx_GCLK_FREQ 44236800
#else
-#define CFG_GCLK_MF 1
-#define CONFIG_8xx_GCLK_FREQ 50000000
+#define CONFIG_8xx_CONS_NONE
+#define CONFIG_MAX3100_SERIAL
#endif
+#define CONFIG_BAUDRATE 115200 /* console baudrate = 115kbps */
+
+#define CONFIG_XIN 10000000
+#define CONFIG_8xx_GCLK_FREQ 80000000
+
#if 0
#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
#else
#undef CONFIG_CLOCKS_IN_MHZ /* clocks NOT passsed to Linux in MHz */
-#define CONFIG_PREBOOT "echo;echo Type \"run flash_nfs\" to mount root filesystem over NFS;echo"
+#define CONFIG_PREBOOT "echo;echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;echo"
#undef CONFIG_BOOTARGS
#define CONFIG_BOOTCOMMAND \
- "tftpboot; " \
- "setenv bootargs root=/dev/nfs rw nfsroot=$(serverip):$(rootpath) " \
- "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname)::off; " \
+ "tftpboot; " \
+ "setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \
+ "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; " \
"bootm"
#define CONFIG_LOADS_ECHO 0 /* echo off for serial download */
#define CONFIG_STATUS_LED 1 /* Status LED enabled */
+#if defined(CONFIG_NETVIA_VERSION) && CONFIG_NETVIA_VERSION >= 2
+#define CONFIG_BOARD_SPECIFIC_LED /* version has board specific leds */
+#endif
+
#undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */
-#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE)
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_NISDOMAIN
+
#undef CONFIG_MAC_PARTITION
#undef CONFIG_DOS_PARTITION
#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */
-#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
- CFG_CMD_DHCP )
-#define CONFIG_BOARD_PRE_INIT
-#define CONFIG_MISC_INIT_R
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_PING
+
+#if defined(CONFIG_NETVIA_VERSION) && CONFIG_NETVIA_VERSION >= 2
+#define CONFIG_CMD_NAND
+#endif
+
+
+#define CONFIG_BOARD_EARLY_INIT_F 1
+#define CONFIG_MISC_INIT_R
/*
* Miscellaneous configurable options
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
-#define CFG_ENV_IS_IN_FLASH 1
-#define CFG_ENV_OFFSET 0x8000 /* Offset of Environment Sector */
-#define CFG_ENV_SIZE 0x1000 /* Total Size of Environment Sector */
-#define CFG_ENV_SECT_SIZE 0x10000
+#define CONFIG_ENV_IS_IN_FLASH 1
+#define CONFIG_ENV_SECT_SIZE 0x10000
+
+#define CONFIG_ENV_ADDR (CFG_FLASH_BASE + 0x60000)
+#define CONFIG_ENV_OFFSET 0
+#define CONFIG_ENV_SIZE 0x4000
+
+#define CONFIG_ENV_ADDR_REDUND (CFG_FLASH_BASE + 0x70000)
+#define CONFIG_ENV_OFFSET_REDUND 0
+#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
/*-----------------------------------------------------------------------
* Cache Configuration
*/
#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */
#endif
* Reset PLL lock status sticky bit, timer expired status bit and timer
* interrupt status bit
*
- */
-
-#define CFG_PLPRCR ( ((CFG_GCLK_MF-1) << PLPRCR_MF_SHIFT) | PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
-
-/*-----------------------------------------------------------------------
+ *
+ *-----------------------------------------------------------------------
* SCCR - System Clock and reset Control Register 15-27
*-----------------------------------------------------------------------
* Set clock output, timebase and RTC source and divider,
* power management and some other internal clocks
*/
+
#define SCCR_MASK SCCR_EBDF11
+
+#if CONFIG_8xx_GCLK_FREQ == 50000000
+
+#define CFG_PLPRCR ( ((5 - 1) << PLPRCR_MF_SHIFT) | PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
#define CFG_SCCR (SCCR_TBS | \
SCCR_COM00 | SCCR_DFSYNC00 | SCCR_DFBRG00 | \
SCCR_DFNL000 | SCCR_DFNH000 | SCCR_DFLCD000 | \
SCCR_DFALCD00)
+#elif CONFIG_8xx_GCLK_FREQ == 80000000
+
+#define CFG_PLPRCR ( ((8 - 1) << PLPRCR_MF_SHIFT) | PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
+#define CFG_SCCR (SCCR_TBS | \
+ SCCR_COM00 | SCCR_DFSYNC00 | SCCR_DFBRG00 | \
+ SCCR_DFNL000 | SCCR_DFNH000 | SCCR_DFLCD000 | \
+ SCCR_DFALCD00 | SCCR_EBDF01)
+
+#endif
+
/*-----------------------------------------------------------------------
*
*-----------------------------------------------------------------------
#define CFG_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_PS_8 | BR_V )
/*
- * BR1/2 and OR1/2 (4MByte Flash Bank x 2)
- *
- */
-#define FLASH0_SIZE 0x00400000 /* 4MByte */
-#define FLASH0_BASE 0xF0000000
-
-#define CFG_OR1_PRELIM ((0xFFFFFFFFLU & ~(FLASH0_SIZE - 1)) | OR_CSNT_SAM | OR_BI | OR_SCY_5_CLK | OR_TRLX)
-#define CFG_BR1_PRELIM ((FLASH0_BASE & BR_BA_MSK) | BR_PS_32 | BR_V)
-
-#define FLASH1_SIZE 0x00400000
-#define FLASH1_BASE 0xF0400000
-
-#define CFG_OR2_PRELIM ((0xFFFFFFFFLU & ~(FLASH1_SIZE - 1)) | OR_CSNT_SAM | OR_BI | OR_SCY_5_CLK | OR_TRLX)
-#define CFG_BR2_PRELIM ((FLASH1_BASE & BR_BA_MSK) | BR_PS_32 | BR_V)
-
-/*
* BR3 and OR3 (SDRAM)
*
*/
#define CFG_BR3_PRELIM ((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_PS_32 | BR_V)
/*
- * BR6 (External register)
- * 16 bit port size - leds are at high 8 bits
- */
-#define EXTREG_BASE 0x30000000 /* external register */
-#define EXTREG_SIZE 0x00010000 /* max 64K */
-
-#define CFG_OR6_PRELIM ((0xFFFFFFFFLU & ~(EXTREG_SIZE - 1)) | OR_CSNT_SAM | OR_BI | OR_SCY_15_CLK | OR_TRLX)
-#define CFG_BR6_PRELIM ((EXTREG_BASE & BR_BA_MSK) | BR_PS_32 | BR_V)
-
-/*
* Memory Periodic Timer Prescaler
*/
/* Ethernet at SCC2 */
#define CONFIG_SCC2_ENET
+/****************************************************************/
+
+#define DSP_SIZE 0x00010000 /* 64K */
+#define FPGA_SIZE 0x00010000 /* 64K */
+
+#define DSP0_BASE 0xF1000000
+#define DSP1_BASE (DSP0_BASE + DSP_SIZE)
+#define FPGA_BASE (DSP1_BASE + DSP_SIZE)
+
+#if defined(CONFIG_NETVIA_VERSION) && CONFIG_NETVIA_VERSION >= 2
+
+#define ER_SIZE 0x00010000 /* 64K */
+#define ER_BASE (FPGA_BASE + FPGA_SIZE)
+
+#define NAND_SIZE 0x00010000 /* 64K */
+#define NAND_BASE (ER_BASE + ER_SIZE)
+
+#endif
+
+/****************************************************************/
+
+#if defined(CONFIG_NETVIA_VERSION) && CONFIG_NETVIA_VERSION >= 2
+
+#define STATUS_LED_BIT 0x00000001 /* bit 31 */
+#define STATUS_LED_PERIOD (CFG_HZ / 2)
+#define STATUS_LED_STATE STATUS_LED_BLINKING
+
+#define STATUS_LED_BIT1 0x00000002 /* bit 30 */
+#define STATUS_LED_PERIOD1 (CFG_HZ / 2)
+#define STATUS_LED_STATE1 STATUS_LED_OFF
+
+#define STATUS_LED_ACTIVE 0 /* LED on for bit == 0 */
+#define STATUS_LED_BOOT 0 /* LED 0 used for boot status */
+
+#endif
+
+/*****************************************************************************/
+
+#define CONFIG_NAND_LEGACY
+
+#if defined(CONFIG_NETVIA_VERSION) && CONFIG_NETVIA_VERSION >= 2
+
+/* NAND */
+#define CFG_NAND_BASE NAND_BASE
+#define CONFIG_MTD_NAND_ECC_JFFS2
+
+#define CFG_MAX_NAND_DEVICE 1
+
+#define SECTORSIZE 512
+#define ADDR_COLUMN 1
+#define ADDR_PAGE 2
+#define ADDR_COLUMN_PAGE 3
+#define NAND_ChipID_UNKNOWN 0x00
+#define NAND_MAX_FLOORS 1
+#define NAND_MAX_CHIPS 1
+
+#define NAND_DISABLE_CE(nand) \
+ do { \
+ (((volatile immap_t *)CFG_IMMR)->im_ioport.iop_pddat) |= 0x0040; \
+ } while(0)
+
+#define NAND_ENABLE_CE(nand) \
+ do { \
+ (((volatile immap_t *)CFG_IMMR)->im_ioport.iop_pddat) &= ~0x0040; \
+ } while(0)
+
+#define NAND_CTL_CLRALE(nandptr) \
+ do { \
+ (((volatile immap_t *)CFG_IMMR)->im_ioport.iop_pddat) &= ~0x0100; \
+ } while(0)
+
+#define NAND_CTL_SETALE(nandptr) \
+ do { \
+ (((volatile immap_t *)CFG_IMMR)->im_ioport.iop_pddat) |= 0x0100; \
+ } while(0)
+
+#define NAND_CTL_CLRCLE(nandptr) \
+ do { \
+ (((volatile immap_t *)CFG_IMMR)->im_ioport.iop_pddat) &= ~0x0080; \
+ } while(0)
+
+#define NAND_CTL_SETCLE(nandptr) \
+ do { \
+ (((volatile immap_t *)CFG_IMMR)->im_ioport.iop_pddat) |= 0x0080; \
+ } while(0)
+
+#define NAND_WAIT_READY(nand) \
+ do { \
+ while ((((volatile immap_t *)CFG_IMMR)->im_ioport.iop_pcdat & 0x100) == 0) \
+ ; \
+ } while (0)
+
+#define WRITE_NAND_COMMAND(d, adr) \
+ do { \
+ *(volatile unsigned char *)((unsigned long)(adr)) = (unsigned char)(d); \
+ } while(0)
+
+#define WRITE_NAND_ADDRESS(d, adr) \
+ do { \
+ *(volatile unsigned char *)((unsigned long)(adr)) = (unsigned char)(d); \
+ } while(0)
+
+#define WRITE_NAND(d, adr) \
+ do { \
+ *(volatile unsigned char *)((unsigned long)(adr)) = (unsigned char)(d); \
+ } while(0)
+
+#define READ_NAND(adr) \
+ ((unsigned char)(*(volatile unsigned char *)(unsigned long)(adr)))
+
+#endif
+
+/*****************************************************************************/
+
+#ifndef __ASSEMBLY__
+
+#if defined(CONFIG_NETVIA_VERSION) && CONFIG_NETVIA_VERSION >= 2
+
+/* LEDs */
+
+/* last value written to the external register; we cannot read back */
+extern unsigned int last_er_val;
+
+/* led_id_t is unsigned long mask */
+typedef unsigned int led_id_t;
+
+static inline void __led_init(led_id_t mask, int state)
+{
+ unsigned int new_er_val;
+
+ if (state)
+ new_er_val = last_er_val & ~mask;
+ else
+ new_er_val = last_er_val | mask;
+
+ *(volatile unsigned int *)ER_BASE = new_er_val;
+ last_er_val = new_er_val;
+}
+
+static inline void __led_toggle(led_id_t mask)
+{
+ unsigned int new_er_val;
+
+ new_er_val = last_er_val ^ mask;
+ *(volatile unsigned int *)ER_BASE = new_er_val;
+ last_er_val = new_er_val;
+}
+
+static inline void __led_set(led_id_t mask, int state)
+{
+ unsigned int new_er_val;
+
+ if (state)
+ new_er_val = last_er_val & ~mask;
+ else
+ new_er_val = last_er_val | mask;
+
+ *(volatile unsigned int *)ER_BASE = new_er_val;
+ last_er_val = new_er_val;
+}
+
+/* MAX3100 console */
+#define MAX3100_SPI_RXD_PORT (((volatile immap_t *)CFG_IMMR)->im_cpm.cp_pbdat)
+#define MAX3100_SPI_RXD_BIT 0x00000008
+
+#define MAX3100_SPI_TXD_PORT (((volatile immap_t *)CFG_IMMR)->im_cpm.cp_pbdat)
+#define MAX3100_SPI_TXD_BIT 0x00000004
+
+#define MAX3100_SPI_CLK_PORT (((volatile immap_t *)CFG_IMMR)->im_cpm.cp_pbdat)
+#define MAX3100_SPI_CLK_BIT 0x00000002
+
+#define MAX3100_CS_PORT (((volatile immap_t *)CFG_IMMR)->im_ioport.iop_pddat)
+#define MAX3100_CS_BIT 0x0010
+
+#endif
+
+#endif
+
+/*************************************************************************************************/
+
#endif /* __CONFIG_H */
projects / platform / kernel / u-boot.git / blobdiff