#define MV_VERSION "v0.2.0"
/* LED0 = Power , LED1 = Error , LED2-5 = error code, LED6-7=00 -->PPCBoot error */
-#define ERR_NONE 0
-#define ERR_ENV 1
-#define ERR_BOOTM_BADMAGIC 2
-#define ERR_BOOTM_BADCRC 3
-#define ERR_BOOTM_GUNZIP 4
+#define ERR_NONE 0
+#define ERR_ENV 1
+#define ERR_BOOTM_BADMAGIC 2
+#define ERR_BOOTM_BADCRC 3
+#define ERR_BOOTM_GUNZIP 4
#define ERR_BOOTP_TIMEOUT 5
-#define ERR_DHCP 6
-#define ERR_TFTP 7
-#define ERR_NOLAN 8
-#define ERR_LANDRV 9
+#define ERR_DHCP 6
+#define ERR_TFTP 7
+#define ERR_NOLAN 8
+#define ERR_LANDRV 9
#define CONFIG_BOARD_TYPES 1
#define MVBLUE_BOARD_BOX 1
#define MVBLUE_BOARD_LYNX 2
+#define CONFIG_SYS_TEXT_BASE 0xFFF00000
+#define CONFIG_SYS_LDSCRIPT "board/mvblue/u-boot.lds"
+
#if 0
#define ERR_LED(code) do { if (code) \
- *(volatile char *)(0xff000003) = ( 3 | (code<<4) ) & 0xf3; \
- else \
- *(volatile char *)(0xff000003) = ( 1 ); \
- } while(0)
+ *(volatile char *)(0xff000003) = ( 3 | (code<<4) ) & 0xf3; \
+ else \
+ *(volatile char *)(0xff000003) = ( 1 ); \
+} while(0)
#else
#define ERR_LED(code)
#endif
-#undef DEBUG
-
#define CONFIG_MPC824X 1
#define CONFIG_MPC8245 1
#define CONFIG_MVBLUE 1
#define CONFIG_CLOCKS_IN_MHZ 1
-#define CONFIG_BOARD_TYPES 1
+#define CONFIG_BOARD_TYPES 1
#define CONFIG_CONS_INDEX 1
#define CONFIG_BAUDRATE 115200
-#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-#define CONFIG_BOOTDELAY 3
+#define CONFIG_BOOTDELAY 3
#define CONFIG_BOOT_RETRY_TIME -1
#define CONFIG_AUTOBOOT_KEYED
-#define CONFIG_AUTOBOOT_PROMPT "autoboot in %d seconds (stop with 's')...\n"
+#define CONFIG_AUTOBOOT_PROMPT \
+ "autoboot in %d seconds (stop with 's')...\n", bootdelay
#define CONFIG_AUTOBOOT_STOP_STR "s"
#define CONFIG_ZERO_BOOTDELAY_CHECK
#define CONFIG_RESET_TO_RETRY 60
-#define CONFIG_COMMANDS ( CFG_CMD_ASKENV | CFG_CMD_BOOTD | CFG_CMD_CACHE | CFG_CMD_DHCP | \
- CFG_CMD_ECHO | CFG_CMD_ENV | CFG_CMD_FLASH | CFG_CMD_IMI | \
- CFG_CMD_IRQ | CFG_CMD_NET | CFG_CMD_PCI | CFG_CMD_RUN )
+
+/*
+ * Command line configuration.
+ */
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_BOOTD
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_ECHO
+#define CONFIG_CMD_SAVEENV
+#define CONFIG_CMD_FLASH
+#define CONFIG_CMD_IMI
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_RUN
-#define CONFIG_BOOTP_MASK ( 0xffffffff )
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_NISDOMAIN
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_DNS
+#define CONFIG_BOOTP_DNS2
+#define CONFIG_BOOTP_SEND_HOSTNAME
+#define CONFIG_BOOTP_NTPSERVER
+#define CONFIG_BOOTP_TIMEOFFSET
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
/*
* Miscellaneous configurable options
*/
-#define CFG_LONGHELP /* undef to save memory */
-#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#define CONFIG_SYS_LONGHELP /* undef to save memory */
+#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
+#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)
-#define CFG_MAXARGS 16 /* Max number of command args */
-#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
-#define CFG_LOAD_ADDR 0x00100000 /* Default load address */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_MAXARGS 16 /* Max number of command args */
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
+#define CONFIG_SYS_LOAD_ADDR 0x00100000 /* Default load address */
-#define CONFIG_BOOTCOMMAND "run nfsboot"
+#define CONFIG_BOOTCOMMAND "run nfsboot"
#define CONFIG_BOOTARGS "root=/dev/mtdblock5 ro rootfstype=jffs2"
-#define CONFIG_NFSBOOTCOMMAND "bootp; run nfsargs addcons;bootm"
+#define CONFIG_NFSBOOTCOMMAND "bootp; run nfsargs addcons;bootm"
#define CONFIG_EXTRA_ENV_SETTINGS \
"console_nr=0\0" \
"flashboot=setenv bootargs root=/dev/mtdblock5 ro rootfstype=jffs2;run addcons;bootm ffc00000\0" \
"safeboot=setenv bootargs root=/dev/mtdblock2 rw rootfstype=cramfs;run addcons;bootm ffc00000\0" \
"hdboot=setenv bootargs root=/dev/hda1;run addcons;bootm ffc00000\0" \
- "nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=$(serverip):$(rootpath) " \
- "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname)::off\0" \
- "addcons=setenv bootargs $(bootargs) console=ttyS$(console_nr),$(baudrate)N8\0" \
+ "nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \
+ "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off\0" \
+ "addcons=setenv bootargs ${bootargs} console=ttyS${console_nr},${baudrate}N8\0" \
"mv_version=" MV_VERSION "\0" \
"bootretry=30\0"
#define CONFIG_PCI_PNP
#define CONFIG_PCI_SCAN_SHOW
-#define CONFIG_NET_MULTI
-#define CONFIG_NET_RETRY_COUNT 5
+#define CONFIG_NET_RETRY_COUNT 5
#define CONFIG_TULIP
#define CONFIG_TULIP_FIX_DAVICOM 1
-#define CONFIG_ETHADDR b6:b4:45:eb:fb:c0
+#define CONFIG_ETHADDR b6:b4:45:eb:fb:c0
#define CONFIG_HW_WATCHDOG
/*-----------------------------------------------------------------------
* Start addresses for the final memory configuration
* (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
*/
-#define CFG_SDRAM_BASE 0x00000000
+#define CONFIG_SYS_SDRAM_BASE 0x00000000
-#define CFG_FLASH_BASE 0xFFF00000
-#define CFG_MONITOR_BASE TEXT_BASE
+#define CONFIG_SYS_FLASH_BASE 0xFFF00000
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
-#define CFG_RESET_ADDRESS 0xFFF00100
-#define CFG_EUMB_ADDR 0xFC000000
+#define CONFIG_SYS_RESET_ADDRESS 0xFFF00100
+#define CONFIG_SYS_EUMB_ADDR 0xFC000000
-#define CFG_MONITOR_LEN 0x00100000
-#define CFG_MALLOC_LEN (512 << 10) /* Reserve some kB for malloc() */
+#define CONFIG_SYS_MONITOR_LEN 0x00100000
+#define CONFIG_SYS_MALLOC_LEN (512 << 10) /* Reserve some kB for malloc() */
-#define CFG_MEMTEST_START 0x00100000 /* memtest works on */
-#define CFG_MEMTEST_END 0x00800000 /* 1M ... 8M in DRAM */
+#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */
+#define CONFIG_SYS_MEMTEST_END 0x00800000 /* 1M ... 8M in DRAM */
/* Maximum amount of RAM. */
-#define CFG_MAX_RAM_SIZE 0x10000000 /* 0 .. 256MB of (S)DRAM */
+#define CONFIG_SYS_MAX_RAM_SIZE 0x10000000 /* 0 .. 256MB of (S)DRAM */
-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
-#undef CFG_RAMBOOT
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
+#undef CONFIG_SYS_RAMBOOT
#else
-#define CFG_RAMBOOT
+#define CONFIG_SYS_RAMBOOT
#endif
-#define CFG_ISA_IO 0xFE000000
+#define CONFIG_SYS_ISA_IO 0xFE000000
/*
* serial configuration
*/
-#define CFG_NS16550
-#define CFG_NS16550_SERIAL
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
-#define CFG_NS16550_REG_SIZE 1
+#define CONFIG_SYS_NS16550_REG_SIZE 1
-#define CFG_NS16550_CLK get_bus_freq(0)
+#define CONFIG_SYS_NS16550_CLK get_bus_freq(0)
-#define CFG_NS16550_COM1 (CFG_EUMB_ADDR + 0x4500)
-#define CFG_NS16550_COM2 (CFG_EUMB_ADDR + 0x4600)
+#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_EUMB_ADDR + 0x4500)
+#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_EUMB_ADDR + 0x4600)
/*-----------------------------------------------------------------------
* Definitions for initial stack pointer and data area
*/
-#define CFG_INIT_RAM_ADDR 0x40000000
-#define CFG_INIT_RAM_END 0x1000
-#define CFG_GBL_DATA_SIZE 128
-#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000
+#define CONFIG_SYS_INIT_RAM_SIZE 0x1000
+#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
/*
* Low Level Configuration Settings
*/
#define CONFIG_SYS_CLK_FREQ 33000000
-#define CFG_HZ 10000
+#define CONFIG_SYS_HZ 10000
/* Bit-field values for MCCR1. */
-#define CFG_ROMNAL 7
-#define CFG_ROMFAL 11
+#define CONFIG_SYS_ROMNAL 7
+#define CONFIG_SYS_ROMFAL 11
/* Bit-field values for MCCR2. */
-#define CFG_TSWAIT 0x5
-#define CFG_REFINT 430
+#define CONFIG_SYS_TSWAIT 0x5
+#define CONFIG_SYS_REFINT 430
/* Burst To Precharge. Bits of this value go to MCCR3 and MCCR4. */
-#define CFG_BSTOPRE 121
+#define CONFIG_SYS_BSTOPRE 121
/* Bit-field values for MCCR3. */
-#define CFG_REFREC 8
+#define CONFIG_SYS_REFREC 8
/* Bit-field values for MCCR4. */
-#define CFG_PRETOACT 3
-#define CFG_ACTTOPRE 5
-#define CFG_ACTORW 3
-#define CFG_SDMODE_CAS_LAT 3
-#define CFG_REGISTERD_TYPE_BUFFER 1
-#define CFG_EXTROM 1
-#define CFG_REGDIMM 0
-#define CFG_DBUS_SIZE2 1
-#define CFG_SDMODE_WRAP 0
-
-#define CFG_PGMAX 0x32
-#define CFG_SDRAM_DSCD 0x20
+#define CONFIG_SYS_PRETOACT 3
+#define CONFIG_SYS_ACTTOPRE 5
+#define CONFIG_SYS_ACTORW 3
+#define CONFIG_SYS_SDMODE_CAS_LAT 3
+#define CONFIG_SYS_REGISTERD_TYPE_BUFFER 1
+#define CONFIG_SYS_EXTROM 1
+#define CONFIG_SYS_REGDIMM 0
+#define CONFIG_SYS_DBUS_SIZE2 1
+#define CONFIG_SYS_SDMODE_WRAP 0
+
+#define CONFIG_SYS_PGMAX 0x32
+#define CONFIG_SYS_SDRAM_DSCD 0x20
/* Memory bank settings.
* Only bits 20-29 are actually used from these vales to set the
* address. Refer to the MPC8240 book.
*/
-#define CFG_BANK0_START 0x00000000
-#define CFG_BANK0_END (CFG_MAX_RAM_SIZE - 1)
-#define CFG_BANK0_ENABLE 1
-#define CFG_BANK1_START 0x3ff00000
-#define CFG_BANK1_END 0x3fffffff
-#define CFG_BANK1_ENABLE 0
-#define CFG_BANK2_START 0x3ff00000
-#define CFG_BANK2_END 0x3fffffff
-#define CFG_BANK2_ENABLE 0
-#define CFG_BANK3_START 0x3ff00000
-#define CFG_BANK3_END 0x3fffffff
-#define CFG_BANK3_ENABLE 0
-#define CFG_BANK4_START 0x3ff00000
-#define CFG_BANK4_END 0x3fffffff
-#define CFG_BANK4_ENABLE 0
-#define CFG_BANK5_START 0x3ff00000
-#define CFG_BANK5_END 0x3fffffff
-#define CFG_BANK5_ENABLE 0
-#define CFG_BANK6_START 0x3ff00000
-#define CFG_BANK6_END 0x3fffffff
-#define CFG_BANK6_ENABLE 0
-#define CFG_BANK7_START 0x3ff00000
-#define CFG_BANK7_END 0x3fffffff
-#define CFG_BANK7_ENABLE 0
-
-#define CFG_ODCR 0xff
-
-#define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
-
-#define CFG_IBAT1L (CFG_INIT_RAM_ADDR | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CFG_IBAT1U (CFG_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
-
-#define CFG_IBAT2L (0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
-#define CFG_IBAT2U (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP)
-
-#define CFG_IBAT3L (0xF0000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
-#define CFG_IBAT3U (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
-
-#define CFG_DBAT0L CFG_IBAT0L
-#define CFG_DBAT0U CFG_IBAT0U
-#define CFG_DBAT1L CFG_IBAT1L
-#define CFG_DBAT1U CFG_IBAT1U
-#define CFG_DBAT2L CFG_IBAT2L
-#define CFG_DBAT2U CFG_IBAT2U
-#define CFG_DBAT3L CFG_IBAT3L
-#define CFG_DBAT3U CFG_IBAT3U
+#define CONFIG_SYS_BANK0_START 0x00000000
+#define CONFIG_SYS_BANK0_END (CONFIG_SYS_MAX_RAM_SIZE - 1)
+#define CONFIG_SYS_BANK0_ENABLE 1
+#define CONFIG_SYS_BANK1_START 0x3ff00000
+#define CONFIG_SYS_BANK1_END 0x3fffffff
+#define CONFIG_SYS_BANK1_ENABLE 0
+#define CONFIG_SYS_BANK2_START 0x3ff00000
+#define CONFIG_SYS_BANK2_END 0x3fffffff
+#define CONFIG_SYS_BANK2_ENABLE 0
+#define CONFIG_SYS_BANK3_START 0x3ff00000
+#define CONFIG_SYS_BANK3_END 0x3fffffff
+#define CONFIG_SYS_BANK3_ENABLE 0
+#define CONFIG_SYS_BANK4_START 0x3ff00000
+#define CONFIG_SYS_BANK4_END 0x3fffffff
+#define CONFIG_SYS_BANK4_ENABLE 0
+#define CONFIG_SYS_BANK5_START 0x3ff00000
+#define CONFIG_SYS_BANK5_END 0x3fffffff
+#define CONFIG_SYS_BANK5_ENABLE 0
+#define CONFIG_SYS_BANK6_START 0x3ff00000
+#define CONFIG_SYS_BANK6_END 0x3fffffff
+#define CONFIG_SYS_BANK6_ENABLE 0
+#define CONFIG_SYS_BANK7_START 0x3ff00000
+#define CONFIG_SYS_BANK7_END 0x3fffffff
+#define CONFIG_SYS_BANK7_ENABLE 0
+
+#define CONFIG_SYS_ODCR 0xff
+
+#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+
+#define CONFIG_SYS_IBAT1L (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT1U (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
+
+#define CONFIG_SYS_IBAT2L (0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_IBAT2U (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP)
+
+#define CONFIG_SYS_IBAT3L (0xF0000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_IBAT3U (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
+
+#define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L
+#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U
+#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L
+#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U
+#define CONFIG_SYS_DBAT2L CONFIG_SYS_IBAT2L
+#define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U
+#define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L
+#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U
/*
* For booting Linux, the board info and command line data
* have to be in the first 8 MB of memory, since this is
* the maximum mapped by the Linux kernel during initialization.
*/
-#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
/*-----------------------------------------------------------------------
* FLASH organization
*/
-#undef CFG_FLASH_PROTECTION
-#define CFG_MAX_FLASH_BANKS 1 /* Max number of flash banks */
-#define CFG_MAX_FLASH_SECT 63 /* Max number of sectors per flash */
+#undef CONFIG_SYS_FLASH_PROTECTION
+#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* Max number of flash banks */
+#define CONFIG_SYS_MAX_FLASH_SECT 63 /* Max number of sectors per flash */
-#define CFG_FLASH_ERASE_TOUT 12000
-#define CFG_FLASH_WRITE_TOUT 1000
+#define CONFIG_SYS_FLASH_ERASE_TOUT 12000
+#define CONFIG_SYS_FLASH_WRITE_TOUT 1000
-#define CFG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_IS_IN_FLASH
-#define CFG_ENV_OFFSET 0x00010000
-#define CFG_ENV_SIZE 0x00010000
-#define CFG_ENV_SECT_SIZE 0x00010000
+#define CONFIG_ENV_OFFSET 0x00010000
+#define CONFIG_ENV_SIZE 0x00010000
+#define CONFIG_ENV_SECT_SIZE 0x00010000
/*-----------------------------------------------------------------------
* Cache Configuration
*/
-#define CFG_CACHELINE_SIZE 32
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
+#define CONFIG_SYS_CACHELINE_SIZE 32
+#if defined(CONFIG_CMD_KGDB)
+#define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM 0x02 /* Software reboot */
-
#endif /* __CONFIG_H */