imx8m: config: convert to bootm_size

[platform/kernel/u-boot.git] / include / configs / MPC8641HPCN.h

diff --git a/include/configs/MPC8641HPCN.h b/include/configs/MPC8641HPCN.h
index 489f599..e6e1e79 100644 (file)
--- a/include/configs/MPC8641HPCN.h
+++ b/include/configs/MPC8641HPCN.h
@@ -15,9 +15,10 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#include <linux/stringify.h>
+
 /* High Level Configuration Options */
 #define CONFIG_LINUX_RESET_VEC 0x100   /* Reset vector used by Linux */
-#define CONFIG_ADDR_MAP                1       /* Use addr map */
 
 /*
  * default CCSRBAR is at 0xff700000
@@ -42,11 +43,7 @@
 #define CONFIG_FSL_PCI_INIT    1       /* Use common FSL init code */
 #define CONFIG_SYS_PCI_64BIT   1       /* enable 64-bit PCI resources */
 
-#define CONFIG_ENV_OVERWRITE
-
 #define CONFIG_BAT_RW          1       /* Use common BAT rw code */
-#define CONFIG_HIGH_BATS       1       /* High BATs supported and enabled */
-#define CONFIG_SYS_NUM_ADDR_MAP 8      /* Number of addr map slots = 8 dbats */
 
 #define CONFIG_ALTIVEC         1
 
@@ -64,9 +61,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_SYS_CLK_FREQ    get_board_sys_clk(0)
 #endif
 
-#define CONFIG_SYS_MEMTEST_START       0x00200000      /* memtest region */
-#define CONFIG_SYS_MEMTEST_END         0x00400000
-
 /*
  * With the exception of PCI Memory and Rapid IO, most devices will simply
  * add CONFIG_SYS_PHYS_ADDR_HIGH to the front of the 32-bit VA to get the PA
@@ -97,7 +91,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 /*
  * DDR Setup
  */
-#define CONFIG_FSL_DDR_INTERACTIVE
 #define CONFIG_SPD_EEPROM              /* Use SPD EEPROM for DDR setup */
 #define CONFIG_DDR_SPD
 
@@ -211,8 +204,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_SYS_MONITOR_BASE                CONFIG_SYS_TEXT_BASE    /* start of monitor */
 #define CONFIG_SYS_MONITOR_BASE_EARLY   0xfff00000     /* early monitor loc */
 
-#define CONFIG_FLASH_CFI_DRIVER
-#define CONFIG_SYS_FLASH_CFI
 #define CONFIG_SYS_FLASH_EMPTY_INFO
 
 #if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
@@ -226,8 +217,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_SYS_SDRAM_SIZE  256
 #endif
 
-#undef CONFIG_CLOCKS_IN_MHZ
-
 #define CONFIG_SYS_INIT_RAM_LOCK       1
 #ifndef CONFIG_SYS_INIT_RAM_LOCK
 #define CONFIG_SYS_INIT_RAM_ADDR       0x0fd00000      /* Initial RAM address */
@@ -339,8 +328,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 
 #define CONFIG_PCI_SCAN_SHOW           /* show pci devices on startup */
 
-#undef CONFIG_EEPRO100
-#undef CONFIG_TULIP
 
 /************************************************************
  * USB support
@@ -373,15 +360,11 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_SYS_SCSI_MAX_SCSI_ID    4
 #define CONFIG_SYS_SCSI_MAX_LUN        1
 #define CONFIG_SYS_SCSI_MAX_DEVICE     (CONFIG_SYS_SCSI_MAX_SCSI_ID * CONFIG_SYS_SCSI_MAX_LUN)
-#define CONFIG_SYS_SCSI_MAXDEVICE      CONFIG_SYS_SCSI_MAX_DEVICE
 #endif
 
 #endif /* CONFIG_PCI */
 
 #if defined(CONFIG_TSEC_ENET)
-
-#define CONFIG_MII             1       /* MII PHY management */
-
 #define CONFIG_TSEC1           1
 #define CONFIG_TSEC1_NAME      "eTSEC1"
 #define CONFIG_TSEC2           1
@@ -553,14 +536,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 /*
  * Environment
  */
-#ifndef CONFIG_SYS_RAMBOOT
-    #define CONFIG_ENV_ADDR            \
-                       (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
-    #define CONFIG_ENV_SECT_SIZE               0x10000 /* 64K(one sector) for env */
-#else
-    #define CONFIG_ENV_ADDR            (CONFIG_SYS_MONITOR_BASE - 0x1000)
-#endif
-#define CONFIG_ENV_SIZE                0x2000
 
 #define CONFIG_LOADS_ECHO      1       /* echo on for serial download */
 #define CONFIG_SYS_LOADS_BAUD_CHANGE   1       /* allow baudrate change */