common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL

[platform/kernel/u-boot.git] / include / configs / MPC8641HPCN.h

diff --git a/include/configs/MPC8641HPCN.h b/include/configs/MPC8641HPCN.h
index ceb8e54..12a8f60 100644 (file)
--- a/include/configs/MPC8641HPCN.h
+++ b/include/configs/MPC8641HPCN.h
@@ -36,16 +36,15 @@
 #define CONFIG_MPC86xx         1       /* MPC86xx */
 #define CONFIG_MPC8641         1       /* MPC8641 specific */
 #define CONFIG_MPC8641HPCN     1       /* MPC8641HPCN board specific */
-#define CONFIG_NUM_CPUS                2       /* Number of CPUs in the system */
+#define CONFIG_MP              1       /* support multiple processors */
 #define CONFIG_LINUX_RESET_VEC 0x100   /* Reset vector used by Linux */
 /*#define CONFIG_PHYS_64BIT    1*/     /* Place devices in 36-bit space */
+#define CONFIG_ADDR_MAP                1       /* Use addr map */
 
 #ifdef RUN_DIAG
 #define CONFIG_SYS_DIAG_ADDR        CONFIG_SYS_FLASH_BASE
 #endif
 
-#define CONFIG_SYS_RESET_ADDRESS    0xfff00100
-
 /*
  * virtual address to be used for temporary mappings.  There
  * should be 128k free at this VA.
@@ -70,6 +69,7 @@
 #define CONFIG_ENV_OVERWRITE
 
 #define CONFIG_HIGH_BATS       1       /* High BATs supported and enabled */
+#define CONFIG_SYS_NUM_ADDR_MAP 8      /* Number of addr map slots = 8 dbats */
 
 #define CONFIG_ALTIVEC         1
 
@@ -141,8 +141,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_SYS_MAX_DDR_BAT_SIZE    0x80000000      /* BAT mapping size */
 #define CONFIG_VERY_BIG_RAM
 
-#define MPC86xx_DDR_SDRAM_CLK_CNTL
-
 #define CONFIG_NUM_DDR_CONTROLLERS     2
 #define CONFIG_DIMM_SLOTS_PER_CTLR     2
 #define CONFIG_CHIP_SELECTS_PER_CTRL   (2 * CONFIG_DIMM_SLOTS_PER_CTLR)
@@ -223,6 +221,8 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #define PIXIS_VCFGEN0          0x12    /* VELA Config Enable 0 */
 #define PIXIS_VCFGEN1          0x13    /* VELA Config Enable 1 */
 #define PIXIS_VBOOT            0x16    /* VELA VBOOT Register */
+#define PIXIS_VBOOT_FMAP       0x80    /* VBOOT - CFG_FLASHMAP */
+#define PIXIS_VBOOT_FBANK      0x40    /* VBOOT - CFG_FLASHBANK */
 #define PIXIS_VSPEED0          0x17    /* VELA VSpeed 0 */
 #define PIXIS_VSPEED1          0x18    /* VELA VSpeed 1 */
 #define PIXIS_VCLKH            0x19    /* VELA VCLKH register */
@@ -301,10 +301,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_OF_BOARD_SETUP          1
 #define CONFIG_OF_STDOUT_VIA_ALIAS     1
 
-
-#define CONFIG_SYS_64BIT_VSPRINTF      1
-#define CONFIG_SYS_64BIT_STRTOUL       1
-
 /*
  * I2C
  */
@@ -331,29 +327,39 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
  * General PCI
  * Addresses are mapped 1-1.
  */
-#define CONFIG_SYS_PCI1_MEM_BASE       0x80000000
+
+#define CONFIG_SYS_PCI1_MEM_VIRT       0x80000000
 #ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_PCI1_MEM_BUS                0xe0000000
 #define CONFIG_SYS_PCI1_MEM_PHYS       0x0000000c00000000ULL
 #else
-#define CONFIG_SYS_PCI1_MEM_PHYS       CONFIG_SYS_PCI1_MEM_BASE
+#define CONFIG_SYS_PCI1_MEM_BUS                CONFIG_SYS_PCI1_MEM_VIRT
+#define CONFIG_SYS_PCI1_MEM_PHYS       CONFIG_SYS_PCI1_MEM_VIRT
 #endif
 #define CONFIG_SYS_PCI1_MEM_SIZE       0x20000000      /* 512M */
-#define CONFIG_SYS_PCI1_IO_BASE        0x00000000
+#define CONFIG_SYS_PCI1_IO_BUS 0x00000000
 #define CONFIG_SYS_PCI1_IO_VIRT        0xffc00000
 #define CONFIG_SYS_PCI1_IO_PHYS        (CONFIG_SYS_PCI1_IO_VIRT \
                                 | CONFIG_SYS_PHYS_ADDR_HIGH)
 #define CONFIG_SYS_PCI1_IO_SIZE        0x00010000      /* 64K */
 
-/* For RTL8139 */
-#define KSEG1ADDR(x)           ({u32 _x=le32_to_cpu(*(u32 *)(x)); (&_x);})
-#define _IO_BASE               0x00000000
-
-#define CONFIG_SYS_PCI2_MEM_BASE       (CONFIG_SYS_PCI1_MEM_BASE \
+#ifdef CONFIG_PHYS_64BIT
+/*
+ * Use the same PCI bus address on PCI1 and PCI2 if we have PHYS_64BIT.
+ * This will increase the amount of PCI address space available for
+ * for mapping RAM.
+ */
+#define CONFIG_SYS_PCI2_MEM_BUS                CONFIG_SYS_PCI1_MEM_BUS
+#else
+#define CONFIG_SYS_PCI2_MEM_BUS                (CONFIG_SYS_PCI1_MEM_BUS \
+                                        + CONFIG_SYS_PCI1_MEM_SIZE)
+#endif
+#define CONFIG_SYS_PCI2_MEM_VIRT       (CONFIG_SYS_PCI1_MEM_VIRT \
                                         + CONFIG_SYS_PCI1_MEM_SIZE)
 #define CONFIG_SYS_PCI2_MEM_PHYS       (CONFIG_SYS_PCI1_MEM_PHYS \
                                         + CONFIG_SYS_PCI1_MEM_SIZE)
 #define CONFIG_SYS_PCI2_MEM_SIZE       0x20000000      /* 512M */
-#define CONFIG_SYS_PCI2_IO_BASE        0x00000000
+#define CONFIG_SYS_PCI2_IO_BUS 0x00000000
 #define CONFIG_SYS_PCI2_IO_VIRT (CONFIG_SYS_PCI1_IO_VIRT \
                                 + CONFIG_SYS_PCI1_IO_SIZE)
 #define CONFIG_SYS_PCI2_IO_PHYS        (CONFIG_SYS_PCI1_IO_PHYS \
@@ -380,7 +386,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_PCI_OHCI                        1
 #define CONFIG_USB_OHCI_NEW            1
 #define CONFIG_USB_KEYBOARD            1
-#define CONFIG_SYS_DEVICE_DEREGISTER
+#define CONFIG_SYS_STDIO_DEREGISTER
 #define CONFIG_SYS_USB_EVENT_POLL              1
 #define CONFIG_SYS_USB_OHCI_SLOT_NAME          "ohci_pci"
 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS     15
@@ -501,7 +507,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_SYS_DBAT2L      (BAT_PHYS_ADDR(CONFIG_SYS_PCI1_MEM_PHYS) \
                                 | BATL_PP_RW | BATL_CACHEINHIBIT \
                                 | BATL_GUARDEDSTORAGE)
-#define CONFIG_SYS_DBAT2U      (CONFIG_SYS_PCI1_MEM_BASE | BATU_BL_1G \
+#define CONFIG_SYS_DBAT2U      (CONFIG_SYS_PCI1_MEM_VIRT | BATU_BL_1G \
                                 | BATU_VS | BATU_VP)
 #define CONFIG_SYS_IBAT2L      (BAT_PHYS_ADDR(CONFIG_SYS_PCI1_MEM_PHYS) \
                                 | BATL_PP_RW | BATL_CACHEINHIBIT)
@@ -635,7 +641,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_CMD_REGINFO
 
 #if defined(CONFIG_SYS_RAMBOOT)
-    #undef CONFIG_CMD_ENV
+    #undef CONFIG_CMD_SAVEENV
 #endif
 
 #if defined(CONFIG_PCI)