Merge https://gitlab.denx.de/u-boot/custodians/u-boot-sh

[platform/kernel/u-boot.git] / include / configs / MPC8569MDS.h

diff --git a/include/configs/MPC8569MDS.h b/include/configs/MPC8569MDS.h
index 6cd7857..acb8dec 100644 (file)
--- a/include/configs/MPC8569MDS.h
+++ b/include/configs/MPC8569MDS.h
@@ -1,7 +1,6 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright 2009-2011 Freescale Semiconductor, Inc.
- *
- * SPDX-License-Identifier:    GPL-2.0+
  */
 
 /*
@@ -16,9 +15,7 @@
 #define CONFIG_PCIE1           1       /* PCIE controller */
 #define CONFIG_FSL_PCI_INIT    1       /* use common fsl pci init code */
 #define CONFIG_PCI_INDIRECT_BRIDGE 1   /* indirect PCI bridge support */
-#define CONFIG_FSL_PCIE_RESET  1       /* need PCIe reset errata */
 #define CONFIG_SYS_PCI_64BIT   1       /* enable 64-bit PCI resources */
-#define CONFIG_QE                      /* Enable QE */
 #define CONFIG_ENV_OVERWRITE
 
 #ifndef __ASSEMBLY__
@@ -50,9 +47,6 @@ extern unsigned long get_clock_freq(void);
 
 #define CONFIG_HWCONFIG
 
-#define CONFIG_SYS_MEMTEST_START       0x00200000      /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END         0x00400000
-
 /*
  * Config the L2 Cache as L2 SRAM
  */
@@ -69,7 +63,6 @@ extern unsigned long get_clock_freq(void);
 #endif
 
 /* DDR Setup */
-#undef CONFIG_FSL_DDR_INTERACTIVE
 #define CONFIG_SPD_EEPROM              /* Use SPD EEPROM for DDR setup*/
 #define CONFIG_DDR_SPD
 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER      /* DDR controller or DMA? */
@@ -116,8 +109,6 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_SYS_DDR_ERR_DIS          0x00000000
 #define CONFIG_SYS_DDR_SBE              0x00010000
 
-#undef CONFIG_CLOCKS_IN_MHZ
-
 /*
  * Local Bus Definitions
  */
@@ -152,8 +143,6 @@ extern unsigned long get_clock_freq(void);
 
 #undef CONFIG_SYS_RAMBOOT
 
-#define CONFIG_FLASH_CFI_DRIVER
-#define CONFIG_SYS_FLASH_CFI
 #define CONFIG_SYS_FLASH_EMPTY_INFO
 
 /* Chip select 3 - NAND */
@@ -405,8 +394,6 @@ extern unsigned long get_clock_freq(void);
 #endif /* CONFIG_QE */
 
 #if defined(CONFIG_PCI)
-#undef CONFIG_EEPRO100
-#undef CONFIG_TULIP
 
 #undef CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 
@@ -415,18 +402,11 @@ extern unsigned long get_clock_freq(void);
 /*
  * Environment
  */
-#if defined(CONFIG_SYS_RAMBOOT)
-#else
-#define CONFIG_ENV_ADDR                (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
-#define CONFIG_ENV_SECT_SIZE   0x20000 /* 128K(one sector) for env */
-#define CONFIG_ENV_SIZE                0x2000
-#endif
 
 #define CONFIG_LOADS_ECHO      1       /* echo on for serial download */
 #define CONFIG_SYS_LOADS_BAUD_CHANGE   1       /* allow baudrate change */
 
 /* QE microcode/firmware address */
-#define CONFIG_SYS_QE_FMAN_FW_IN_NOR
 #define CONFIG_SYS_QE_FW_ADDR  0xfff00000
 
 /*
@@ -437,7 +417,6 @@ extern unsigned long get_clock_freq(void);
 #undef CONFIG_WATCHDOG                 /* watchdog disabled */
 
 #ifdef CONFIG_MMC
-#define CONFIG_FSL_ESDHC
 #define CONFIG_FSL_ESDHC_PIN_MUX
 #define CONFIG_SYS_FSL_ESDHC_ADDR      CONFIG_SYS_MPC85xx_ESDHC_ADDR
 #endif
@@ -470,7 +449,7 @@ extern unsigned long get_clock_freq(void);
 /*
  * Environment Configuration
  */
-#define CONFIG_HOSTNAME mpc8569mds
+#define CONFIG_HOSTNAME "mpc8569mds"
 #define CONFIG_ROOTPATH  "/nfsroot"
 #define CONFIG_BOOTFILE  "your.uImage"