Merge branch 'master' of git://git.denx.de/u-boot-nand-flash

[platform/kernel/u-boot.git] / include / configs / MPC8568MDS.h

diff --git a/include/configs/MPC8568MDS.h b/include/configs/MPC8568MDS.h
index c4d4374..58ff52b 100644 (file)
--- a/include/configs/MPC8568MDS.h
+++ b/include/configs/MPC8568MDS.h
@@ -61,7 +61,6 @@ extern unsigned long get_clock_freq(void);
  */
 #define CONFIG_L2_CACHE                                /* toggle L2 cache      */
 #define CONFIG_BTB                             /* toggle branch predition */
-#define CONFIG_ADDR_STREAMING                  /* toggle addr streaming   */
 
 /*
  * Only possible on E500 Version 2 or newer cores.
@@ -92,7 +91,7 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_SPD_EEPROM              /* Use SPD EEPROM for DDR setup*/
 #define CONFIG_DDR_SPD
 #define CONFIG_DDR_DLL                 /* possible DLL fix needed */
-#undef CONFIG_ECC_INIT_VIA_DDRCONTROLLER       /* DDR controller or DMA? */
+#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER      /* DDR controller or DMA? */
 
 #define CONFIG_MEM_INIT_VALUE  0xDeadBeef
 
@@ -265,7 +264,6 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_SYS_BR5_PRELIM   0xf8010801
 #define CONFIG_SYS_OR5_PRELIM   0xffff69f7
 
-#define CONFIG_L1_INIT_RAM
 #define CONFIG_SYS_INIT_RAM_LOCK       1
 #define CONFIG_SYS_INIT_RAM_ADDR       0xe4010000      /* Initial RAM address */
 #define CONFIG_SYS_INIT_RAM_END        0x4000      /* End of used area in RAM */
@@ -324,21 +322,27 @@ extern unsigned long get_clock_freq(void);
  * General PCI
  * Memory Addresses are mapped 1-1. I/O is mapped from 0
  */
-#define CONFIG_SYS_PCI1_MEM_BASE       0x80000000
-#define CONFIG_SYS_PCI1_MEM_PHYS       CONFIG_SYS_PCI1_MEM_BASE
+#define CONFIG_SYS_PCI1_MEM_VIRT       0x80000000
+#define CONFIG_SYS_PCI1_MEM_BUS        0x80000000
+#define CONFIG_SYS_PCI1_MEM_PHYS       0x80000000
 #define CONFIG_SYS_PCI1_MEM_SIZE       0x20000000      /* 512M */
-#define CONFIG_SYS_PCI1_IO_BASE        0x00000000
+#define CONFIG_SYS_PCI1_IO_VIRT        0xe2000000
+#define CONFIG_SYS_PCI1_IO_BUS 0x00000000
 #define CONFIG_SYS_PCI1_IO_PHYS        0xe2000000
 #define CONFIG_SYS_PCI1_IO_SIZE        0x00800000      /* 8M */
 
-#define CONFIG_SYS_PCIE1_MEM_BASE      0xa0000000
-#define CONFIG_SYS_PCIE1_MEM_PHYS      CONFIG_SYS_PCIE1_MEM_BASE
+#define CONFIG_SYS_PCIE1_MEM_VIRT      0xa0000000
+#define CONFIG_SYS_PCIE1_MEM_BUS       0xa0000000
+#define CONFIG_SYS_PCIE1_MEM_PHYS      0xa0000000
 #define CONFIG_SYS_PCIE1_MEM_SIZE      0x20000000      /* 512M */
-#define CONFIG_SYS_PCIE1_IO_BASE       0x00000000
+#define CONFIG_SYS_PCIE1_IO_VIRT       0xe2800000
+#define CONFIG_SYS_PCIE1_IO_BUS        0x00000000
 #define CONFIG_SYS_PCIE1_IO_PHYS       0xe2800000
 #define CONFIG_SYS_PCIE1_IO_SIZE       0x00800000      /* 8M */
 
-#define CONFIG_SYS_SRIO_MEM_BASE       0xc0000000
+#define CONFIG_SYS_SRIO_MEM_VIRT       0xc0000000
+#define CONFIG_SYS_SRIO_MEM_BUS        0xc0000000
+#define CONFIG_SYS_SRIO_MEM_PHYS       0xc0000000
 
 #ifdef CONFIG_QE
 /*
@@ -389,11 +393,6 @@ extern unsigned long get_clock_freq(void);
 #undef CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 #define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1057  /* Motorola */
 
-/* PCI view of System Memory */
-#define CONFIG_SYS_PCI_MEMORY_BUS      0x00000000
-#define CONFIG_SYS_PCI_MEMORY_PHYS     0x00000000
-#define CONFIG_SYS_PCI_MEMORY_SIZE     0x80000000
-
 #endif /* CONFIG_PCI */
 
 #ifndef CONFIG_NET_MULTI