Merge commit 'wd/master'

[platform/kernel/u-boot.git] / include / configs / MPC8560ADS.h

diff --git a/include/configs/MPC8560ADS.h b/include/configs/MPC8560ADS.h
index cdd8ad4..9c95cc6 100644 (file)
--- a/include/configs/MPC8560ADS.h
+++ b/include/configs/MPC8560ADS.h
@@ -42,7 +42,7 @@
 #define CONFIG_MPC8560ADS      1       /* MPC8560ADS board specific */
 
 #define CONFIG_PCI
-#define CONFIG_TSEC_ENET               /* tsec ethernet support */
+#define CONFIG_TSEC_ENET               /* tsec ethernet support */
 #undef CONFIG_ETHER_ON_FCC             /* cpm FCC ethernet support */
 #define CONFIG_ENV_OVERWRITE
 #define CONFIG_SPD_EEPROM              /* Use SPD EEPROM for DDR setup*/
@@ -52,6 +52,7 @@
 #define CONFIG_DDR_ECC                 /* only for ECC DDR module */
 #define CONFIG_MEM_INIT_VALUE          0xDeadBeef
 
+#define CONFIG_FSL_LAW         1       /* Use common FSL init code */
 
 /*
  * sysclk for MPC85xx
@@ -92,8 +93,9 @@
  * Base addresses -- Note these are effective addresses where the
  * actual resources get mapped (not physical addresses)
  */
-#define CFG_CCSRBAR_DEFAULT    0xff700000      /* CCSRBAR Default */
+#define CFG_CCSRBAR_DEFAULT    0xff700000      /* CCSRBAR Default */
 #define CFG_CCSRBAR            0xe0000000      /* relocated CCSRBAR */
+#define CFG_CCSRBAR_PHYS       CFG_CCSRBAR     /* physical addr of CCSRBAR */
 #define CFG_IMMR               CFG_CCSRBAR     /* PQII uses CFG_IMMR */
 
 
@@ -140,7 +142,7 @@
 #define CFG_FLASH_ERASE_TOUT   60000   /* Flash Erase Timeout (ms) */
 #define CFG_FLASH_WRITE_TOUT   500     /* Flash Write Timeout (ms) */
 
-#define CFG_MONITOR_BASE       TEXT_BASE       /* start of monitor */
+#define CFG_MONITOR_BASE       TEXT_BASE       /* start of monitor */
 
 #if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
 #define CFG_RAMBOOT
@@ -261,23 +263,23 @@
 #define CFG_BCSR               (CFG_BR4_PRELIM & 0xffff8000)
 
 #define CONFIG_L1_INIT_RAM
-#define CFG_INIT_RAM_LOCK      1
+#define CFG_INIT_RAM_LOCK      1
 #define CFG_INIT_RAM_ADDR      0xe4010000      /* Initial RAM address */
-#define CFG_INIT_RAM_END       0x4000          /* End of used area in RAM */
+#define CFG_INIT_RAM_END       0x4000          /* End of used area in RAM */
 
-#define CFG_GBL_DATA_SIZE      128             /* num bytes initial data */
+#define CFG_GBL_DATA_SIZE      128             /* num bytes initial data */
 #define CFG_GBL_DATA_OFFSET    (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
 #define CFG_INIT_SP_OFFSET     CFG_GBL_DATA_OFFSET
 
-#define CFG_MONITOR_LEN                (256 * 1024)    /* Reserve 256 kB for Mon */
-#define CFG_MALLOC_LEN         (128 * 1024)    /* Reserved for malloc */
+#define CFG_MONITOR_LEN                (256 * 1024)    /* Reserve 256 kB for Mon */
+#define CFG_MALLOC_LEN         (128 * 1024)    /* Reserved for malloc */
 
 /* Serial Port */
 #define CONFIG_CONS_ON_SCC     /* define if console on SCC */
 #undef  CONFIG_CONS_NONE       /* define if console on something else */
 #define CONFIG_CONS_INDEX       1  /* which serial channel for console */
 
-#define CONFIG_BAUDRATE                115200
+#define CONFIG_BAUDRATE                115200
 
 #define CFG_BAUDRATE_TABLE  \
        {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
@@ -323,7 +325,7 @@
 #if defined(CONFIG_PCI)
 
 #define CONFIG_NET_MULTI
-#define CONFIG_PCI_PNP                 /* do pci plug-and-play */
+#define CONFIG_PCI_PNP                 /* do pci plug-and-play */
 
 #undef CONFIG_EEPRO100
 #undef CONFIG_TULIP
@@ -331,7 +333,7 @@
 #if !defined(CONFIG_PCI_PNP)
     #define PCI_ENET0_IOADDR   0xe0000000
     #define PCI_ENET0_MEMADDR  0xe0000000
-    #define PCI_IDSEL_NUMBER   0x0c    /* slot0->3(IDSEL)=12->15 */
+    #define PCI_IDSEL_NUMBER   0x0c    /* slot0->3(IDSEL)=12->15 */
 #endif
 
 #undef CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
@@ -343,7 +345,7 @@
 #ifdef CONFIG_TSEC_ENET
 
 #ifndef CONFIG_NET_MULTI
-#define CONFIG_NET_MULTI       1
+#define CONFIG_NET_MULTI       1
 #endif
 
 #ifndef CONFIG_MII
@@ -365,9 +367,9 @@
 
 #endif /* CONFIG_TSEC_ENET */
 
-#ifdef CONFIG_ETHER_ON_FCC     /* CPM FCC Ethernet */
+#ifdef CONFIG_ETHER_ON_FCC             /* CPM FCC Ethernet */
 
-#undef  CONFIG_ETHER_NONE      /* define if ether on something else */
+#undef  CONFIG_ETHER_NONE              /* define if ether on something else */
 #define CONFIG_ETHER_INDEX      2       /* which channel for ether */
 
 #if (CONFIG_ETHER_INDEX == 2)
@@ -385,7 +387,7 @@
 #elif (CONFIG_ETHER_INDEX == 3)
   /* need more definitions here for FE3 */
   #define FETH3_RST            0x80
-#endif                                 /* CONFIG_ETHER_INDEX */
+#endif                                 /* CONFIG_ETHER_INDEX */
 
 #ifndef CONFIG_MII
 #define CONFIG_MII             1       /* MII PHY management */
@@ -446,6 +448,7 @@
 
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_I2C
+#define CONFIG_CMD_ELF
 
 #if defined(CONFIG_PCI)
     #define CONFIG_CMD_PCI
@@ -489,13 +492,6 @@
  */
 #define CFG_BOOTMAPSZ  (8 << 20)       /* Initial Memory map for Linux*/
 
-/* Cache Configuration */
-#define CFG_DCACHE_SIZE                32768
-#define CFG_CACHELINE_SIZE     32
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT    5       /*log base 2 of the above value*/
-#endif
-
 /*
  * Internal Definitions
  *