Merge commit 'u-boot/master' into for-1.3.1

[platform/kernel/u-boot.git] / include / configs / MPC8555CDS.h

diff --git a/include/configs/MPC8555CDS.h b/include/configs/MPC8555CDS.h
index b94e38a..c414bf0 100644 (file)
--- a/include/configs/MPC8555CDS.h
+++ b/include/configs/MPC8555CDS.h
@@ -312,21 +312,23 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_OF_FLAT_TREE    1
 #define CONFIG_OF_BOARD_SETUP  1
 
-/* maximum size of the flat tree (8K) */
-#define OF_FLAT_TREE_MAX_SIZE  8192
-
 #define OF_CPU                 "PowerPC,8555@0"
 #define OF_SOC                 "soc8555@e0000000"
 #define OF_TBCLK               (bd->bi_busfreq / 8)
 #define OF_STDOUT_PATH         "/soc8555@e0000000/serial@4600"
+#define OF_PCI                 "pci@e0008000"
 
-/* I2C */
-#define CONFIG_HARD_I2C                        /* I2C with hardware support */
+/*
+ * I2C
+ */
+#define CONFIG_FSL_I2C         /* Use FSL common I2C driver */
+#define CONFIG_HARD_I2C                /* I2C with hardware support*/
 #undef CONFIG_SOFT_I2C                 /* I2C bit-banged */
 #define CFG_I2C_SPEED          400000  /* I2C speed and slave address */
 #define CFG_I2C_EEPROM_ADDR    0x57
 #define CFG_I2C_SLAVE          0x7F
 #define CFG_I2C_NOPROBES        {0x69} /* Don't probe these addrs */
+#define CFG_I2C_OFFSET         0x3000
 
 /*
  * General PCI
@@ -346,6 +348,13 @@ extern unsigned long get_clock_freq(void);
 #define CFG_PCI2_IO_PHYS       0xe2100000
 #define CFG_PCI2_IO_SIZE       0x00100000      /* 1M */
 
+#ifdef CONFIG_LEGACY
+#define BRIDGE_ID 17
+#define VIA_ID 2
+#else
+#define BRIDGE_ID 28
+#define VIA_ID 4
+#endif
 
 #if defined(CONFIG_PCI)
 
@@ -369,17 +378,16 @@ extern unsigned long get_clock_freq(void);
 #endif
 
 #define CONFIG_MII             1       /* MII PHY management */
-#define CONFIG_MPC85XX_TSEC1   1
-#define CONFIG_MPC85XX_TSEC1_NAME      "TSEC0"
-#define CONFIG_MPC85XX_TSEC2   1
-#define CONFIG_MPC85XX_TSEC2_NAME      "TSEC1"
-#undef CONFIG_MPC85XX_FEC
+#define CONFIG_TSEC1   1
+#define CONFIG_TSEC1_NAME      "TSEC0"
+#define CONFIG_TSEC2   1
+#define CONFIG_TSEC2_NAME      "TSEC1"
 #define TSEC1_PHY_ADDR         0
 #define TSEC2_PHY_ADDR         1
-#define FEC_PHY_ADDR           3
 #define TSEC1_PHYIDX           0
 #define TSEC2_PHYIDX           0
-#define FEC_PHYIDX             0
+#define TSEC1_FLAGS            TSEC_GIGABIT
+#define TSEC2_FLAGS            TSEC_GIGABIT
 
 /* Options are: TSEC[0-1] */
 #define CONFIG_ETHPRIME                "TSEC0"
@@ -397,19 +405,28 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_LOADS_ECHO      1       /* echo on for serial download */
 #define CFG_LOADS_BAUD_CHANGE  1       /* allow baudrate change */
 
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_MII
+
 #if defined(CONFIG_PCI)
-#define  CONFIG_COMMANDS       (CONFIG_CMD_DFL \
-                               | CFG_CMD_PCI \
-                               | CFG_CMD_PING \
-                               | CFG_CMD_I2C \
-                               | CFG_CMD_MII)
-#else
-#define  CONFIG_COMMANDS       (CONFIG_CMD_DFL \
-                               | CFG_CMD_PING \
-                               | CFG_CMD_I2C \
-                               | CFG_CMD_MII)
+    #define CONFIG_CMD_PCI
 #endif
-#include <cmd_confdefs.h>
+
 
 #undef CONFIG_WATCHDOG                 /* watchdog disabled */
 
@@ -419,7 +436,7 @@ extern unsigned long get_clock_freq(void);
 #define CFG_LONGHELP                   /* undef to save memory */
 #define CFG_LOAD_ADDR  0x2000000       /* default load address */
 #define CFG_PROMPT     "=> "           /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CBSIZE     1024            /* Console I/O Buffer Size */
 #else
 #define CFG_CBSIZE     256             /* Console I/O Buffer Size */
@@ -439,7 +456,7 @@ extern unsigned long get_clock_freq(void);
 /* Cache Configuration */
 #define CFG_DCACHE_SIZE        32768
 #define CFG_CACHELINE_SIZE     32
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CACHELINE_SHIFT    5       /*log base 2 of the above value*/
 #endif
 
@@ -451,7 +468,7 @@ extern unsigned long get_clock_freq(void);
 #define BOOTFLAG_COLD  0x01            /* Normal Power-On: Boot from FLASH */
 #define BOOTFLAG_WARM  0x02            /* Software reboot */
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   230400  /* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX  2       /* which serial port to use */
 #endif
@@ -462,6 +479,7 @@ extern unsigned long get_clock_freq(void);
 
 /* The mac addresses for all ethernet interface */
 #if defined(CONFIG_TSEC_ENET)
+#define CONFIG_HAS_ETH0
 #define CONFIG_ETHADDR   00:E0:0C:00:00:FD
 #define CONFIG_HAS_ETH1
 #define CONFIG_ETH1ADDR  00:E0:0C:00:01:FD
@@ -489,8 +507,10 @@ extern unsigned long get_clock_freq(void);
 #define        CONFIG_EXTRA_ENV_SETTINGS                                       \
    "netdev=eth0\0"                                                      \
    "consoledev=ttyS1\0"                                                 \
-   "ramdiskaddr=400000\0"                                               \
-   "ramdiskfile=your.ramdisk.u-boot\0"
+   "ramdiskaddr=600000\0"                                               \
+   "ramdiskfile=your.ramdisk.u-boot\0"                                 \
+   "fdtaddr=400000\0"                                                  \
+   "fdtfile=your.fdt.dtb\0"
 
 #define CONFIG_NFSBOOTCOMMAND                                          \
    "setenv bootargs root=/dev/nfs rw "                                  \
@@ -498,7 +518,8 @@ extern unsigned long get_clock_freq(void);
       "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
       "console=$consoledev,$baudrate $othbootargs;"                     \
    "tftp $loadaddr $bootfile;"                                          \
-   "bootm $loadaddr"
+   "tftp $fdtaddr $fdtfile;"                                           \
+   "bootm $loadaddr - $fdtaddr"
 
 #define CONFIG_RAMBOOTCOMMAND \
    "setenv bootargs root=/dev/ram rw "                                  \