powerpc/p4080ds: Move ICS refclk define into P4080DS.h

[platform/kernel/u-boot.git] / include / configs / MPC8548CDS.h

diff --git a/include/configs/MPC8548CDS.h b/include/configs/MPC8548CDS.h
index 33f49f5..b221a5c 100644 (file)
--- a/include/configs/MPC8548CDS.h
+++ b/include/configs/MPC8548CDS.h
@@ -36,6 +36,10 @@
 #define CONFIG_MPC8548         1       /* MPC8548 specific */
 #define CONFIG_MPC8548CDS      1       /* MPC8548CDS board specific */
 
+#ifndef CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_TEXT_BASE   0xfff80000
+#endif
+
 #define CONFIG_PCI             /* enable any pci type devices */
 #define CONFIG_PCI1            /* PCI controller 1 */
 #define CONFIG_PCIE1           /* PCIE controler 1 (slot 1) */
@@ -157,7 +161,7 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_SYS_FLASH_ERASE_TOUT    60000   /* Flash Erase Timeout (ms) */
 #define CONFIG_SYS_FLASH_WRITE_TOUT    500     /* Flash Write Timeout (ms) */
 
-#define CONFIG_SYS_MONITOR_BASE        TEXT_BASE       /* start of monitor */
+#define CONFIG_SYS_MONITOR_BASE        CONFIG_SYS_TEXT_BASE    /* start of monitor */
 
 #define CONFIG_FLASH_CFI_DRIVER
 #define CONFIG_SYS_FLASH_CFI
@@ -269,12 +273,11 @@ extern unsigned long get_clock_freq(void);
 
 #define CONFIG_SYS_INIT_RAM_LOCK       1
 #define CONFIG_SYS_INIT_RAM_ADDR       0xe4010000      /* Initial RAM address */
-#define CONFIG_SYS_INIT_RAM_END        0x4000          /* End of used area in RAM */
+#define CONFIG_SYS_INIT_RAM_SIZE       0x4000          /* Size of used area in RAM */
 
 #define CONFIG_SYS_INIT_L2_ADDR        0xf8f80000      /* relocate boot L2SRAM */
 
-#define CONFIG_SYS_GBL_DATA_SIZE       128             /* num bytes initial data */
-#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET      CONFIG_SYS_GBL_DATA_OFFSET
 
 #define CONFIG_SYS_MONITOR_LEN         (256 * 1024) /* Reserve 256 kB for Mon */
@@ -282,7 +285,6 @@ extern unsigned long get_clock_freq(void);
 
 /* Serial Port */
 #define CONFIG_CONS_INDEX      2
-#undef CONFIG_SERIAL_SOFTWARE_FIFO
 #define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE    1
@@ -492,14 +494,6 @@ extern unsigned long get_clock_freq(void);
  */
 #define CONFIG_SYS_BOOTMAPSZ   (16 << 20)      /* Initial Memory map for Linux*/
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01            /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM  0x02            /* Software reboot */
-
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   230400  /* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX  2       /* which serial port to use */
@@ -543,11 +537,11 @@ extern unsigned long get_clock_freq(void);
  "netdev=eth0\0"                                               \
  "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0"                                \
  "tftpflash=tftpboot $loadaddr $uboot; "                       \
-       "protect off " MK_STR(TEXT_BASE) " +$filesize; "        \
-       "erase " MK_STR(TEXT_BASE) " +$filesize; "              \
-       "cp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize; "      \
-       "protect on " MK_STR(TEXT_BASE) " +$filesize; "         \
-       "cmp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize\0"     \
+       "protect off " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; "     \
+       "erase " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; "           \
+       "cp.b $loadaddr " MK_STR(CONFIG_SYS_TEXT_BASE) " $filesize; "   \
+       "protect on " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; "              \
+       "cmp.b $loadaddr " MK_STR(CONFIG_SYS_TEXT_BASE) " $filesize\0"  \
  "consoledev=ttyS1\0"                          \
  "ramdiskaddr=2000000\0"                       \
  "ramdiskfile=ramdisk.uboot\0"                 \