configs: Migrate CONFIG_SYS_MAX_FLASH_BANKS to Kconfig

[platform/kernel/u-boot.git] / include / configs / MPC8540ADS.h

diff --git a/include/configs/MPC8540ADS.h b/include/configs/MPC8540ADS.h
index 8b7e0da..57097b1 100644 (file)
--- a/include/configs/MPC8540ADS.h
+++ b/include/configs/MPC8540ADS.h
@@ -26,10 +26,6 @@
 #define CONFIG_HAS_FEC         1       /* 8540 has FEC */
 #endif
 
-#define CONFIG_PCI_INDIRECT_BRIDGE
-#define CONFIG_SYS_PCI_64BIT   1       /* enable 64-bit PCI resources */
-#define CONFIG_ENV_OVERWRITE
-
 /*
  * sysclk for MPC85xx
  *
@@ -48,10 +44,6 @@
  * Note that PCI-X won't work at 33MHz.
  */
 
-#ifndef CONFIG_SYS_CLK_FREQ
-#define CONFIG_SYS_CLK_FREQ    33000000
-#endif
-
 /*
  * These can be toggled for performance analysis, otherwise use default.
  */
@@ -63,7 +55,6 @@
 
 /* DDR Setup */
 #define CONFIG_SPD_EEPROM              /* Use SPD EEPROM for DDR setup*/
-#define CONFIG_DDR_SPD
 
 #define CONFIG_MEM_INIT_VALUE          0xDeadBeef
 
@@ -93,10 +84,7 @@
 #define CONFIG_SYS_LBC_SDRAM_SIZE      64              /* LBC SDRAM is 64MB */
 
 #define CONFIG_SYS_FLASH_BASE          0xff000000      /* start of FLASH 16M */
-#define CONFIG_SYS_BR0_PRELIM          0xff001801      /* port size 32bit */
 
-#define CONFIG_SYS_OR0_PRELIM          0xff006ff7      /* 16MB Flash */
-#define CONFIG_SYS_MAX_FLASH_BANKS     1               /* number of banks */
 #define CONFIG_SYS_MAX_FLASH_SECT      64              /* sectors per device */
 #undef CONFIG_SYS_FLASH_CHECKSUM
 #define CONFIG_SYS_FLASH_ERASE_TOUT    60000   /* Flash Erase Timeout (ms) */
@@ -134,8 +122,6 @@
  * FIXME: the top 17 bits of BR2.
  */
 
-#define CONFIG_SYS_BR2_PRELIM          0xf0001861
-
 /*
  * The SDRAM size in MB, CONFIG_SYS_LBC_SDRAM_SIZE, is 64.
  *
@@ -150,8 +136,6 @@
  * 1111 1100 0000 0000 0110 1001 0000 0001 = fc006901
  */
 
-#define CONFIG_SYS_OR2_PRELIM          0xfc006901
-
 #define CONFIG_SYS_LBC_LCRR            0x00030004    /* LB clock ratio reg */
 #define CONFIG_SYS_LBC_LBCR            0x00000000    /* LB config reg */
 #define CONFIG_SYS_LBC_LSRT            0x20000000    /* LB sdram refresh timer */
@@ -179,8 +163,6 @@
 /*
  * 32KB, 8-bit wide for ADS config reg
  */
-#define CONFIG_SYS_BR4_PRELIM          0xf8000801
-#define CONFIG_SYS_OR4_PRELIM          0xffffe1f1
 #define CONFIG_SYS_BCSR                (CONFIG_SYS_BR4_PRELIM & 0xffff8000)
 
 #define CONFIG_SYS_INIT_RAM_LOCK       1
@@ -191,7 +173,6 @@
 #define CONFIG_SYS_INIT_SP_OFFSET      CONFIG_SYS_GBL_DATA_OFFSET
 
 #define CONFIG_SYS_MONITOR_LEN         (256 * 1024)    /* Reserve 256 kB for Mon */
-#define CONFIG_SYS_MALLOC_LEN          (128 * 1024)    /* Reserved for malloc */
 
 /* Serial Port */
 #define CONFIG_SYS_NS16550_SERIAL
@@ -207,11 +188,6 @@
 /*
  * I2C
  */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_FSL
-#define CONFIG_SYS_FSL_I2C_SPEED       400000
-#define CONFIG_SYS_FSL_I2C_SLAVE       0x7F
-#define CONFIG_SYS_FSL_I2C_OFFSET      0x3000
 #define CONFIG_SYS_I2C_NOPROBES                { {0, 0x69} }
 
 /* RapidIO MMU */
@@ -242,7 +218,6 @@
 #endif
 
 #undef CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
-#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1057  /* Motorola */
 
 #endif /* CONFIG_PCI */
 
@@ -284,12 +259,9 @@
  */
 #define CONFIG_BOOTP_BOOTFILESIZE
 
-#undef CONFIG_WATCHDOG                 /* watchdog disabled */
-
 /*
  * Miscellaneous configurable options
  */
-#define CONFIG_SYS_LOAD_ADDR   0x2000000       /* default load address */
 
 /*
  * For booting Linux, the board info and command line data
@@ -299,10 +271,6 @@
 #define CONFIG_SYS_BOOTMAPSZ   (64 << 20)      /* Initial Memory map for Linux*/
 #define CONFIG_SYS_BOOTM_LEN   (64 << 20)      /* Increase max gunzip size */
 
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE   230400  /* speed to run kgdb serial port */
-#endif
-
 /*
  * Environment Configuration
  */
@@ -324,8 +292,6 @@
 #define CONFIG_GATEWAYIP 192.168.1.1
 #define CONFIG_NETMASK   255.255.255.0
 
-#define CONFIG_LOADADDR  200000        /* default location for tftp and bootm */
-
 #define        CONFIG_EXTRA_ENV_SETTINGS                                       \
    "netdev=eth0\0"                                                      \
    "consoledev=ttyS0\0"                                                 \
@@ -334,23 +300,4 @@
    "fdtaddr=400000\0"                                                  \
    "fdtfile=your.fdt.dtb\0"
 
-#define CONFIG_NFSBOOTCOMMAND                                          \
-   "setenv bootargs root=/dev/nfs rw "                                  \
-      "nfsroot=$serverip:$rootpath "                                    \
-      "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
-      "console=$consoledev,$baudrate $othbootargs;"                     \
-   "tftp $loadaddr $bootfile;"                                          \
-   "tftp $fdtaddr $fdtfile;"                                           \
-   "bootm $loadaddr - $fdtaddr"
-
-#define CONFIG_RAMBOOTCOMMAND \
-   "setenv bootargs root=/dev/ram rw "                                  \
-      "console=$consoledev,$baudrate $othbootargs;"                     \
-   "tftp $ramdiskaddr $ramdiskfile;"                                    \
-   "tftp $loadaddr $bootfile;"                                          \
-   "tftp $fdtaddr $fdtfile;"                                           \
-   "bootm $loadaddr $ramdiskaddr $fdtaddr"
-
-#define CONFIG_BOOTCOMMAND  CONFIG_NFSBOOTCOMMAND
-
 #endif /* __CONFIG_H */