powerpc: Cleanup BOOTFLAG_* references

[platform/kernel/u-boot.git] / include / configs / MPC837XEMDS.h

diff --git a/include/configs/MPC837XEMDS.h b/include/configs/MPC837XEMDS.h
index 28d442b..fa0da48 100644 (file)
--- a/include/configs/MPC837XEMDS.h
+++ b/include/configs/MPC837XEMDS.h
@@ -25,10 +25,12 @@
  * High Level Configuration Options
  */
 #define CONFIG_E300            1 /* E300 family */
-#define CONFIG_MPC83XX         1 /* MPC83XX family */
-#define CONFIG_MPC837X         1 /* MPC837X CPU specific */
+#define CONFIG_MPC83xx         1 /* MPC83xx family */
+#define CONFIG_MPC837x         1 /* MPC837x CPU specific */
 #define CONFIG_MPC837XEMDS     1 /* MPC837XEMDS board specific */
 
+#define        CONFIG_SYS_TEXT_BASE    0xFE000000
+
 /*
  * System Clock Setup
  */
@@ -111,6 +113,7 @@
 
 #define CONFIG_BOARD_EARLY_INIT_F /* call board_pre_init */
 #define CONFIG_BOARD_EARLY_INIT_R
+#define CONFIG_HWCONFIG
 
 /*
  * IMMR new address
@@ -195,7 +198,7 @@
 /*
  * The reserved memory
  */
-#define CONFIG_SYS_MONITOR_BASE        TEXT_BASE /* start of monitor */
+#define CONFIG_SYS_MONITOR_BASE        CONFIG_SYS_TEXT_BASE /* start of monitor */
 
 #if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
 #define CONFIG_SYS_RAMBOOT
@@ -219,8 +222,10 @@
 /*
  * Local Bus Configuration & Clock Setup
  */
-#define CONFIG_SYS_LCRR                (LCRR_DBYP | LCRR_CLKDIV_8)
+#define CONFIG_SYS_LCRR_DBYP   LCRR_DBYP
+#define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_8
 #define CONFIG_SYS_LBC_LBCR            0x00000000
+#define CONFIG_FSL_ELBC                1
 
 /*
  * FLASH on the Local Bus
@@ -271,7 +276,6 @@
 #define CONFIG_CMD_NAND                1
 #define CONFIG_MTD_NAND_VERIFY_WRITE   1
 #define CONFIG_SYS_MAX_NAND_DEVICE     1
-#define NAND_MAX_CHIPS         1
 #define CONFIG_NAND_FSL_ELBC   1
 
 #define CONFIG_SYS_NAND_BASE           0xE0600000      /* 0xE0600000 */
@@ -297,7 +301,6 @@
  * Serial Port
  */
 #define CONFIG_CONS_INDEX      1
-#undef CONFIG_SERIAL_SOFTWARE_FIFO
 #define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE    1
@@ -378,8 +381,7 @@
 #ifndef __ASSEMBLY__
 extern int board_pci_host_broken(void);
 #endif
-#define CONFIG_83XX_GENERIC_PCI        1 /* Use generic PCI setup */
-#define CONFIG_83XX_GENERIC_PCIE       1
+#define CONFIG_PCIE
 #define CONFIG_PQ_MDS_PIB      1 /* PQ MDS Platform IO Board */
 
 #define CONFIG_HAS_FSL_DR_USB  1 /* fixup device tree for the DR USB */
@@ -495,14 +497,27 @@ extern int board_pci_host_broken(void);
 #endif
 
 #if defined(CONFIG_SYS_RAMBOOT)
-    #undef CONFIG_CMD_ENV
+    #undef CONFIG_CMD_SAVEENV
     #undef CONFIG_CMD_LOADS
 #endif
 
 #define CONFIG_CMDLINE_EDITING 1       /* add command line history */
+#define CONFIG_AUTO_COMPLETE           /* add autocompletion support   */
 
 #undef CONFIG_WATCHDOG         /* watchdog disabled */
 
+#define CONFIG_MMC     1
+
+#ifdef CONFIG_MMC
+#define CONFIG_FSL_ESDHC
+#define CONFIG_SYS_FSL_ESDHC_ADDR      CONFIG_SYS_MPC83xx_ESDHC_ADDR
+#define CONFIG_CMD_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
+#define CONFIG_DOS_PARTITION
+#endif
+
 /*
  * Miscellaneous configurable options
  */
@@ -523,16 +538,17 @@ extern int board_pci_host_broken(void);
 
 /*
  * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
+ * have to be in the first 256 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CONFIG_SYS_BOOTMAPSZ           (8 << 20) /* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ           (256 << 20) /* Initial Memory map for Linux */
 
 /*
  * Core HID Setup
  */
-#define CONFIG_SYS_HID0_INIT           0x000000000
-#define CONFIG_SYS_HID0_FINAL          HID0_ENABLE_MACHINE_CHECK
+#define CONFIG_SYS_HID0_INIT   0x000000000
+#define CONFIG_SYS_HID0_FINAL  (HID0_ENABLE_MACHINE_CHECK | \
+                                HID0_ENABLE_INSTRUCTION_CACHE)
 #define CONFIG_SYS_HID2                HID2_HBE
 
 /*
@@ -604,14 +620,6 @@ extern int board_pci_host_broken(void);
 #define CONFIG_SYS_DBAT7U      CONFIG_SYS_IBAT7U
 #endif
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01 /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM  0x02 /* Software reboot */
-
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   230400  /* speed of kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX  2       /* which serial port to use */
@@ -625,14 +633,12 @@ extern int board_pci_host_broken(void);
 
 #if defined(CONFIG_TSEC_ENET)
 #define CONFIG_HAS_ETH0
-#define CONFIG_ETHADDR         00:E0:0C:00:83:79
 #define CONFIG_HAS_ETH1
-#define CONFIG_ETH1ADDR                00:E0:0C:00:83:78
 #endif
 
 #define CONFIG_BAUDRATE 115200
 
-#define CONFIG_LOADADDR 500000 /* default location for tftp and bootm */
+#define CONFIG_LOADADDR 800000 /* default location for tftp and bootm */
 
 #define CONFIG_BOOTDELAY 6     /* -1 disables auto-boot */
 #undef CONFIG_BOOTARGS         /* the boot command will set bootargs */
@@ -642,7 +648,7 @@ extern int board_pci_host_broken(void);
    "consoledev=ttyS0\0"                                                        \
    "ramdiskaddr=1000000\0"                                             \
    "ramdiskfile=ramfs.83xx\0"                                          \
-   "fdtaddr=400000\0"                                                  \
+   "fdtaddr=780000\0"                                                  \
    "fdtfile=mpc8379_mds.dtb\0"                                         \
    ""