configs: migrate CONFIG_VIDEO_BMP_RLE8 to defconfigs

[platform/kernel/u-boot.git] / include / configs / MPC837XEMDS.h

diff --git a/include/configs/MPC837XEMDS.h b/include/configs/MPC837XEMDS.h
index 7361f0e..c42cb42 100644 (file)
--- a/include/configs/MPC837XEMDS.h
+++ b/include/configs/MPC837XEMDS.h
@@ -12,13 +12,6 @@
  */
 #define CONFIG_E300            1 /* E300 family */
 
-/* Arbiter Configuration Register */
-#define CONFIG_SYS_ACR_PIPE_DEP        3       /* Arbiter pipeline depth is 4 */
-#define CONFIG_SYS_ACR_RPTCNT  3       /* Arbiter repeat count is 4 */
-
-/* System Priority Control Register */
-#define CONFIG_SYS_SPCR_TSECEP 3 /* eTSEC1/2 emergency has highest priority */
-
 /*
  * IP blocks clock configuration
  */
@@ -40,16 +33,9 @@
 #define CONFIG_HWCONFIG
 
 /*
- * IMMR new address
- */
-#define CONFIG_SYS_IMMR                0xE0000000
-
-/*
  * DDR Setup
  */
-#define CONFIG_SYS_DDR_BASE            0x00000000 /* DDR is system memory */
-#define CONFIG_SYS_SDRAM_BASE          CONFIG_SYS_DDR_BASE
-#define CONFIG_SYS_DDR_SDRAM_BASE      CONFIG_SYS_DDR_BASE
+#define CONFIG_SYS_SDRAM_BASE          0x00000000 /* DDR is system memory */
 #define CONFIG_SYS_DDR_SDRAM_CLK_CNTL  DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05
 #define CONFIG_SYS_83XX_DDR_USES_CS0
 #define CONFIG_SYS_DDRCDR_VALUE                (DDRCDR_DHC_EN \
@@ -121,8 +107,6 @@
  * Memory test
  */
 #undef CONFIG_SYS_DRAM_TEST            /* memory test, takes time */
-#define CONFIG_SYS_MEMTEST_START       0x00040000 /* memtest region */
-#define CONFIG_SYS_MEMTEST_END         0x00140000
 
 /*
  * The reserved memory
@@ -149,14 +133,6 @@
                        (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 
 /*
- * Local Bus Configuration & Clock Setup
- */
-#define CONFIG_SYS_LCRR_DBYP   LCRR_DBYP
-#define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_8
-#define CONFIG_SYS_LBC_LBCR            0x00000000
-#define CONFIG_FSL_ELBC                1
-
-/*
  * FLASH on the Local Bus
  */
 #define CONFIG_SYS_FLASH_BASE  0xFE000000 /* FLASH base address */
@@ -262,7 +238,6 @@ extern int board_pci_host_broken(void);
 #define CONFIG_USB_EHCI_FSL
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 
-#undef CONFIG_EEPRO100
 #undef CONFIG_PCI_SCAN_SHOW    /* show pci devices on startup */
 #define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1957  /* Freescale */
 #endif /* CONFIG_PCI */
@@ -319,15 +294,6 @@ extern int board_pci_host_broken(void);
 /*
  * Environment
  */
-#ifndef CONFIG_SYS_RAMBOOT
-       #define CONFIG_ENV_ADDR         \
-                       (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
-       #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K(one sector) for env */
-       #define CONFIG_ENV_SIZE         0x2000
-#else
-       #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - 0x1000)
-       #define CONFIG_ENV_SIZE         0x2000
-#endif
 
 #define CONFIG_LOADS_ECHO      1       /* echo on for serial download */
 #define CONFIG_SYS_LOADS_BAUD_CHANGE   1       /* allow baudrate change */
@@ -337,10 +303,6 @@ extern int board_pci_host_broken(void);
  */
 #define CONFIG_BOOTP_BOOTFILESIZE
 
-/*
- * Command line configuration.
- */
-
 #undef CONFIG_WATCHDOG         /* watchdog disabled */
 
 #ifdef CONFIG_MMC
@@ -369,8 +331,6 @@ extern int board_pci_host_broken(void);
  * Environment Configuration
  */
 
-#define CONFIG_ENV_OVERWRITE
-
 #if defined(CONFIG_TSEC_ENET)
 #define CONFIG_HAS_ETH0
 #define CONFIG_HAS_ETH1