disk: convert CONFIG_DOS_PARTITION to Kconfig

[platform/kernel/u-boot.git] / include / configs / MPC837XEMDS.h

diff --git a/include/configs/MPC837XEMDS.h b/include/configs/MPC837XEMDS.h
index df47888..62d56ca 100644 (file)
--- a/include/configs/MPC837XEMDS.h
+++ b/include/configs/MPC837XEMDS.h
@@ -8,8 +8,6 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#define CONFIG_DISPLAY_BOARDINFO
-
 /*
  * High Level Configuration Options
  */
@@ -99,7 +97,6 @@
  */
 #define CONFIG_SYS_OBIR                0x31100000
 
-#define CONFIG_BOARD_EARLY_INIT_F /* call board_pre_init */
 #define CONFIG_BOARD_EARLY_INIT_R
 #define CONFIG_HWCONFIG
 
@@ -200,7 +197,7 @@
 #endif
 
 /* CONFIG_SYS_MONITOR_LEN must be a multiple of CONFIG_ENV_SECT_SIZE */
-#define CONFIG_SYS_MONITOR_LEN (384 * 1024) /* Reserve 384 kB for Mon */
+#define CONFIG_SYS_MONITOR_LEN (512 * 1024) /* Reserve 512 kB for Mon */
 #define CONFIG_SYS_MALLOC_LEN  (512 * 1024) /* Reserved for malloc */
 
 /*
@@ -318,14 +315,6 @@
 #define CONFIG_SYS_NS16550_COM1        (CONFIG_SYS_IMMR+0x4500)
 #define CONFIG_SYS_NS16550_COM2        (CONFIG_SYS_IMMR+0x4600)
 
-/* Use the HUSH parser */
-#define CONFIG_SYS_HUSH_PARSER
-
-/* Pass open firmware flat tree */
-#define CONFIG_OF_LIBFDT       1
-#define CONFIG_OF_BOARD_SETUP  1
-#define CONFIG_OF_STDOUT_VIA_ALIAS     1
-
 /* I2C */
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_FSL
@@ -387,14 +376,10 @@ extern int board_pci_host_broken(void);
 #define CONFIG_PQ_MDS_PIB      1 /* PQ MDS Platform IO Board */
 
 #define CONFIG_HAS_FSL_DR_USB  1 /* fixup device tree for the DR USB */
-#define CONFIG_CMD_USB
-#define CONFIG_USB_STORAGE
 #define CONFIG_USB_EHCI
 #define CONFIG_USB_EHCI_FSL
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 
-#define CONFIG_PCI_PNP         /* do pci plug-and-play */
-
 #undef CONFIG_EEPRO100
 #undef CONFIG_PCI_SCAN_SHOW    /* show pci devices on startup */
 #define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1957  /* Freescale */
@@ -453,8 +438,6 @@ extern int board_pci_host_broken(void);
 #ifdef CONFIG_FSL_SATA
 #define CONFIG_LBA48
 #define CONFIG_CMD_SATA
-#define CONFIG_DOS_PARTITION
-#define CONFIG_CMD_EXT2
 #endif
 
 /*
@@ -484,13 +467,9 @@ extern int board_pci_host_broken(void);
 #define CONFIG_BOOTP_GATEWAY
 #define CONFIG_BOOTP_HOSTNAME
 
-
 /*
  * Command line configuration.
  */
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_MII
 #define CONFIG_CMD_DATE
 
 #if defined(CONFIG_PCI)
@@ -502,17 +481,11 @@ extern int board_pci_host_broken(void);
 
 #undef CONFIG_WATCHDOG         /* watchdog disabled */
 
-#define CONFIG_MMC     1
-
 #ifdef CONFIG_MMC
 #define CONFIG_FSL_ESDHC
 #define CONFIG_FSL_ESDHC_PIN_MUX
 #define CONFIG_SYS_FSL_ESDHC_ADDR      CONFIG_SYS_MPC83xx_ESDHC_ADDR
-#define CONFIG_CMD_MMC
 #define CONFIG_GENERIC_MMC
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_FAT
-#define CONFIG_DOS_PARTITION
 #endif
 
 /*
@@ -539,6 +512,7 @@ extern int board_pci_host_broken(void);
  * the maximum mapped by the Linux kernel during initialization.
  */
 #define CONFIG_SYS_BOOTMAPSZ   (256 << 20) /* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTM_LEN   (64 << 20)      /* Increase max gunzip size */
 
 /*
  * Core HID Setup
@@ -676,7 +650,6 @@ extern int board_pci_host_broken(void);
 
 #define CONFIG_LOADADDR 800000 /* default location for tftp and bootm */
 
-#define CONFIG_BOOTDELAY 6     /* -1 disables auto-boot */
 #undef CONFIG_BOOTARGS         /* the boot command will set bootargs */
 
 #define CONFIG_EXTRA_ENV_SETTINGS                                      \
@@ -706,7 +679,6 @@ extern int board_pci_host_broken(void);
        "tftp $fdtaddr $fdtfile;"                                       \
        "bootm $loadaddr $ramdiskaddr $fdtaddr"
 
-
 #define CONFIG_BOOTCOMMAND CONFIG_NFSBOOTCOMMAND
 
 #endif /* __CONFIG_H */