MPC837XEMDS: Remove CONFIG_MPC837XEMDS

[platform/kernel/u-boot.git] / include / configs / MPC837XEMDS.h

diff --git a/include/configs/MPC837XEMDS.h b/include/configs/MPC837XEMDS.h
index 182f558..577f7ec 100644 (file)
--- a/include/configs/MPC837XEMDS.h
+++ b/include/configs/MPC837XEMDS.h
@@ -1,8 +1,7 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright (C) 2007 Freescale Semiconductor, Inc.
  * Dave Liu <daveliu@freescale.com>
- *
- * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -12,8 +11,6 @@
  * High Level Configuration Options
  */
 #define CONFIG_E300            1 /* E300 family */
-#define CONFIG_MPC837x         1 /* MPC837x CPU specific */
-#define CONFIG_MPC837XEMDS     1 /* MPC837XEMDS board specific */
 
 /*
  * System Clock Setup
@@ -95,7 +92,6 @@
  */
 #define CONFIG_SYS_OBIR                0x31100000
 
-#define CONFIG_BOARD_EARLY_INIT_R
 #define CONFIG_HWCONFIG
 
 /*
@@ -218,11 +214,8 @@
 /*
  * FLASH on the Local Bus
  */
-#define CONFIG_SYS_FLASH_CFI   /* use the Common Flash Interface */
-#define CONFIG_FLASH_CFI_DRIVER        /* use the CFI driver */
 #define CONFIG_SYS_FLASH_BASE  0xFE000000 /* FLASH base address */
 #define CONFIG_SYS_FLASH_SIZE  32 /* max FLASH size is 32M */
-#define CONFIG_SYS_FLASH_PROTECTION    1       /* Use h/w Flash protection. */
 
                                        /* Window base at flash base */
 #define CONFIG_SYS_LBLAWBAR0_PRELIM    CONFIG_SYS_FLASH_BASE
@@ -301,7 +294,6 @@
 /*
  * Serial Port
  */
-#define CONFIG_CONS_INDEX      1
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE    1
 #define CONFIG_SYS_NS16550_CLK         get_bus_freq(0)
@@ -384,7 +376,6 @@ extern int board_pci_host_broken(void);
 /*
  * TSEC
  */
-#define CONFIG_TSEC_ENET       /* TSEC ethernet support */
 #define CONFIG_SYS_TSEC1_OFFSET        0x24000
 #define CONFIG_SYS_TSEC1       (CONFIG_SYS_IMMR+CONFIG_SYS_TSEC1_OFFSET)
 #define CONFIG_SYS_TSEC2_OFFSET        0x25000
@@ -393,7 +384,6 @@ extern int board_pci_host_broken(void);
 /*
  * TSEC ethernet configuration
  */
-#define CONFIG_MII             1 /* MII PHY management */
 #define CONFIG_TSEC1           1
 #define CONFIG_TSEC1_NAME      "eTSEC0"
 #define CONFIG_TSEC2           1
@@ -460,7 +450,6 @@ extern int board_pci_host_broken(void);
 #undef CONFIG_WATCHDOG         /* watchdog disabled */
 
 #ifdef CONFIG_MMC
-#define CONFIG_FSL_ESDHC
 #define CONFIG_FSL_ESDHC_PIN_MUX
 #define CONFIG_SYS_FSL_ESDHC_ADDR      CONFIG_SYS_MPC83xx_ESDHC_ADDR
 #endif