sunxi: usb: Switch to Generic host controllers

[platform/kernel/u-boot.git] / include / configs / MPC837XEMDS.h

diff --git a/include/configs/MPC837XEMDS.h b/include/configs/MPC837XEMDS.h
index 1a65c25..50f6df5 100644 (file)
--- a/include/configs/MPC837XEMDS.h
+++ b/include/configs/MPC837XEMDS.h
@@ -1,8 +1,7 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright (C) 2007 Freescale Semiconductor, Inc.
  * Dave Liu <daveliu@freescale.com>
- *
- * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -15,8 +14,6 @@
 #define CONFIG_MPC837x         1 /* MPC837x CPU specific */
 #define CONFIG_MPC837XEMDS     1 /* MPC837XEMDS board specific */
 
-#define        CONFIG_SYS_TEXT_BASE    0xFE000000
-
 /*
  * System Clock Setup
  */
@@ -97,7 +94,6 @@
  */
 #define CONFIG_SYS_OBIR                0x31100000
 
-#define CONFIG_BOARD_EARLY_INIT_R
 #define CONFIG_HWCONFIG
 
 /*
@@ -220,11 +216,8 @@
 /*
  * FLASH on the Local Bus
  */
-#define CONFIG_SYS_FLASH_CFI   /* use the Common Flash Interface */
-#define CONFIG_FLASH_CFI_DRIVER        /* use the CFI driver */
 #define CONFIG_SYS_FLASH_BASE  0xFE000000 /* FLASH base address */
 #define CONFIG_SYS_FLASH_SIZE  32 /* max FLASH size is 32M */
-#define CONFIG_SYS_FLASH_PROTECTION    1       /* Use h/w Flash protection. */
 
                                        /* Window base at flash base */
 #define CONFIG_SYS_LBLAWBAR0_PRELIM    CONFIG_SYS_FLASH_BASE
@@ -278,7 +271,6 @@
 /*
  * NAND Flash on the Local Bus
  */
-#define CONFIG_CMD_NAND                1
 #define CONFIG_SYS_MAX_NAND_DEVICE     1
 #define CONFIG_NAND_FSL_ELBC   1
 
@@ -304,7 +296,6 @@
 /*
  * Serial Port
  */
-#define CONFIG_CONS_INDEX      1
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE    1
 #define CONFIG_SYS_NS16550_CLK         get_bus_freq(0)
@@ -387,7 +378,6 @@ extern int board_pci_host_broken(void);
 /*
  * TSEC
  */
-#define CONFIG_TSEC_ENET       /* TSEC ethernet support */
 #define CONFIG_SYS_TSEC1_OFFSET        0x24000
 #define CONFIG_SYS_TSEC1       (CONFIG_SYS_IMMR+CONFIG_SYS_TSEC1_OFFSET)
 #define CONFIG_SYS_TSEC2_OFFSET        0x25000
@@ -396,7 +386,6 @@ extern int board_pci_host_broken(void);
 /*
  * TSEC ethernet configuration
  */
-#define CONFIG_MII             1 /* MII PHY management */
 #define CONFIG_TSEC1           1
 #define CONFIG_TSEC1_NAME      "eTSEC0"
 #define CONFIG_TSEC2           1
@@ -421,9 +410,6 @@ extern int board_pci_host_broken(void);
 /*
  * SATA
  */
-#define CONFIG_LIBATA
-#define CONFIG_FSL_SATA
-
 #define CONFIG_SYS_SATA_MAX_DEVICE     2
 #define CONFIG_SATA1
 #define CONFIG_SYS_SATA1_OFFSET        0x18000
@@ -458,25 +444,14 @@ extern int board_pci_host_broken(void);
  * BOOTP options
  */
 #define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
 
 /*
  * Command line configuration.
  */
 
-#if defined(CONFIG_PCI)
-    #define CONFIG_CMD_PCI
-#endif
-
-#define CONFIG_CMDLINE_EDITING 1       /* add command line history */
-#define CONFIG_AUTO_COMPLETE           /* add autocompletion support   */
-
 #undef CONFIG_WATCHDOG         /* watchdog disabled */
 
 #ifdef CONFIG_MMC
-#define CONFIG_FSL_ESDHC
 #define CONFIG_FSL_ESDHC_PIN_MUX
 #define CONFIG_SYS_FSL_ESDHC_ADDR      CONFIG_SYS_MPC83xx_ESDHC_ADDR
 #endif
@@ -484,21 +459,8 @@ extern int board_pci_host_broken(void);
 /*
  * Miscellaneous configurable options
  */
-#define CONFIG_SYS_LONGHELP            /* undef to save memory */
 #define CONFIG_SYS_LOAD_ADDR           0x2000000 /* default load address */
 
-#if defined(CONFIG_CMD_KGDB)
-       #define CONFIG_SYS_CBSIZE       1024 /* Console I/O Buffer Size */
-#else
-       #define CONFIG_SYS_CBSIZE       256 /* Console I/O Buffer Size */
-#endif
-
-                               /* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
-#define CONFIG_SYS_MAXARGS     16      /* max number of command args */
-                               /* Boot Argument Buffer Size */
-#define CONFIG_SYS_BARGSIZE    CONFIG_SYS_CBSIZE
-
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 256 MB of memory, since this is
@@ -641,8 +603,6 @@ extern int board_pci_host_broken(void);
 
 #define CONFIG_LOADADDR 800000 /* default location for tftp and bootm */
 
-#undef CONFIG_BOOTARGS         /* the boot command will set bootargs */
-
 #define CONFIG_EXTRA_ENV_SETTINGS                                      \
        "netdev=eth0\0"                                                 \
        "consoledev=ttyS0\0"                                            \