powerpc: Cleanup BOOTFLAG_* references

[platform/kernel/u-boot.git] / include / configs / MPC8360EMDS.h

diff --git a/include/configs/MPC8360EMDS.h b/include/configs/MPC8360EMDS.h
index fe6ec48..bc644ba 100644 (file)
--- a/include/configs/MPC8360EMDS.h
+++ b/include/configs/MPC8360EMDS.h
@@ -30,6 +30,9 @@
 #define CONFIG_MPC83xx         1 /* MPC83xx family */
 #define CONFIG_MPC8360         1 /* MPC8360 CPU specific */
 #define CONFIG_MPC8360EMDS     1 /* MPC8360EMDS board specific */
+
+#define        CONFIG_SYS_TEXT_BASE    0xFE000000
+
 #undef CONFIG_PQ_MDS_PIB /* POWERQUICC MDS Platform IO Board */
 #undef CONFIG_PQ_MDS_PIB_ATM /* QOC3 ATM card */
 
@@ -161,7 +164,7 @@
  * The reserved memory
  */
 
-#define CONFIG_SYS_MONITOR_BASE        TEXT_BASE /* start of monitor */
+#define CONFIG_SYS_MONITOR_BASE        CONFIG_SYS_TEXT_BASE /* start of monitor */
 
 #if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
 #define CONFIG_SYS_RAMBOOT
@@ -185,7 +188,8 @@
 /*
  * Local Bus Configuration & Clock Setup
  */
-#define CONFIG_SYS_LCRR                (LCRR_DBYP | LCRR_CLKDIV_4)
+#define CONFIG_SYS_LCRR_DBYP   LCRR_DBYP
+#define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_4
 #define CONFIG_SYS_LBC_LBCR            0x00000000
 
 /*
@@ -306,7 +310,6 @@
  * Serial Port
  */
 #define CONFIG_CONS_INDEX      1
-#undef CONFIG_SERIAL_SOFTWARE_FIFO
 #define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE    1
@@ -319,6 +322,7 @@
 #define CONFIG_SYS_NS16550_COM2        (CONFIG_SYS_IMMR+0x4600)
 
 #define CONFIG_CMDLINE_EDITING 1       /* add command line history     */
+#define CONFIG_AUTO_COMPLETE           /* add autocompletion support   */
 /* Use the HUSH parser */
 #define CONFIG_SYS_HUSH_PARSER
 #ifdef CONFIG_SYS_HUSH_PARSER
@@ -382,11 +386,13 @@
 #define CONFIG_NET_MULTI       1
 #endif
 
+#define CONFIG_HWCONFIG                1
+
 /*
  * QE UEC ethernet configuration
  */
 #define CONFIG_UEC_ETH
-#define CONFIG_ETHPRIME                "FSL UEC0"
+#define CONFIG_ETHPRIME                "UEC0"
 #define CONFIG_PHY_MODE_NEED_CHANGE
 
 #define CONFIG_UEC_ETH1                /* GETH1 */
@@ -397,7 +403,8 @@
 #define CONFIG_SYS_UEC1_TX_CLK         QE_CLK9
 #define CONFIG_SYS_UEC1_ETH_TYPE       GIGA_ETH
 #define CONFIG_SYS_UEC1_PHY_ADDR       0
-#define CONFIG_SYS_UEC1_INTERFACE_MODE ENET_1000_GMII
+#define CONFIG_SYS_UEC1_INTERFACE_TYPE RGMII_ID
+#define CONFIG_SYS_UEC1_INTERFACE_SPEED 1000
 #endif
 
 #define CONFIG_UEC_ETH2                /* GETH2 */
@@ -408,7 +415,8 @@
 #define CONFIG_SYS_UEC2_TX_CLK         QE_CLK4
 #define CONFIG_SYS_UEC2_ETH_TYPE       GIGA_ETH
 #define CONFIG_SYS_UEC2_PHY_ADDR       1
-#define CONFIG_SYS_UEC2_INTERFACE_MODE ENET_1000_GMII
+#define CONFIG_SYS_UEC2_INTERFACE_TYPE RGMII_ID
+#define CONFIG_SYS_UEC2_INTERFACE_SPEED 1000
 #endif
 
 /*
@@ -481,16 +489,17 @@
 
 /*
  * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
+ * have to be in the first 256 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CONFIG_SYS_BOOTMAPSZ           (8 << 20) /* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ           (256 << 20) /* Initial Memory map for Linux */
 
 /*
  * Core HID Setup
  */
-#define CONFIG_SYS_HID0_INIT           0x000000000
-#define CONFIG_SYS_HID0_FINAL          HID0_ENABLE_MACHINE_CHECK
+#define CONFIG_SYS_HID0_INIT   0x000000000
+#define CONFIG_SYS_HID0_FINAL  (HID0_ENABLE_MACHINE_CHECK | \
+                                HID0_ENABLE_INSTRUCTION_CACHE)
 #define CONFIG_SYS_HID2                HID2_HBE
 
 /*
@@ -561,14 +570,6 @@
 #define CONFIG_SYS_DBAT7U      CONFIG_SYS_IBAT7U
 #endif
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01 /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM  0x02 /* Software reboot */
-
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   230400  /* speed of kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX  2       /* which serial port to use */
@@ -582,14 +583,12 @@
 
 #if defined(CONFIG_UEC_ETH)
 #define CONFIG_HAS_ETH0
-#define CONFIG_ETHADDR 00:04:9f:ef:01:01
 #define CONFIG_HAS_ETH1
-#define CONFIG_ETH1ADDR 00:04:9f:ef:01:02
 #endif
 
 #define CONFIG_BAUDRATE 115200
 
-#define CONFIG_LOADADDR 500000 /* default location for tftp and bootm */
+#define CONFIG_LOADADDR 800000 /* default location for tftp and bootm */
 
 #define CONFIG_BOOTDELAY 6     /* -1 disables auto-boot */
 #undef CONFIG_BOOTARGS         /* the boot command will set bootargs */
@@ -599,7 +598,7 @@
    "consoledev=ttyS0\0"                                                        \
    "ramdiskaddr=1000000\0"                                             \
    "ramdiskfile=ramfs.83xx\0"                                          \
-   "fdtaddr=400000\0"                                                  \
+   "fdtaddr=780000\0"                                                  \
    "fdtfile=mpc836x_mds.dtb\0"                                         \
    ""