Merge branch 'master' of git://git.denx.de/u-boot-sunxi
[platform/kernel/u-boot.git] / include / configs / MPC8349ITX.h
index 6d35d70..111023b 100644 (file)
@@ -1,7 +1,6 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright (C) Freescale Semiconductor, Inc. 2006.
- *
- * SPDX-License-Identifier:    GPL-2.0+
  */
 
 /*
 #define CONFIG_MPC834x         /* MPC834x family (8343, 8347, 8349) */
 #define CONFIG_MPC8349         /* MPC8349 specific */
 
-#ifndef CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_TEXT_BASE   0xFEF00000
-#endif
-
 #define CONFIG_SYS_IMMR        0xE0000000      /* The IMMR is relocated to here */
 
 #define CONFIG_MISC_INIT_F
-#define CONFIG_MISC_INIT_R
 
 /*
  * On-board devices
 /* The CF card interface on the back of the board */
 #define CONFIG_COMPACT_FLASH
 #define CONFIG_VSC7385_ENET    /* VSC7385 ethernet support */
-#define CONFIG_SATA_SIL3114    /* SIL3114 SATA controller */
 #define CONFIG_SYS_USB_HOST    /* use the EHCI USB controller */
 #endif
 
 #define CONFIG_RTC_DS1337
 #define CONFIG_SYS_I2C
-#define CONFIG_TSEC_ENET               /* TSEC Ethernet support */
 
 /*
  * Device configurations
 #ifdef CONFIG_SATA_SIL3114
 
 #define CONFIG_SYS_SATA_MAX_DEVICE      4
-#define CONFIG_LIBATA
 #define CONFIG_LBA48
 
 #endif
  *Flash on the Local Bus
  */
 
-#define CONFIG_SYS_FLASH_CFI           /* use the Common Flash Interface */
-#define CONFIG_FLASH_CFI_DRIVER                /* use the CFI driver */
 #define CONFIG_SYS_FLASH_BASE          0xFE000000      /* start of FLASH   */
 #define CONFIG_SYS_FLASH_EMPTY_INFO
 /* 127 64KB sectors + 8 8KB sectors per device */
@@ -212,7 +201,6 @@ boards, we say we have two, but don't display a message if we find only one. */
 #define CONFIG_SYS_FLASH_BANKS_LIST    \
                {CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE + 0x800000}
 #define CONFIG_SYS_FLASH_SIZE          16      /* FLASH size in MB */
-#define CONFIG_SYS_FLASH_PROTECTION    1       /* Use h/w Flash protection. */
 
 /* Vitesse 7385 */
 
@@ -346,7 +334,6 @@ boards, we say we have two, but don't display a message if we find only one. */
 /*
  * Serial Port
  */
-#define CONFIG_CONS_INDEX      1
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE    1
 #define CONFIG_SYS_NS16550_CLK         get_bus_freq(0)
@@ -417,10 +404,6 @@ boards, we say we have two, but don't display a message if we find only one. */
 /* TSEC */
 
 #ifdef CONFIG_TSEC_ENET
-
-#define CONFIG_MII
-#define CONFIG_PHY_GIGE                /* In case CONFIG_CMD_MII is specified */
-
 #define CONFIG_TSEC1
 
 #ifdef CONFIG_TSEC1
@@ -452,14 +435,11 @@ boards, we say we have two, but don't display a message if we find only one. */
 #define CONFIG_ENV_OVERWRITE
 
 #ifndef CONFIG_SYS_RAMBOOT
-  #define CONFIG_ENV_IS_IN_FLASH
   #define CONFIG_ENV_ADDR      \
                        (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
   #define CONFIG_ENV_SECT_SIZE 0x10000 /* 64K (one sector) for environment */
   #define CONFIG_ENV_SIZE      0x2000
 #else
-  #undef  CONFIG_FLASH_CFI_DRIVER
-  #define CONFIG_ENV_IS_NOWHERE        /* Store ENV in memory only */
   #define CONFIG_ENV_ADDR      (CONFIG_SYS_MONITOR_BASE - 0x1000)
   #define CONFIG_ENV_SIZE      0x2000
 #endif
@@ -471,35 +451,6 @@ boards, we say we have two, but don't display a message if we find only one. */
  * BOOTP options
  */
 #define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-/*
- * Command line configuration.
- */
-#define CONFIG_CMD_IRQ
-#define CONFIG_CMD_SDRAM
-
-#if defined(CONFIG_COMPACT_FLASH) || defined(CONFIG_SATA_SIL3114) \
-                               || defined(CONFIG_USB_STORAGE)
-       #define CONFIG_SUPPORT_VFAT
-#endif
-
-#ifdef CONFIG_COMPACT_FLASH
-       #define CONFIG_CMD_IDE
-#endif
-
-#ifdef CONFIG_SATA_SIL3114
-       #define CONFIG_CMD_SATA
-#endif
-
-#if defined(CONFIG_SATA_SIL3114) || defined(CONFIG_USB_STORAGE)
-#endif
-
-#ifdef CONFIG_PCI
-       #define CONFIG_CMD_PCI
-#endif
 
 /* Watchdog */
 #undef CONFIG_WATCHDOG         /* watchdog disabled */
@@ -507,25 +458,10 @@ boards, we say we have two, but don't display a message if we find only one. */
 /*
  * Miscellaneous configurable options
  */
-#define CONFIG_SYS_LONGHELP            /* undef to save memory */
-#define CONFIG_CMDLINE_EDITING         /* Command-line editing */
-#define CONFIG_AUTO_COMPLETE           /* add autocompletion support */
 
 #define CONFIG_SYS_LOAD_ADDR   0x2000000       /* default load address */
 #define CONFIG_LOADADDR        800000  /* default location for tftp and bootm */
 
-#if defined(CONFIG_CMD_KGDB)
-       #define CONFIG_SYS_CBSIZE       1024    /* Console I/O Buffer Size */
-#else
-       #define CONFIG_SYS_CBSIZE       256     /* Console I/O Buffer Size */
-#endif
-
-                               /* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_MAXARGS     16      /* max number of command args */
-                               /* Boot Argument Buffer Size */
-#define CONFIG_SYS_BARGSIZE    CONFIG_SYS_CBSIZE
-
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 256 MB of memory, since this is
@@ -703,12 +639,6 @@ boards, we say we have two, but don't display a message if we find only one. */
 
 #define CONFIG_NETDEV          "eth0"
 
-#ifdef CONFIG_MPC8349ITX
-#define CONFIG_HOSTNAME                "mpc8349emitx"
-#else
-#define CONFIG_HOSTNAME                "mpc8349emitxgp"
-#endif
-
 /* Default path and filenames */
 #define CONFIG_ROOTPATH                "/nfsroot/rootfs"
 #define CONFIG_BOOTFILE                "uImage"
@@ -722,16 +652,6 @@ boards, we say we have two, but don't display a message if we find only one. */
 #endif
 
 
-#define CONFIG_BOOTARGS \
-       "root=/dev/nfs rw" \
-       " nfsroot=" __stringify(CONFIG_SERVERIP) ":" CONFIG_ROOTPATH    \
-       " ip=" __stringify(CONFIG_IPADDR) ":"           \
-               __stringify(CONFIG_SERVERIP) ":"        \
-               __stringify(CONFIG_GATEWAYIP) ":"       \
-               __stringify(CONFIG_NETMASK) ":"         \
-               CONFIG_HOSTNAME ":" CONFIG_NETDEV ":off"                \
-       " console=" __stringify(CONSOLE) "," __stringify(CONFIG_BAUDRATE)
-
 #define CONFIG_EXTRA_ENV_SETTINGS \
        "console=" __stringify(CONSOLE) "\0"                    \
        "netdev=" CONFIG_NETDEV "\0"                                    \