Merge branch 'master' of git://git.denx.de/u-boot-net

[platform/kernel/u-boot.git] / include / configs / MPC8349EMDS.h

diff --git a/include/configs/MPC8349EMDS.h b/include/configs/MPC8349EMDS.h
index a80a696..a2fa783 100644 (file)
--- a/include/configs/MPC8349EMDS.h
+++ b/include/configs/MPC8349EMDS.h
@@ -13,11 +13,12 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#define CONFIG_DISPLAY_BOARDINFO
+
 /*
  * High Level Configuration Options
  */
 #define CONFIG_E300            1       /* E300 Family */
-#define CONFIG_MPC83xx         1       /* MPC83xx family */
 #define CONFIG_MPC834x         1       /* MPC834x family */
 #define CONFIG_MPC8349         1       /* MPC8349 specific */
 #define CONFIG_MPC8349EMDS     1       /* MPC8349EMDS board specific */
@@ -67,6 +68,7 @@
  */
 #define CONFIG_SYS_FSL_DDR2
 #ifdef CONFIG_SYS_FSL_DDR2
+#define CONFIG_SYS_FSL_DDRC_GEN2
 #define CONFIG_SYS_SPD_BUS_NUM 0
 #define SPD_EEPROM_ADDRESS1    0x52
 #define SPD_EEPROM_ADDRESS2    0x51
@@ -223,7 +225,7 @@
                        (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET      CONFIG_SYS_GBL_DATA_OFFSET
 
-#define CONFIG_SYS_MONITOR_LEN (384 * 1024)    /* Reserve 384 kB for Mon */
+#define CONFIG_SYS_MONITOR_LEN (512 * 1024)    /* Reserve 512 kB for Mon */
 #define CONFIG_SYS_MALLOC_LEN  (256 * 1024)    /* Reserved for malloc */
 
 /*
@@ -316,7 +318,6 @@
  * Serial Port
  */
 #define CONFIG_CONS_INDEX     1
-#define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE    1
 #define CONFIG_SYS_NS16550_CLK         get_bus_freq(0)
@@ -329,13 +330,6 @@
 
 #define CONFIG_CMDLINE_EDITING 1       /* add command line history     */
 #define CONFIG_AUTO_COMPLETE           /* add autocompletion support   */
-/* Use the HUSH parser */
-#define CONFIG_SYS_HUSH_PARSER
-
-/* pass open firmware flat tree */
-#define CONFIG_OF_LIBFDT       1
-#define CONFIG_OF_BOARD_SETUP  1
-#define CONFIG_OF_STDOUT_VIA_ALIAS     1
 
 /* I2C */
 #define CONFIG_SYS_I2C
@@ -470,7 +464,6 @@
 #define CONFIG_LOADS_ECHO      1       /* echo on for serial download */
 #define CONFIG_SYS_LOADS_BAUD_CHANGE   1       /* allow baudrate change */
 
-
 /*
  * BOOTP options
  */
@@ -479,27 +472,15 @@
 #define CONFIG_BOOTP_GATEWAY
 #define CONFIG_BOOTP_HOSTNAME
 
-
 /*
  * Command line configuration.
  */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_I2C
 #define CONFIG_CMD_DATE
-#define CONFIG_CMD_MII
 
 #if defined(CONFIG_PCI)
     #define CONFIG_CMD_PCI
 #endif
 
-#if defined(CONFIG_SYS_RAMBOOT)
-    #undef CONFIG_CMD_SAVEENV
-    #undef CONFIG_CMD_LOADS
-#endif
-
-
 #undef CONFIG_WATCHDOG                 /* watchdog disabled */
 
 /*
@@ -527,6 +508,7 @@
  */
                                /* Initial Memory map for Linux*/
 #define CONFIG_SYS_BOOTMAPSZ   (256 << 20)
+#define CONFIG_SYS_BOOTM_LEN   (64 << 20)      /* Increase max gunzip size */
 
 #define CONFIG_SYS_RCWH_PCIHOST 0x80000000 /* PCIHOST  */
 
@@ -633,7 +615,6 @@
        HID0_ENABLE_M_BIT |\
        HID0_ENABLE_ADDRESS_BROADCAST) */
 
-
 #define CONFIG_SYS_HID2 HID2_HBE
 #define CONFIG_HIGH_BATS       1       /* High BATs supported */
 
@@ -736,7 +717,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   230400  /* speed of kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX  2       /* which serial port to use */
 #endif
 
 /*
@@ -755,7 +735,6 @@
 
 #define CONFIG_LOADADDR        800000  /* default location for tftp and bootm */
 
-#define CONFIG_BOOTDELAY       6       /* -1 disables auto-boot */
 #undef  CONFIG_BOOTARGS                /* the boot command will set bootargs */
 
 #define CONFIG_BAUDRATE         115200