rename CFG_ENV macros to CONFIG_ENV

[platform/kernel/u-boot.git] / include / configs / MPC832XEMDS.h

diff --git a/include/configs/MPC832XEMDS.h b/include/configs/MPC832XEMDS.h
index f62ca2c..01cf557 100644 (file)
--- a/include/configs/MPC832XEMDS.h
+++ b/include/configs/MPC832XEMDS.h
@@ -20,8 +20,6 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#undef DEBUG
-
 /*
  * High Level Configuration Options
  */
@@ -30,6 +28,8 @@
 #define CONFIG_MPC83XX         1       /* MPC83xx family */
 #define CONFIG_MPC832X         1       /* MPC832x CPU specific */
 #define CONFIG_MPC832XEMDS     1       /* MPC832XEMDS board specific */
+#undef CONFIG_PQ_MDS_PIB /* POWERQUICC MDS Platform IO Board */
+#undef CONFIG_PQ_MDS_PIB_ATM   /* QOC3 ATM card */
 
 /*
  * System Clock Setup
@@ -87,6 +87,7 @@
 #define CFG_SICRL              0x00000000
 
 #define CONFIG_BOARD_EARLY_INIT_F      /* call board_pre_init */
+#define CONFIG_BOARD_EARLY_INIT_R
 
 /*
  * IMMR new address
@@ -142,6 +143,7 @@
 #undef  CFG_RAMBOOT
 #endif
 
+/* CFG_MONITOR_LEN must be a multiple of CONFIG_ENV_SECT_SIZE */
 #define CFG_MONITOR_LEN                (256 * 1024)    /* Reserve 256 kB for Mon */
 #define CFG_MALLOC_LEN         (128 * 1024)    /* Reserved for malloc */
 
@@ -164,7 +166,7 @@
  * FLASH on the Local Bus
  */
 #define CFG_FLASH_CFI          /* use the Common Flash Interface */
-#define CFG_FLASH_CFI_DRIVER   /* use the CFI driver */
+#define CONFIG_FLASH_CFI_DRIVER        /* use the CFI driver */
 #define CFG_FLASH_BASE         0xFE000000      /* FLASH base address */
 #define CFG_FLASH_SIZE         16      /* FLASH size is 16M */
 
@@ -315,17 +317,9 @@
 #endif
 
 /* pass open firmware flat tree */
-#define CONFIG_OF_FLAT_TREE    1
+#define CONFIG_OF_LIBFDT       1
 #define CONFIG_OF_BOARD_SETUP  1
-
-/* maximum size of the flat tree (8K) */
-#define OF_FLAT_TREE_MAX_SIZE  8192
-
-#define OF_CPU                 "PowerPC,8323@0"
-#define OF_SOC                 "soc8323@e0000000"
-#define OF_QE                  "qe@e0100000"
-#define OF_TBCLK               (bd->bi_busfreq / 4)
-#define OF_STDOUT_PATH         "/soc8323@e0000000/serial@4500"
+#define CONFIG_OF_STDOUT_VIA_ALIAS     1
 
 /* I2C */
 #define CONFIG_HARD_I2C                /* I2C with hardware support */
@@ -352,7 +346,7 @@
 #define CFG_PCI_MMIO_BASE      0x90000000
 #define CFG_PCI_MMIO_PHYS      CFG_PCI_MMIO_BASE
 #define CFG_PCI_MMIO_SIZE      0x10000000      /* 256M */
-#define CFG_PCI_IO_BASE                0xE0300000
+#define CFG_PCI_IO_BASE                0x00000000
 #define CFG_PCI_IO_PHYS                0xE0300000
 #define CFG_PCI_IO_SIZE                0x100000        /* 1M */
 
@@ -381,7 +375,7 @@
  * QE UEC ethernet configuration
  */
 #define CONFIG_UEC_ETH
-#define CONFIG_ETHPRIME                "Freescale GETH"
+#define CONFIG_ETHPRIME                "FSL UEC0"
 
 #define CONFIG_UEC_ETH1                /* ETH3 */
 
@@ -409,15 +403,15 @@
  * Environment
  */
 #ifndef CFG_RAMBOOT
-       #define CFG_ENV_IS_IN_FLASH     1
-       #define CFG_ENV_ADDR            (CFG_MONITOR_BASE + 0x40000)
-       #define CFG_ENV_SECT_SIZE       0x40000 /* 256K(one sector) for env */
-       #define CFG_ENV_SIZE            0x2000
+       #define CONFIG_ENV_IS_IN_FLASH  1
+       #define CONFIG_ENV_ADDR         (CFG_MONITOR_BASE + CFG_MONITOR_LEN)
+       #define CONFIG_ENV_SECT_SIZE    0x20000
+       #define CONFIG_ENV_SIZE         0x2000
 #else
        #define CFG_NO_FLASH            1       /* Flash is not usable now */
-       #define CFG_ENV_IS_NOWHERE      1       /* Store ENV in memory only */
-       #define CFG_ENV_ADDR            (CFG_MONITOR_BASE - 0x1000)
-       #define CFG_ENV_SIZE            0x2000
+       #define CONFIG_ENV_IS_NOWHERE   1       /* Store ENV in memory only */
+       #define CONFIG_ENV_ADDR         (CFG_MONITOR_BASE - 0x1000)
+       #define CONFIG_ENV_SIZE         0x2000
 #endif
 
 #define CONFIG_LOADS_ECHO      1       /* echo on for serial download */
@@ -486,18 +480,11 @@
 #define CFG_HID2               HID2_HBE
 
 /*
- * Cache Config
- */
-#define CFG_DCACHE_SIZE                16384
-#define CFG_CACHELINE_SIZE     32
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT    5       /*log base 2 of the above value */
-#endif
-
-/*
  * MMU Setup
  */
 
+#define CONFIG_HIGH_BATS       1       /* High BATs supported */
+
 /* DDR: cache cacheable */
 #define CFG_IBAT0L     (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
 #define CFG_IBAT0U     (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
@@ -579,6 +566,7 @@
 #define CONFIG_ENV_OVERWRITE
 
 #if defined(CONFIG_UEC_ETH)
+#define CONFIG_HAS_ETH0
 #define CONFIG_ETHADDR 00:04:9f:ef:03:01
 #define CONFIG_HAS_ETH1
 #define CONFIG_ETH1ADDR        00:04:9f:ef:03:02
@@ -586,9 +574,9 @@
 
 #define CONFIG_BAUDRATE        115200
 
-#define CONFIG_LOADADDR        200000  /* default location for tftp and bootm */
+#define CONFIG_LOADADDR        500000  /* default location for tftp and bootm */
 
-#define CONFIG_BOOTDELAY 6     /* -1 disables auto-boot */
+#define CONFIG_BOOTDELAY 6     /* -1 disables auto-boot */
 #undef  CONFIG_BOOTARGS                /* the boot command will set bootargs */
 
 #define CONFIG_EXTRA_ENV_SETTINGS                                      \
@@ -597,7 +585,7 @@
    "ramdiskaddr=1000000\0"                                             \
    "ramdiskfile=ramfs.83xx\0"                                          \
    "fdtaddr=400000\0"                                                  \
-   "fdtfile=mpc832xemds.dtb\0"                                         \
+   "fdtfile=mpc832x_mds.dtb\0"                                         \
    ""
 
 #define CONFIG_NFSBOOTCOMMAND                                          \