Remove unused CFG_EEPROM_PAGE_WRITE_ENABLE references
[platform/kernel/u-boot.git] / include / configs / MPC8323ERDB.h
index 92d7aa4..b95f54d 100644 (file)
 #undef  CFG_RAMBOOT
 #endif
 
-/* CFG_MONITOR_LEN must be a multiple of CFG_ENV_SECT_SIZE */
+/* CFG_MONITOR_LEN must be a multiple of CONFIG_ENV_SECT_SIZE */
 #define CFG_MONITOR_LEN                (256 * 1024)    /* Reserve 256 kB for Mon */
 #define CFG_MALLOC_LEN         (128 * 1024)    /* Reserved for malloc */
 
  * FLASH on the Local Bus
  */
 #define CFG_FLASH_CFI          /* use the Common Flash Interface */
-#define CFG_FLASH_CFI_DRIVER   /* use the CFI driver */
+#define CONFIG_FLASH_CFI_DRIVER        /* use the CFI driver */
 #define CFG_FLASH_BASE         0xFE000000      /* FLASH base address */
 #define CFG_FLASH_SIZE         16      /* FLASH size is 16M */
+#define CFG_FLASH_PROTECTION   1               /* Use h/w Flash protection. */
 
 #define CFG_LBLAWBAR0_PRELIM   CFG_FLASH_BASE  /* Window base at flash base */
 #define CFG_LBLAWAR0_PRELIM    0x80000018      /* 32MB window size */
 #define CFG_I2C_EEPROM_ADDR_LEN                2
 #define CFG_EEPROM_PAGE_WRITE_BITS     6
 #define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10
-#define CFG_EEPROM_PAGE_WRITE_ENABLE
 
 /*
  * General PCI
  * Environment
  */
 #ifndef CFG_RAMBOOT
-       #define CFG_ENV_IS_IN_FLASH     1
-       #define CFG_ENV_ADDR            (CFG_MONITOR_BASE + CFG_MONITOR_LEN)
-       #define CFG_ENV_SECT_SIZE       0x20000
-       #define CFG_ENV_SIZE            0x2000
+       #define CONFIG_ENV_IS_IN_FLASH  1
+       #define CONFIG_ENV_ADDR         (CFG_MONITOR_BASE + CFG_MONITOR_LEN)
+       #define CONFIG_ENV_SECT_SIZE    0x20000
+       #define CONFIG_ENV_SIZE         0x2000
 #else
        #define CFG_NO_FLASH            1       /* Flash is not usable now */
-       #define CFG_ENV_IS_NOWHERE      1       /* Store ENV in memory only */
-       #define CFG_ENV_ADDR            (CFG_MONITOR_BASE - 0x1000)
-       #define CFG_ENV_SIZE            0x2000
+       #define CONFIG_ENV_IS_NOWHERE   1       /* Store ENV in memory only */
+       #define CONFIG_ENV_ADDR         (CFG_MONITOR_BASE - 0x1000)
+       #define CONFIG_ENV_SIZE         0x2000
 #endif
 
 #define CONFIG_LOADS_ECHO      1       /* echo on for serial download */
 /*
  * MMU Setup
  */
+#define CONFIG_HIGH_BATS       1       /* High BATs supported */
 
 /* DDR: cache cacheable */
 #define CFG_IBAT0L     (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
 #define CONFIG_UBOOTPATH       u-boot.bin      /* U-Boot image on TFTP server */
 #define CONFIG_FDTFILE         mpc832x_rdb.dtb
 
-#define CONFIG_LOADADDR                200000  /* default location for tftp and bootm */
-#define CONFIG_BOOTDELAY       -1      /* -1 disables auto-boot */
+#define CONFIG_LOADADDR                500000  /* default location for tftp and bootm */
+#define CONFIG_BOOTDELAY             /* -1 disables auto-boot */
 #define CONFIG_BAUDRATE                115200
 
 #define XMK_STR(x)     #x