powerpc: Cleanup BOOTFLAG_* references

[platform/kernel/u-boot.git] / include / configs / MPC8315ERDB.h

diff --git a/include/configs/MPC8315ERDB.h b/include/configs/MPC8315ERDB.h
index cfed4ca..17ce3bc 100644 (file)
--- a/include/configs/MPC8315ERDB.h
+++ b/include/configs/MPC8315ERDB.h
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2007-2009 Freescale Semiconductor, Inc.
+ * Copyright (C) 2007-2010 Freescale Semiconductor, Inc.
  *
  * Dave Liu <daveliu@freescale.com>
  *
@@ -25,9 +25,13 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#ifdef CONFIG_MK_NAND
+#ifdef CONFIG_NAND
 #define CONFIG_NAND_U_BOOT             1
-#define CONFIG_RAMBOOT_TEXT_BASE       0x00100000
+#define CONFIG_SYS_TEXT_BASE   0x00100000
+#endif
+
+#ifndef CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_TEXT_BASE   0xFE000000
 #endif
 
 /*
@@ -177,7 +181,7 @@
 /*
  * The reserved memory
  */
-#define CONFIG_SYS_MONITOR_BASE        TEXT_BASE /* start of monitor */
+#define CONFIG_SYS_MONITOR_BASE        CONFIG_SYS_TEXT_BASE /* start of monitor */
 
 #define CONFIG_SYS_MONITOR_LEN         (384 * 1024) /* Reserve 384 kB for Mon */
 #define CONFIG_SYS_MALLOC_LEN          (512 * 1024) /* Reserved for malloc */
@@ -197,6 +201,7 @@
 #define CONFIG_SYS_LCRR_DBYP   LCRR_DBYP
 #define CONFIG_SYS_LCRR_CLKDIV         LCRR_CLKDIV_2
 #define CONFIG_SYS_LBC_LBCR            0x00040000
+#define CONFIG_FSL_ELBC                1
 
 /*
  * FLASH on the Local Bus
@@ -242,6 +247,13 @@
 #define CONFIG_SYS_NAND_BASE           0xE0600000
 #endif
 
+#define CONFIG_MTD_DEVICE
+#define CONFIG_MTD_PARTITION
+#define CONFIG_CMD_MTDPARTS
+#define MTDIDS_DEFAULT                 "nand0=e0600000.flash"
+#define MTDPARTS_DEFAULT               \
+       "mtdparts=e0600000.flash:512k(uboot),128k(env),3m@1m(kernel),-(fs)"
+
 #define CONFIG_SYS_MAX_NAND_DEVICE     1
 #define CONFIG_MTD_NAND_VERIFY_WRITE   1
 #define CONFIG_CMD_NAND                        1
@@ -297,7 +309,6 @@
  * Serial Port
  */
 #define CONFIG_CONS_INDEX      1
-#undef CONFIG_SERIAL_SOFTWARE_FIFO
 #define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE    1
@@ -504,6 +515,7 @@
 #endif
 
 #define CONFIG_CMDLINE_EDITING 1       /* add command line history */
+#define CONFIG_AUTO_COMPLETE           /* add autocompletion support   */
 
 #undef CONFIG_WATCHDOG         /* watchdog disabled */
 
@@ -527,16 +539,17 @@
 
 /*
  * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
+ * have to be in the first 256 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CONFIG_SYS_BOOTMAPSZ           (8 << 20) /* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ           (256 << 20) /* Initial Memory map for Linux */
 
 /*
  * Core HID Setup
  */
-#define CONFIG_SYS_HID0_INIT           0x000000000
-#define CONFIG_SYS_HID0_FINAL          (HID0_ENABLE_MACHINE_CHECK | \
+#define CONFIG_SYS_HID0_INIT   0x000000000
+#define CONFIG_SYS_HID0_FINAL  (HID0_ENABLE_MACHINE_CHECK | \
+                                HID0_ENABLE_INSTRUCTION_CACHE | \
                                 HID0_ENABLE_DYNAMIC_POWER_MANAGMENT)
 #define CONFIG_SYS_HID2                HID2_HBE
 
@@ -595,14 +608,6 @@
 #define CONFIG_SYS_DBAT7L      CONFIG_SYS_IBAT7L
 #define CONFIG_SYS_DBAT7U      CONFIG_SYS_IBAT7U
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01 /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM  0x02 /* Software reboot */
-
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   230400  /* speed of kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX  2       /* which serial port to use */
@@ -616,9 +621,7 @@
 
 #if defined(CONFIG_TSEC_ENET)
 #define CONFIG_HAS_ETH0
-#define CONFIG_ETHADDR         04:00:00:00:00:0A
 #define CONFIG_HAS_ETH1
-#define CONFIG_ETH1ADDR                04:00:00:00:00:0B
 #endif
 
 #define CONFIG_BAUDRATE 115200