Merge https://gitlab.denx.de/u-boot/custodians/u-boot-imx

[platform/kernel/u-boot.git] / include / configs / MPC8313ERDB_NAND.h

diff --git a/include/configs/MPC8313ERDB_NAND.h b/include/configs/MPC8313ERDB_NAND.h
index 08c5b56..2db0c6f 100644 (file)
--- a/include/configs/MPC8313ERDB_NAND.h
+++ b/include/configs/MPC8313ERDB_NAND.h
@@ -9,6 +9,8 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#include <linux/stringify.h>
+
 /*
  * High Level Configuration Options
  */
@@ -43,7 +45,6 @@
 #endif
 
 #define CONFIG_PCI_INDIRECT_BRIDGE
-#define CONFIG_FSL_ELBC 1
 
 /*
  * On-board devices
@@ -58,9 +59,6 @@
 #define CONFIG_DEFAULT_IMMR    CONFIG_SYS_IMMR
 #endif
 
-#define CONFIG_SYS_MEMTEST_START       0x00001000
-#define CONFIG_SYS_MEMTEST_END         0x07f00000
-
 /* Early revs of this board will lock up hard when attempting
  * to access the PMC registers, unless a JTAG debugger is
  * connected, or some resistor modifications are made.
@@ -86,9 +84,7 @@
 /*
  * DDR Setup
  */
-#define CONFIG_SYS_DDR_BASE            0x00000000 /* DDR is system memory*/
-#define CONFIG_SYS_SDRAM_BASE          CONFIG_SYS_DDR_BASE
-#define CONFIG_SYS_DDR_SDRAM_BASE      CONFIG_SYS_DDR_BASE
+#define CONFIG_SYS_SDRAM_BASE          0x00000000 /* DDR is system memory*/
 
 /*
  * Manually set up DDR parameters, as this board does not
@@ -188,16 +184,6 @@
 #define CONFIG_SYS_MONITOR_LEN (512 * 1024)    /* Reserve 512 kB for Mon */
 #define CONFIG_SYS_MALLOC_LEN  (512 * 1024)    /* Reserved for malloc */
 
-/*
- * Local Bus LCRR and LBCR regs
- */
-#define CONFIG_SYS_LBC_LBCR    (0x00040000 /* TODO */ \
-                               | (0xFF << LBCR_BMT_SHIFT) \
-                               | 0xF)  /* 0x0004ff0f */
-
-                               /* LB refresh timer prescal, 266MHz/32 */
-#define CONFIG_SYS_LBC_MRTPR   0x20000000  /*TODO */
-
 /* drivers/mtd/nand/raw/nand.c */
 #if defined(CONFIG_SPL_BUILD)
 #define CONFIG_SYS_NAND_BASE           0xFFF00000
@@ -309,12 +295,7 @@
 /*
  * Environment
  */
-#define CONFIG_ENV_OFFSET              (512 * 1024)
-#define CONFIG_ENV_SECT_SIZE   CONFIG_SYS_NAND_BLOCK_SIZE
-#define CONFIG_ENV_SIZE                CONFIG_ENV_SECT_SIZE
-#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
-#define CONFIG_ENV_RANGE               (CONFIG_ENV_SECT_SIZE * 4)
-#define CONFIG_ENV_OFFSET_REDUND       (CONFIG_ENV_OFFSET + CONFIG_ENV_RANGE)
+#define CONFIG_ENV_RANGE               (CONFIG_SYS_NAND_BLOCK_SIZE * 4)
 
 #define CONFIG_LOADS_ECHO      1       /* echo on for serial download */
 #define CONFIG_SYS_LOADS_BAUD_CHANGE   1       /* allow baudrate change */
@@ -325,10 +306,6 @@
 #define CONFIG_BOOTP_BOOTFILESIZE
 
 /*
- * Command line configuration.
- */
-
-/*
  * Miscellaneous configurable options
  */
 #define CONFIG_SYS_LOAD_ADDR   0x2000000       /* default load address */
@@ -358,7 +335,6 @@
 /*
  * Environment Configuration
  */
-#define CONFIG_ENV_OVERWRITE
 
 #define CONFIG_NETDEV          "eth1"