Rename CONFIG_SYS_INIT_RAM_END into CONFIG_SYS_INIT_RAM_SIZE

[platform/kernel/u-boot.git] / include / configs / MPC8260ADS.h

diff --git a/include/configs/MPC8260ADS.h b/include/configs/MPC8260ADS.h
index 39b8b8f..c3ab8a7 100644 (file)
--- a/include/configs/MPC8260ADS.h
+++ b/include/configs/MPC8260ADS.h
@@ -48,12 +48,16 @@
 
 #define CONFIG_MPC8260ADS      1       /* Motorola PQ2 ADS family board */
 
+#ifndef CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_TEXT_BASE   0xFFF00000      /* Standard: boot high */
+#endif
+
 #define CONFIG_CPM2            1       /* Has a CPM2 */
 
 /*
  * Figure out if we are booting low via flash HRCW or high via the BCSR.
  */
-#if (TEXT_BASE != 0xFFF00000)          /* Boot low (flash HRCW) */
+#if (CONFIG_SYS_TEXT_BASE != 0xFFF00000)               /* Boot low (flash HRCW) */
 #   define CONFIG_SYS_LOWBOOT          1
 #endif
 
@@ -150,6 +154,9 @@
  * GPIO pins used for bit-banged MII communications
  */
 #define MDIO_PORT      2               /* Port C */
+#define MDIO_DECLARE   volatile ioport_t *iop = ioport_addr ( \
+                               (immap_t *) CONFIG_SYS_IMMR, MDIO_PORT )
+#define MDC_DECLARE    MDIO_DECLARE
 
 #if CONFIG_ADSTYPE == CONFIG_SYS_8272ADS
 #define CONFIG_SYS_MDIO_PIN    0x00002000      /* PC18 */
@@ -341,9 +348,9 @@
 #define BCSR_PCI_MODE          0x01000000
 
 #define CONFIG_SYS_INIT_RAM_ADDR       CONFIG_SYS_IMMR
-#define CONFIG_SYS_INIT_RAM_END        0x2000  /* End of used area in DPRAM    */
+#define CONFIG_SYS_INIT_RAM_SIZE       0x2000  /* Size of used area in DPRAM   */
 #define CONFIG_SYS_GBL_DATA_SIZE       128     /* size in bytes reserved for initial data */
-#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET      CONFIG_SYS_GBL_DATA_OFFSET
 
 #ifdef CONFIG_SYS_LOWBOOT
@@ -370,10 +377,8 @@
 #define CONFIG_SYS_HRCW_SLAVE6 0
 #define CONFIG_SYS_HRCW_SLAVE7 0
 
-#define BOOTFLAG_COLD  0x01    /* Normal Power-On: Boot from FLASH  */
-#define BOOTFLAG_WARM  0x02    /* Software reboot           */
+#define CONFIG_SYS_MONITOR_BASE    CONFIG_SYS_TEXT_BASE
 
-#define CONFIG_SYS_MONITOR_BASE    TEXT_BASE
 #if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
 #   define CONFIG_SYS_RAMBOOT
 #endif
@@ -534,11 +539,11 @@
 #define CONFIG_EXTRA_ENV_SETTINGS \
        "netdev=" MK_STR(CONFIG_NETDEV) "\0"                            \
        "tftpflash=tftpboot $loadaddr $uboot; "                         \
-               "protect off " MK_STR(TEXT_BASE) " +$filesize; "        \
-               "erase " MK_STR(TEXT_BASE) " +$filesize; "              \
-               "cp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize; "      \
-               "protect on " MK_STR(TEXT_BASE) " +$filesize; "         \
-               "cmp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize\0"     \
+               "protect off " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; "     \
+               "erase " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; "           \
+               "cp.b $loadaddr " MK_STR(CONFIG_SYS_TEXT_BASE) " $filesize; "   \
+               "protect on " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; "              \
+               "cmp.b $loadaddr " MK_STR(CONFIG_SYS_TEXT_BASE) " $filesize\0"  \
        "fdtaddr=400000\0"                                              \
        "console=ttyCPM0\0"                                             \
        "setbootargs=setenv bootargs "                                  \