/* High Level Configuration Options */
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"sdram_type=SDRAM\0" \
"flash_type=AM29LV160DB\0" \
"loadaddr=0x400000\0" \
"${ofl_args}; " \
"bootm ${loadaddr} - 0xf00000\0"
-#define CONFIG_IPADDR 192.168.0.3
-#define CONFIG_SERVERIP 192.168.0.1
-#define CONFIG_NETMASK 255.0.0.0
-
-#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
-
/* Miscellaneous configurable options */
-#define CONFIG_SYS_MEMTEST_START 0x00002000
-#define CONFIG_SYS_MEMTEST_END 0x00800000
-
-#define CONFIG_SYS_LOAD_ADDR 0x200000
-
-#define CONFIG_SYS_HZ 1000
-
/* Definitions for initial stack pointer and data area (in DPRAM) */
-#define CONFIG_SYS_INIT_RAM_ADDR (CONFIG_SYS_IMMR + 0x2800)
-#define CONFIG_SYS_INIT_RAM_SIZE (0x2e00 - 0x2800)
+#define CFG_SYS_INIT_RAM_ADDR (CONFIG_SYS_IMMR + 0x2800)
+#define CFG_SYS_INIT_RAM_SIZE (0x2e00 - 0x2800)
-/* RAM configuration (note that CONFIG_SYS_SDRAM_BASE must be zero) */
-#define CONFIG_SYS_SDRAM_BASE 0x00000000
+/* RAM configuration (note that CFG_SYS_SDRAM_BASE must be zero) */
+#define CFG_SYS_SDRAM_BASE 0x00000000
/* FLASH organization */
-#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_MAX_FLASH_BANKS 1
-#define CONFIG_SYS_MAX_FLASH_SECT 35
-#define CONFIG_SYS_FLASH_ERASE_TOUT 120000
-#define CONFIG_SYS_FLASH_WRITE_TOUT 500
+#define CFG_SYS_FLASH_BASE CONFIG_TEXT_BASE
/*
* For booting Linux, the board info and command line data
* have to be in the first 8 MB of memory, since this is
* the maximum mapped by the Linux kernel during initialization.
*/
-#define CONFIG_SYS_BOOTMAPSZ (8 << 20)
-#define CONFIG_SYS_MONITOR_LEN (320 << 10)
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_MALLOC_LEN (4096 << 10)
+#define CFG_SYS_BOOTMAPSZ (8 << 20)
/* Environment Configuration */
/* environment is in FLASH */
-#define CONFIG_ENV_SECT_SIZE 0x2000
-#define CONFIG_ENV_OFFSET 0x4000
-#define CONFIG_ENV_OVERWRITE 1
/* Ethernet configuration part */
-#define CONFIG_SYS_DISCOVER_PHY 1
-#define CONFIG_MII_INIT 1
/* NAND configuration part */
-#define CONFIG_SYS_MAX_NAND_DEVICE 1
-#define CONFIG_SYS_NAND_MAX_CHIPS 1
-#define CONFIG_SYS_NAND_BASE 0x0C000000
+#define CFG_SYS_NAND_BASE 0x0C000000
#endif /* __CONFIG_H */