global: Move remaining CONFIG_SYS_NAND_* to CFG_SYS_NAND_*

[platform/kernel/u-boot.git] / include / configs / M5373EVB.h

diff --git a/include/configs/M5373EVB.h b/include/configs/M5373EVB.h
index 7a9240a..f7c09a2 100644 (file)
--- a/include/configs/M5373EVB.h
+++ b/include/configs/M5373EVB.h
@@ -20,45 +20,11 @@
  * (easy to change)
  */
 
-#define CONFIG_MCFUART
 #define CONFIG_SYS_UART_PORT           (0)
 
-#undef CONFIG_WATCHDOG
 #define CONFIG_WATCHDOG_TIMEOUT        3360    /* timeout in ms, max is 3.36 sec */
 
-#define CONFIG_SYS_UNIFY_CACHE
-
-#ifdef CONFIG_MCFFEC
-#      define CONFIG_MII_INIT          1
-#      define CONFIG_SYS_DISCOVER_PHY
-#      define CONFIG_SYS_RX_ETH_BUFFER 8
-#      define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
-/* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */
-#      ifndef CONFIG_SYS_DISCOVER_PHY
-#              define FECDUPLEX        FULL
-#              define FECSPEED         _100BASET
-#      else
-#              ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN
-#                      define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
-#              endif
-#      endif                   /* CONFIG_SYS_DISCOVER_PHY */
-#endif
-
-#define CONFIG_MCFRTC
-#undef RTC_DEBUG
-
-/* Timer */
-#define CONFIG_MCFTMR
-
 /* I2C */
-#define CONFIG_SYS_I2C_LEGACY
-#define CONFIG_SYS_I2C_FSL
-#define CONFIG_SYS_FSL_I2C_SPEED       80000
-#define CONFIG_SYS_FSL_I2C_SLAVE       0x7F
-#define CONFIG_SYS_FSL_I2C_OFFSET      0x58000
-#define CONFIG_SYS_IMMR                CONFIG_SYS_MBAR
-
-#define CONFIG_UDP_CHECKSUM
 
 #ifdef CONFIG_MCFFEC
 #      define CONFIG_IPADDR    192.162.1.2
@@ -82,8 +48,6 @@
 
 #define CONFIG_PRAM            512     /* 512 KB */
 
-#define CONFIG_SYS_LOAD_ADDR           0x40010000
-
 #define CONFIG_SYS_CLK                 80000000
 #define CONFIG_SYS_CPU_CLK             CONFIG_SYS_CLK * 3
 
@@ -102,8 +66,6 @@
 #define CONFIG_SYS_INIT_RAM_ADDR       0x80000000
 #define CONFIG_SYS_INIT_RAM_SIZE       0x8000  /* Size of used area in internal SRAM */
 #define CONFIG_SYS_INIT_RAM_CTRL       0x221
-#define CONFIG_SYS_GBL_DATA_OFFSET     ((CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) - 0x10)
-#define CONFIG_SYS_INIT_SP_OFFSET      CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
@@ -118,41 +80,23 @@
 #define CONFIG_SYS_SDRAM_EMOD          0x40010000
 #define CONFIG_SYS_SDRAM_MODE          0x018D0000
 
-#define CONFIG_SYS_MONITOR_BASE        (CONFIG_SYS_FLASH_BASE + 0x400)
-#define CONFIG_SYS_MONITOR_LEN         (256 << 10)     /* Reserve 256 kB for Monitor */
-
-#define CONFIG_SYS_BOOTPARAMS_LEN      64*1024
-#define CONFIG_SYS_MALLOC_LEN          (128 << 10)     /* Reserve 128 kB for malloc() */
-
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization ??
  */
 #define CONFIG_SYS_BOOTMAPSZ           (CONFIG_SYS_SDRAM_BASE + (CONFIG_SYS_SDRAM_SIZE << 20))
-#define CONFIG_SYS_BOOTM_LEN           (CONFIG_SYS_SDRAM_SIZE << 20)
 
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
 #ifdef CONFIG_SYS_FLASH_CFI
 #      define CONFIG_SYS_FLASH_SIZE            0x800000        /* Max size that the board might have */
-#      define CONFIG_SYS_FLASH_CFI_WIDTH       FLASH_CFI_16BIT
-#      define CONFIG_SYS_MAX_FLASH_BANKS       1       /* max number of memory banks */
-#      define CONFIG_SYS_MAX_FLASH_SECT        137     /* max number of sectors on one chip */
 #endif
 
-#ifdef CONFIG_NANDFLASH_SIZE
-#      define CONFIG_SYS_MAX_NAND_DEVICE       1
-#      define CONFIG_SYS_NAND_BASE             CONFIG_SYS_CS2_BASE
-#      define CONFIG_SYS_NAND_SIZE             1
-#      define CONFIG_SYS_NAND_BASE_LIST        { CONFIG_SYS_NAND_BASE }
+#      define CFG_SYS_NAND_BASE                CONFIG_SYS_CS2_BASE
+#      define CFG_SYS_NAND_BASE_LIST   { CFG_SYS_NAND_BASE }
 #      define NAND_ALLOW_ERASE_ALL     1
-#      define CONFIG_JFFS2_NAND        1
-#      define CONFIG_JFFS2_DEV         "nand0"
-#      define CONFIG_JFFS2_PART_SIZE   (CONFIG_SYS_CS2_MASK & ~1)
-#      define CONFIG_JFFS2_PART_OFFSET 0x00000000
-#endif
 
 #define CONFIG_SYS_FLASH_BASE          CONFIG_SYS_CS0_BASE
 
@@ -167,7 +111,6 @@
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CONFIG_SYS_CACHELINE_SIZE      16
 
 #define ICACHE_STATUS                  (CONFIG_SYS_INIT_RAM_ADDR + \
                                         CONFIG_SYS_INIT_RAM_SIZE - 8)
@@ -199,10 +142,8 @@
 #define CONFIG_SYS_CS1_MASK            0x001f0001
 #define CONFIG_SYS_CS1_CTRL            0x002A3780
 
-#ifdef CONFIG_NANDFLASH_SIZE
 #define CONFIG_SYS_CS2_BASE            0x20000000
-#define CONFIG_SYS_CS2_MASK            ((CONFIG_NANDFLASH_SIZE << 20) | 1)
+#define CONFIG_SYS_CS2_MASK            (16 << 20)
 #define CONFIG_SYS_CS2_CTRL            0x00001f60
-#endif
 
 #endif                         /* _M5373EVB_H */