Merge https://source.denx.de/u-boot/custodians/u-boot-usb

[platform/kernel/u-boot.git] / include / configs / M53017EVB.h

diff --git a/include/configs/M53017EVB.h b/include/configs/M53017EVB.h
index 2b3ea7a..4f82389 100644 (file)
--- a/include/configs/M53017EVB.h
+++ b/include/configs/M53017EVB.h
@@ -18,50 +18,19 @@
  * (easy to change)
  */
 
-#define CONFIG_MCFUART
 #define CONFIG_SYS_UART_PORT           (0)
 
-#undef CONFIG_WATCHDOG
 #define CONFIG_WATCHDOG_TIMEOUT                5000
 
-#define CONFIG_SYS_UNIFY_CACHE
-
 #ifdef CONFIG_MCFFEC
-#      define CONFIG_MII_INIT          1
-#      define CONFIG_SYS_DISCOVER_PHY
-#      define CONFIG_SYS_RX_ETH_BUFFER 8
 #      define CONFIG_SYS_TX_ETH_BUFFER 8
 #      define CONFIG_SYS_FEC_BUF_USE_SRAM
-#      define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
-#      define CONFIG_HAS_ETH1
-
-/* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */
-#      ifndef CONFIG_SYS_DISCOVER_PHY
-#              define FECDUPLEX        FULL
-#              define FECSPEED         _100BASET
-#      else
-#              ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN
-#                      define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
-#              endif
-#      endif                   /* CONFIG_SYS_DISCOVER_PHY */
 #endif
 
-#define CONFIG_MCFRTC
-#undef RTC_DEBUG
 #define CONFIG_SYS_RTC_CNT             (0x8000)
 #define CONFIG_SYS_RTC_SETUP           (RTC_OCEN_OSCBYP | RTC_OCEN_CLKEN)
 
-/* Timer */
-#define CONFIG_MCFTMR
-
 /* I2C */
-#define CONFIG_SYS_I2C_FSL
-#define CONFIG_SYS_FSL_I2C_SPEED       80000
-#define CONFIG_SYS_FSL_I2C_SLAVE       0x7F
-#define CONFIG_SYS_FSL_I2C_OFFSET      0x58000
-#define CONFIG_SYS_IMMR                        CONFIG_SYS_MBAR
-
-#define CONFIG_UDP_CHECKSUM
 
 #ifdef CONFIG_MCFFEC
 #      define CONFIG_IPADDR    192.162.1.2
@@ -85,8 +54,6 @@
 
 #define CONFIG_PRAM            512     /* 512 KB */
 
-#define CONFIG_SYS_LOAD_ADDR   0x40010000
-
 #define CONFIG_SYS_CLK         80000000
 #define CONFIG_SYS_CPU_CLK     CONFIG_SYS_CLK * 3
 
@@ -103,8 +70,6 @@
 #define CONFIG_SYS_INIT_RAM_ADDR       0x80000000
 #define CONFIG_SYS_INIT_RAM_SIZE               0x20000 /* Size of used area in internal SRAM */
 #define CONFIG_SYS_INIT_RAM_CTRL       0x221
-#define CONFIG_SYS_GBL_DATA_OFFSET     ((CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) - 0x10)
-#define CONFIG_SYS_INIT_SP_OFFSET      CONFIG_SYS_GBL_DATA_OFFSET
 
 /*
  * Start addresses for the final memory configuration
@@ -119,19 +84,14 @@
 #define CONFIG_SYS_SDRAM_EMOD          0x80010000
 #define CONFIG_SYS_SDRAM_MODE          0x00CD0000
 
-#define CONFIG_SYS_MONITOR_BASE                (CONFIG_SYS_FLASH_BASE + 0x400)
 #define CONFIG_SYS_MONITOR_LEN         (256 << 10)     /* Reserve 256 kB for Monitor */
 
-#define CONFIG_SYS_BOOTPARAMS_LEN      64*1024
-#define CONFIG_SYS_MALLOC_LEN          (128 << 10)     /* Reserve 128 kB for malloc() */
-
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization ??
  */
 #define CONFIG_SYS_BOOTMAPSZ           (CONFIG_SYS_SDRAM_BASE + (CONFIG_SYS_SDRAM_SIZE << 20))
-#define CONFIG_SYS_BOOTM_LEN           (CONFIG_SYS_SDRAM_SIZE << 20)
 
 /*-----------------------------------------------------------------------
  * FLASH organization
@@ -139,9 +99,6 @@
 #ifdef CONFIG_SYS_FLASH_CFI
 #      define CONFIG_FLASH_SPANSION_S29WS_N    1
 #      define CONFIG_SYS_FLASH_SIZE            0x1000000       /* Max size that the board might have */
-#      define CONFIG_SYS_FLASH_CFI_WIDTH       FLASH_CFI_16BIT
-#      define CONFIG_SYS_MAX_FLASH_BANKS       1       /* max number of memory banks */
-#      define CONFIG_SYS_MAX_FLASH_SECT        137     /* max number of sectors on one chip */
 #endif
 
 #define CONFIG_SYS_FLASH_BASE          CONFIG_SYS_CS0_BASE
@@ -157,7 +114,6 @@
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CONFIG_SYS_CACHELINE_SIZE      16
 
 #define ICACHE_STATUS                  (CONFIG_SYS_INIT_RAM_ADDR + \
                                         CONFIG_SYS_INIT_RAM_SIZE - 8)