m68k: Stop using CONFIG_SYS_GBL_DATA_OFFSET

[platform/kernel/u-boot.git] / include / configs / M5282EVB.h

diff --git a/include/configs/M5282EVB.h b/include/configs/M5282EVB.h
index dfaa847..d4a429c 100644 (file)
--- a/include/configs/M5282EVB.h
+++ b/include/configs/M5282EVB.h
@@ -16,9 +16,7 @@
  * High Level Configuration Options
  * (easy to change)
  */
-#define CONFIG_MCFTMR
 
-#define CONFIG_MCFUART
 #define CONFIG_SYS_UART_PORT           (0)
 
 #undef CONFIG_MONITOR_IS_IN_RAM        /* define if monitor is started from a pre-loader */
@@ -31,33 +29,12 @@
        . = DEFINED(env_offset) ? env_offset : .; \
        env/embedded.o(.text*);
 
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-
-/*
- * Command line configuration.
- */
-
-#define CONFIG_MCFFEC
 #ifdef CONFIG_MCFFEC
-#      define CONFIG_MII_INIT          1
 #      define CONFIG_SYS_DISCOVER_PHY
-#      define CONFIG_SYS_RX_ETH_BUFFER 8
-#      define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
-
-#      define CONFIG_SYS_FEC0_PINMUX           0
-#      define CONFIG_SYS_FEC0_MIIBASE          CONFIG_SYS_FEC0_IOBASE
-#      define MCFFEC_TOUT_LOOP         50000
 /* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */
 #      ifndef CONFIG_SYS_DISCOVER_PHY
 #              define FECDUPLEX        FULL
 #              define FECSPEED         _100BASET
-#      else
-#              ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN
-#                      define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
-#              endif
 #      endif                   /* CONFIG_SYS_DISCOVER_PHY */
 #endif
 
@@ -81,11 +58,6 @@
        "save\0"                                \
        ""
 
-#define CONFIG_SYS_LOAD_ADDR           0x20000
-
-#define CONFIG_SYS_MEMTEST_START       0x400
-#define CONFIG_SYS_MEMTEST_END         0x380000
-
 #define        CONFIG_SYS_CLK                  64000000
 
 /* PLL Configuration: Ext Clock * 6 (see table 9-4 of MCF user manual) */
@@ -105,8 +77,7 @@
  */
 #define CONFIG_SYS_INIT_RAM_ADDR       0x20000000
 #define CONFIG_SYS_INIT_RAM_SIZE       0x10000 /* Size of used area in internal SRAM    */
-#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET      CONFIG_SYS_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_SP_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
@@ -119,17 +90,7 @@
 #define        CONFIG_SYS_INT_FLASH_BASE       0xf0000000
 #define CONFIG_SYS_INT_FLASH_ENABLE    0x21
 
-/* If M5282 port is fully implemented the monitor base will be behind
- * the vector table. */
-#if (CONFIG_SYS_TEXT_BASE != CONFIG_SYS_INT_FLASH_BASE)
-#define CONFIG_SYS_MONITOR_BASE        (CONFIG_SYS_FLASH_BASE + 0x400)
-#else
-#define CONFIG_SYS_MONITOR_BASE        (CONFIG_SYS_TEXT_BASE + 0x418)  /* 24 Byte for CFM-Config */
-#endif
-
 #define CONFIG_SYS_MONITOR_LEN         0x20000
-#define CONFIG_SYS_MALLOC_LEN          (256 << 10)
-#define CONFIG_SYS_BOOTPARAMS_LEN      64*1024
 
 /*
  * For booting Linux, the board info and command line data
@@ -144,8 +105,6 @@
 #ifdef CONFIG_SYS_FLASH_CFI
 
 #      define CONFIG_SYS_FLASH_SIZE            0x1000000       /* Max size that the board might have */
-#      define CONFIG_SYS_FLASH_CFI_WIDTH       FLASH_CFI_16BIT
-#      define CONFIG_SYS_MAX_FLASH_BANKS       1       /* max number of memory banks */
 #      define CONFIG_SYS_MAX_FLASH_SECT        137     /* max number of sectors on one chip */
 #      define CONFIG_SYS_FLASH_CHECKSUM
 #      define CONFIG_SYS_FLASH_BANKS_LIST      { CONFIG_SYS_FLASH_BASE }
@@ -154,7 +113,6 @@
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CONFIG_SYS_CACHELINE_SIZE      16
 
 #define ICACHE_STATUS                  (CONFIG_SYS_INIT_RAM_ADDR + \
                                         CONFIG_SYS_INIT_RAM_SIZE - 8)