i2c: Move PPC4xx I2C driver into drivers/i2c directory

[platform/kernel/u-boot.git] / include / configs / M5275EVB.h

diff --git a/include/configs/M5275EVB.h b/include/configs/M5275EVB.h
index 1f3539e..981670a 100644 (file)
--- a/include/configs/M5275EVB.h
+++ b/include/configs/M5275EVB.h
@@ -55,7 +55,6 @@
 #define CONFIG_ENV_OFFSET              0x4000
 #define CONFIG_ENV_SECT_SIZE   0x2000
 #define CONFIG_ENV_IS_IN_FLASH 1
-#define CONFIG_ENV_IS_EMBEDDED 1
 #else
 #define CONFIG_ENV_ADDR                0xffe04000
 #define CONFIG_ENV_SECT_SIZE   0x2000
@@ -73,6 +72,7 @@
 /* Available command configuration */
 #include <config_cmd_default.h>
 
+#define CONFIG_CMD_CACHE
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_MII
 #define CONFIG_CMD_NET
@@ -122,11 +122,6 @@
 #define CONFIG_SYS_I2C_PINMUX_CLR      (0xFFF0)
 #define CONFIG_SYS_I2C_PINMUX_SET      (0x000F)
 
-#ifdef CONFIG_MCFFEC
-#define CONFIG_ETHADDR         00:06:3b:01:41:55
-#define CONFIG_ETH1ADDR                00:0e:0c:bc:e5:60
-#endif
-
 #define CONFIG_SYS_PROMPT              "-> "
 #define CONFIG_SYS_LONGHELP            /* undef to save memory */
 
@@ -146,6 +141,23 @@
 #define CONFIG_SYS_MEMTEST_START       0x400
 #define CONFIG_SYS_MEMTEST_END         0x380000
 
+#ifdef CONFIG_MCFFEC
+#      define CONFIG_NET_RETRY_COUNT   5
+#      define CONFIG_OVERWRITE_ETHADDR_ONCE
+#endif                         /* FEC_ENET */
+
+#define CONFIG_EXTRA_ENV_SETTINGS              \
+       "netdev=eth0\0"                         \
+       "loadaddr=10000\0"                      \
+       "uboot=u-boot.bin\0"                    \
+       "load=tftp ${loadaddr} ${uboot}\0"      \
+       "upd=run load; run prog\0"              \
+       "prog=prot off ffe00000 ffe3ffff;"      \
+       "era ffe00000 ffe3ffff;"                \
+       "cp.b ${loadaddr} ffe00000 ${filesize};"\
+       "save\0"                                \
+       ""
+
 #define CONFIG_SYS_HZ                  1000
 #define CONFIG_SYS_CLK                 150000000
 
@@ -173,7 +185,7 @@
  */
 #define CONFIG_SYS_SDRAM_BASE          0x00000000
 #define CONFIG_SYS_SDRAM_SIZE          16      /* SDRAM size in MB */
-#define CONFIG_SYS_FLASH_BASE          0xffe00000
+#define CONFIG_SYS_FLASH_BASE          CONFIG_SYS_CS0_BASE
 
 #ifdef CONFIG_MONITOR_IS_IN_RAM
 #define CONFIG_SYS_MONITOR_BASE        0x20000
@@ -190,7 +202,8 @@
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization ??
  */
-#define CONFIG_SYS_BOOTMAPSZ           (8 << 20)       /* Initial mmap for Linux */
+#define CONFIG_SYS_BOOTMAPSZ           (CONFIG_SYS_SDRAM_BASE + (CONFIG_SYS_SDRAM_SIZE << 20))
+#define CONFIG_SYS_BOOTM_LEN           (CONFIG_SYS_SDRAM_SIZE << 20)
 
 /*-----------------------------------------------------------------------
  * FLASH organization
@@ -208,16 +221,29 @@
  */
 #define CONFIG_SYS_CACHELINE_SIZE      16
 
+#define ICACHE_STATUS                  (CONFIG_SYS_INIT_RAM_ADDR + \
+                                        CONFIG_SYS_INIT_RAM_END - 8)
+#define DCACHE_STATUS                  (CONFIG_SYS_INIT_RAM_ADDR + \
+                                        CONFIG_SYS_INIT_RAM_END - 4)
+#define CONFIG_SYS_ICACHE_INV          (CF_CACR_CINV | CF_CACR_INVI)
+#define CONFIG_SYS_CACHE_ACR0          (CONFIG_SYS_SDRAM_BASE | \
+                                        CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \
+                                        CF_ACR_EN | CF_ACR_SM_ALL)
+#define CONFIG_SYS_CACHE_ICACR         (CF_CACR_CENB | CF_CACR_CINV | \
+                                        CF_CACR_DISD | CF_CACR_INVI | \
+                                        CF_CACR_CEIB | CF_CACR_DCM | \
+                                        CF_CACR_EUSP)
+
 /*-----------------------------------------------------------------------
  * Memory bank definitions
  */
-#define CONFIG_SYS_AR0_PRELIM          (CONFIG_SYS_FLASH_BASE >> 16)
-#define CONFIG_SYS_CR0_PRELIM          0x1980
-#define CONFIG_SYS_MR0_PRELIM          0x001F0001
+#define CONFIG_SYS_CS0_BASE            0xffe00000
+#define CONFIG_SYS_CS0_CTRL            0x00001980
+#define CONFIG_SYS_CS0_MASK            0x001F0001
 
-#define CONFIG_SYS_AR1_PRELIM          0x3000
-#define CONFIG_SYS_CR1_PRELIM          0x1900
-#define CONFIG_SYS_MR1_PRELIM          0x00070001
+#define CONFIG_SYS_CS1_BASE            0x30000000
+#define CONFIG_SYS_CS1_CTRL            0x00001900
+#define CONFIG_SYS_CS1_MASK            0x00070001
 
 /*-----------------------------------------------------------------------
  * Port configuration