configs: Remove a number of unreferenced CONFIG options.

[platform/kernel/u-boot.git] / include / configs / M5275EVB.h

diff --git a/include/configs/M5275EVB.h b/include/configs/M5275EVB.h
index 3504861..35ff267 100644 (file)
--- a/include/configs/M5275EVB.h
+++ b/include/configs/M5275EVB.h
@@ -21,9 +21,6 @@
  * (easy to change)
  */
 
-#define CONFIG_MCFTMR
-
-#define CONFIG_MCFUART
 #define CONFIG_SYS_UART_PORT           (0)
 
 /* Configuration for environment
@@ -34,40 +31,14 @@
        . = DEFINED(env_offset) ? env_offset : .; \
        env/embedded.o(.text);
 
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-
 /* Available command configuration */
 
-#ifdef CONFIG_MCFFEC
-#define CONFIG_MII_INIT                1
-#define CONFIG_SYS_DISCOVER_PHY
-#define CONFIG_SYS_RX_ETH_BUFFER       8
-#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
-#define CONFIG_HAS_ETH1
-/* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */
-#ifndef CONFIG_SYS_DISCOVER_PHY
-#define FECDUPLEX              FULL
-#define FECSPEED               _100BASET
-#else
-#ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN
-#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
-#endif
-#endif
-#endif
-
 /* I2C */
-#define CONFIG_SYS_IMMR                CONFIG_SYS_MBAR
 #define CONFIG_SYS_I2C_PINMUX_REG      (gpio_reg->par_feci2c)
 #define CONFIG_SYS_I2C_PINMUX_CLR      (0xFFF0)
 #define CONFIG_SYS_I2C_PINMUX_SET      (0x000F)
 
-#define CONFIG_BOOTCOMMAND     "bootm ffe40000"
-
 #ifdef CONFIG_MCFFEC
-#      define CONFIG_NET_RETRY_COUNT   5
 #      define CONFIG_OVERWRITE_ETHADDR_ONCE
 #endif                         /* FEC_ENET */
 
@@ -98,8 +69,6 @@
  */
 #define CONFIG_SYS_INIT_RAM_ADDR       0x20000000
 #define CONFIG_SYS_INIT_RAM_SIZE       0x10000 /* Size of used area in internal SRAM */
-#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET      CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
@@ -110,14 +79,7 @@
 #define CONFIG_SYS_SDRAM_SIZE          16      /* SDRAM size in MB */
 #define CONFIG_SYS_FLASH_BASE          CONFIG_SYS_CS0_BASE
 
-#ifdef CONFIG_MONITOR_IS_IN_RAM
-#define CONFIG_SYS_MONITOR_BASE        0x20000
-#else
-#define CONFIG_SYS_MONITOR_BASE        (CONFIG_SYS_FLASH_BASE + 0x400)
-#endif
-
 #define CONFIG_SYS_MONITOR_LEN         0x20000
-#define CONFIG_SYS_BOOTPARAMS_LEN      64*1024
 
 /*
  * For booting Linux, the board info and command line data
@@ -125,14 +87,10 @@
  * the maximum mapped by the Linux kernel during initialization ??
  */
 #define CONFIG_SYS_BOOTMAPSZ           (CONFIG_SYS_SDRAM_BASE + (CONFIG_SYS_SDRAM_SIZE << 20))
-#define CONFIG_SYS_BOOTM_LEN           (CONFIG_SYS_SDRAM_SIZE << 20)
 
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CONFIG_SYS_MAX_FLASH_BANKS     1       /* max number of memory banks */
-#define CONFIG_SYS_MAX_FLASH_SECT      11      /* max number of sectors on one chip */
-#define CONFIG_SYS_FLASH_ERASE_TOUT    1000
 
 #define CONFIG_SYS_FLASH_SIZE          0x200000
 
@@ -164,9 +122,4 @@
 #define CONFIG_SYS_CS1_CTRL            0x00001900
 #define CONFIG_SYS_CS1_MASK            0x00070001
 
-/*-----------------------------------------------------------------------
- * Port configuration
- */
-#define CONFIG_SYS_FECI2C              0x0FA0
-
 #endif /* _M5275EVB_H */