Merge https://source.denx.de/u-boot/custodians/u-boot-usb

[platform/kernel/u-boot.git] / include / configs / M5272C3.h

diff --git a/include/configs/M5272C3.h b/include/configs/M5272C3.h
index 5056629..356ad3e 100644 (file)
--- a/include/configs/M5272C3.h
+++ b/include/configs/M5272C3.h
@@ -16,12 +16,9 @@
  * High Level Configuration Options
  * (easy to change)
  */
-#define CONFIG_MCFTMR
 
-#define CONFIG_MCFUART
 #define CONFIG_SYS_UART_PORT           (0)
 
-#undef CONFIG_WATCHDOG
 #define CONFIG_WATCHDOG_TIMEOUT 10000  /* timeout in milliseconds */
 
 #undef CONFIG_MONITOR_IS_IN_RAM        /* define if monitor is started from a pre-loader */
@@ -34,30 +31,6 @@
        . = DEFINED(env_offset) ? env_offset : .; \
        env/embedded.o(.text);
 
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-
-/*
- * Command line configuration.
- */
-#ifdef CONFIG_MCFFEC
-#      define CONFIG_MII_INIT          1
-#      define CONFIG_SYS_DISCOVER_PHY
-#      define CONFIG_SYS_RX_ETH_BUFFER 8
-#      define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
-/* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */
-#      ifndef CONFIG_SYS_DISCOVER_PHY
-#              define FECDUPLEX        FULL
-#              define FECSPEED         _100BASET
-#      else
-#              ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN
-#                      define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
-#              endif
-#      endif                   /* CONFIG_SYS_DISCOVER_PHY */
-#endif
-
 #ifdef CONFIG_MCFFEC
 #      define CONFIG_IPADDR    192.162.1.2
 #      define CONFIG_NETMASK   255.255.255.0
@@ -78,7 +51,6 @@
        "save\0"                                \
        ""
 
-#define CONFIG_SYS_LOAD_ADDR           0x20000
 #define CONFIG_SYS_CLK                 66000000
 
 /*
@@ -95,8 +67,6 @@
  */
 #define CONFIG_SYS_INIT_RAM_ADDR       0x20000000
 #define CONFIG_SYS_INIT_RAM_SIZE       0x1000  /* Size of used area in internal SRAM    */
-#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET      CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
@@ -107,15 +77,7 @@
 #define CONFIG_SYS_SDRAM_SIZE          4       /* SDRAM size in MB */
 #define CONFIG_SYS_FLASH_BASE          0xffe00000
 
-#ifdef CONFIG_MONITOR_IS_IN_RAM
-#define CONFIG_SYS_MONITOR_BASE        0x20000
-#else
-#define CONFIG_SYS_MONITOR_BASE        (CONFIG_SYS_FLASH_BASE + 0x400)
-#endif
-
 #define CONFIG_SYS_MONITOR_LEN         0x20000
-#define CONFIG_SYS_MALLOC_LEN          (256 << 10)
-#define CONFIG_SYS_BOOTPARAMS_LEN      64*1024
 
 /*
  * For booting Linux, the board info and command line data
@@ -129,15 +91,11 @@
  */
 #ifdef CONFIG_SYS_FLASH_CFI
 #      define CONFIG_SYS_FLASH_SIZE            0x800000        /* Max size that the board might have */
-#      define CONFIG_SYS_FLASH_CFI_WIDTH       FLASH_CFI_16BIT
-#      define CONFIG_SYS_MAX_FLASH_BANKS       1       /* max number of memory banks */
-#      define CONFIG_SYS_MAX_FLASH_SECT        137     /* max number of sectors on one chip */
 #endif
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CONFIG_SYS_CACHELINE_SIZE      16
 
 #define ICACHE_STATUS                  (CONFIG_SYS_INIT_RAM_ADDR + \
                                         CONFIG_SYS_INIT_RAM_SIZE - 8)
@@ -153,26 +111,6 @@
                                         CF_CACR_EUSP)
 
 /*-----------------------------------------------------------------------
- * Memory bank definitions
- */
-#define CONFIG_SYS_BR0_PRELIM          0xFFE00201
-#define CONFIG_SYS_OR0_PRELIM          0xFFE00014
-#define CONFIG_SYS_BR1_PRELIM          0
-#define CONFIG_SYS_OR1_PRELIM          0
-#define CONFIG_SYS_BR2_PRELIM          0x30000001
-#define CONFIG_SYS_OR2_PRELIM          0xFFF80000
-#define CONFIG_SYS_BR3_PRELIM          0
-#define CONFIG_SYS_OR3_PRELIM          0
-#define CONFIG_SYS_BR4_PRELIM          0
-#define CONFIG_SYS_OR4_PRELIM          0
-#define CONFIG_SYS_BR5_PRELIM          0
-#define CONFIG_SYS_OR5_PRELIM          0
-#define CONFIG_SYS_BR6_PRELIM          0
-#define CONFIG_SYS_OR6_PRELIM          0
-#define CONFIG_SYS_BR7_PRELIM          0x00000701
-#define CONFIG_SYS_OR7_PRELIM          0xFFC0007C
-
-/*-----------------------------------------------------------------------
  * Port configuration
  */
 #define CONFIG_SYS_PACNT               0x00000000