-TABILITY or FITNESS FO04-2007 Freescale Semiconductor, Inc.
+/* SPDX-License-Identifier: GPL-2.0+ */
+/* Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
* Hayden Fraser (Hayden.Fraser@freescale.com)
- *
- * SPDX-License-Identifier: GPL-2.0+
*/
#ifndef _M5253DEMO_H
#define _M5253DEMO_H
-#define CONFIG_MCF52x2 /* define processor family */
-#define CONFIG_M5253 /* define processor type */
-#define CONFIG_M5253DEMO /* define board type */
+#include <linux/stringify.h>
-#define CONFIG_MCFTMR
+#define CFG_SYS_UART_PORT (0)
-#define CONFIG_MCFUART
-#define CONFIG_SYS_UART_PORT (0)
-#define CONFIG_BAUDRATE 115200
-
-#undef CONFIG_WATCHDOG /* disable watchdog */
-
-#define CONFIG_BOOTDELAY 5
/* Configuration for environment
* Environment is embedded in u-boot in the second sector of the flash
*/
-#ifdef CONFIG_MONITOR_IS_IN_RAM
-# define CONFIG_ENV_OFFSET 0x4000
-# define CONFIG_ENV_SECT_SIZE 0x1000
-# define CONFIG_ENV_IS_IN_FLASH 1
-#else
-# define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x4000)
-# define CONFIG_ENV_SECT_SIZE 0x1000
-# define CONFIG_ENV_IS_IN_FLASH 1
-#endif
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_CACHE
-#define CONFIG_CMD_LOADB
-#define CONFIG_CMD_LOADS
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_IDE
-#define CONFIG_CMD_MEMORY
-#define CONFIG_CMD_MISC
-#define CONFIG_CMD_PING
-
-#ifdef CONFIG_CMD_IDE
-/* ATA */
-# define CONFIG_DOS_PARTITION
-# define CONFIG_MAC_PARTITION
-# define CONFIG_IDE_RESET 1
-# define CONFIG_IDE_PREINIT 1
-# define CONFIG_ATAPI
-# undef CONFIG_LBA48
-
-# define CONFIG_SYS_IDE_MAXBUS 1
-# define CONFIG_SYS_IDE_MAXDEVICE 2
-
-# define CONFIG_SYS_ATA_BASE_ADDR (CONFIG_SYS_MBAR2 + 0x800)
-# define CONFIG_SYS_ATA_IDE0_OFFSET 0
-
-# define CONFIG_SYS_ATA_DATA_OFFSET 0xA0 /* Offset for data I/O */
-# define CONFIG_SYS_ATA_REG_OFFSET 0xA0 /* Offset for normal register accesses */
-# define CONFIG_SYS_ATA_ALT_OFFSET 0xC0 /* Offset for alternate registers */
-# define CONFIG_SYS_ATA_STRIDE 4 /* Interval between registers */
-#endif
+#define LDS_BOARD_TEXT \
+ . = DEFINED(env_offset) ? env_offset : .; \
+ env/embedded.o(.text*);
-#define CONFIG_DRIVER_DM9000
#ifdef CONFIG_DRIVER_DM9000
-# define CONFIG_DM9000_BASE (CONFIG_SYS_CS1_BASE | 0x300)
-# define DM9000_IO CONFIG_DM9000_BASE
-# define DM9000_DATA (CONFIG_DM9000_BASE + 4)
-# undef CONFIG_DM9000_DEBUG
-# define CONFIG_DM9000_BYTE_SWAPPED
-
-# define CONFIG_OVERWRITE_ETHADDR_ONCE
-
-# define CONFIG_EXTRA_ENV_SETTINGS \
+# define CFG_EXTRA_ENV_SETTINGS \
"netdev=eth0\0" \
"inpclk=" __stringify(CONFIG_SYS_INPUT_CLKSRC) "\0" \
"loadaddr=10000\0" \
""
#endif
-#define CONFIG_HOSTNAME M5253DEMO
-
/* I2C */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_FSL
-#define CONFIG_SYS_FSL_I2C_SPEED 80000
-#define CONFIG_SYS_FSL_I2C_SLAVE 0x7F
-#define CONFIG_SYS_FSL_I2C_OFFSET 0x00000280
-#define CONFIG_SYS_IMMR CONFIG_SYS_MBAR
-#define CONFIG_SYS_I2C_PINMUX_REG (*(u32 *) (CONFIG_SYS_MBAR+0x19C))
-#define CONFIG_SYS_I2C_PINMUX_CLR (0xFFFFE7FF)
-#define CONFIG_SYS_I2C_PINMUX_SET (0)
-
-#define CONFIG_SYS_PROMPT "=> "
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-
-#if defined(CONFIG_CMD_KGDB)
-# define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
+#define CFG_SYS_I2C_PINMUX_REG (*(u32 *) (CFG_SYS_MBAR+0x19C))
+#define CFG_SYS_I2C_PINMUX_CLR (0xFFFFE7FF)
+#define CFG_SYS_I2C_PINMUX_SET (0)
+
+#undef CFG_SYS_PLL_BYPASS /* bypass PLL for test purpose */
+#define CFG_SYS_FAST_CLK
+#ifdef CFG_SYS_FAST_CLK
+# define CFG_SYS_PLLCR 0x1243E054
+# define CFG_SYS_CLK 140000000
#else
-# define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
-#define CONFIG_SYS_LOAD_ADDR 0x00100000
-
-#define CONFIG_SYS_MEMTEST_START 0x400
-#define CONFIG_SYS_MEMTEST_END 0x380000
-
-#define CONFIG_SYS_HZ 1000
-
-#undef CONFIG_SYS_PLL_BYPASS /* bypass PLL for test purpose */
-#define CONFIG_SYS_FAST_CLK
-#ifdef CONFIG_SYS_FAST_CLK
-# define CONFIG_SYS_PLLCR 0x1243E054
-# define CONFIG_SYS_CLK 140000000
-#else
-# define CONFIG_SYS_PLLCR 0x135a4140
-# define CONFIG_SYS_CLK 70000000
+# define CFG_SYS_PLLCR 0x135a4140
+# define CFG_SYS_CLK 70000000
#endif
/*
* You should know what you are doing if you make changes here.
*/
-#define CONFIG_SYS_MBAR 0x10000000 /* Register Base Addrs */
-#define CONFIG_SYS_MBAR2 0x80000000 /* Module Base Addrs 2 */
+#define CFG_SYS_MBAR 0x10000000 /* Register Base Addrs */
+#define CFG_SYS_MBAR2 0x80000000 /* Module Base Addrs 2 */
/*
* Definitions for initial stack pointer and data area (in DPRAM)
*/
-#define CONFIG_SYS_INIT_RAM_ADDR 0x20000000
-#define CONFIG_SYS_INIT_RAM_SIZE 0x10000 /* Size of used area in internal SRAM */
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
+#define CFG_SYS_INIT_RAM_ADDR 0x20000000
+#define CFG_SYS_INIT_RAM_SIZE 0x10000 /* Size of used area in internal SRAM */
/*
* Start addresses for the final memory configuration
* (Set up by the startup code)
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
+ * Please note that CFG_SYS_SDRAM_BASE _must_ start at 0
*/
-#define CONFIG_SYS_SDRAM_BASE 0x00000000
-#define CONFIG_SYS_SDRAM_SIZE 16 /* SDRAM size in MB */
-
-#ifdef CONFIG_MONITOR_IS_IN_RAM
-# define CONFIG_SYS_MONITOR_BASE 0x20000
-#else
-# define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE + 0x400)
-#endif
-
-#define CONFIG_SYS_MONITOR_LEN 0x40000
-#define CONFIG_SYS_MALLOC_LEN (256 << 10)
-#define CONFIG_SYS_BOOTPARAMS_LEN (64*1024)
+#define CFG_SYS_SDRAM_BASE 0x00000000
+#define CFG_SYS_SDRAM_SIZE 16 /* SDRAM size in MB */
/*
* For booting Linux, the board info and command line data
* have to be in the first 8 MB of memory, since this is
* the maximum mapped by the Linux kernel during initialization ??
*/
-#define CONFIG_SYS_BOOTMAPSZ (CONFIG_SYS_SDRAM_BASE + (CONFIG_SYS_SDRAM_SIZE << 20))
-#define CONFIG_SYS_BOOTM_LEN (CONFIG_SYS_SDRAM_SIZE << 20)
+#define CFG_SYS_BOOTMAPSZ (CFG_SYS_SDRAM_BASE + (CFG_SYS_SDRAM_SIZE << 20))
/* FLASH organization */
-#define CONFIG_SYS_FLASH_BASE (CONFIG_SYS_CS0_BASE)
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
-#define CONFIG_SYS_MAX_FLASH_SECT 2048 /* max number of sectors on one chip */
-#define CONFIG_SYS_FLASH_ERASE_TOUT 1000
+#define CFG_SYS_FLASH_BASE (CFG_SYS_CS0_BASE)
#define FLASH_SST6401B 0x200
#define SST_ID_xF6401B 0x236D236D
-#undef CONFIG_SYS_FLASH_CFI
#ifdef CONFIG_SYS_FLASH_CFI
/*
* Unable to use CFI driver, due to incompatible sector erase command by SST.
* Amd/Atmel use 0x30 for sector erase, SST use 0x50.
* 0x30 is block erase in SST
*/
-# define CONFIG_FLASH_CFI_DRIVER 1
-# define CONFIG_SYS_FLASH_SIZE 0x800000
-# define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
-# define CONFIG_FLASH_CFI_LEGACY
+# define CFG_SYS_FLASH_SIZE 0x800000
#else
-# define CONFIG_SYS_SST_SECT 2048
-# define CONFIG_SYS_SST_SECTSZ 0x1000
-# define CONFIG_SYS_FLASH_WRITE_TOUT 500
+# define CFG_SYS_SST_SECT 2048
+# define CFG_SYS_SST_SECTSZ 0x1000
#endif
/* Cache Configuration */
-#define CONFIG_SYS_CACHELINE_SIZE 16
-
-#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \
- CONFIG_SYS_INIT_RAM_SIZE - 8)
-#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \
- CONFIG_SYS_INIT_RAM_SIZE - 4)
-#define CONFIG_SYS_ICACHE_INV (CF_CACR_DCM)
-#define CONFIG_SYS_CACHE_ACR0 (CONFIG_SYS_FLASH_BASE | \
+
+#define ICACHE_STATUS (CFG_SYS_INIT_RAM_ADDR + \
+ CFG_SYS_INIT_RAM_SIZE - 8)
+#define DCACHE_STATUS (CFG_SYS_INIT_RAM_ADDR + \
+ CFG_SYS_INIT_RAM_SIZE - 4)
+#define CFG_SYS_ICACHE_INV (CF_CACR_DCM)
+#define CFG_SYS_CACHE_ACR0 (CFG_SYS_FLASH_BASE | \
CF_ADDRMASK(8) | \
CF_ACR_EN | CF_ACR_SM_ALL)
-#define CONFIG_SYS_CACHE_ACR1 (CONFIG_SYS_SDRAM_BASE | \
- CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \
+#define CFG_SYS_CACHE_ACR1 (CFG_SYS_SDRAM_BASE | \
+ CF_ADDRMASK(CFG_SYS_SDRAM_SIZE) | \
CF_ACR_EN | CF_ACR_SM_ALL)
-#define CONFIG_SYS_CACHE_ICACR (CF_CACR_CENB | CF_CACR_CEIB | \
+#define CFG_SYS_CACHE_ICACR (CF_CACR_CENB | CF_CACR_CEIB | \
CF_CACR_DBWE)
-/* Port configuration */
-#define CONFIG_SYS_FECI2C 0xF0
+#define CFG_SYS_CS0_BASE 0xFF800000
+#define CFG_SYS_CS0_MASK 0x007F0021
+#define CFG_SYS_CS0_CTRL 0x00001D80
-#define CONFIG_SYS_CS0_BASE 0xFF800000
-#define CONFIG_SYS_CS0_MASK 0x007F0021
-#define CONFIG_SYS_CS0_CTRL 0x00001D80
-
-#define CONFIG_SYS_CS1_BASE 0xE0000000
-#define CONFIG_SYS_CS1_MASK 0x00000001
-#define CONFIG_SYS_CS1_CTRL 0x00003DD8
+#define CFG_SYS_CS1_BASE 0xE0000000
+#define CFG_SYS_CS1_MASK 0x00000001
+#define CFG_SYS_CS1_CTRL 0x00003DD8
/*-----------------------------------------------------------------------
* Port configuration
*/
-#define CONFIG_SYS_GPIO_FUNC 0x00000008 /* Set gpio pins: none */
-#define CONFIG_SYS_GPIO1_FUNC 0x00df00f0 /* 36-39(SWITCH),48-52(FPGAs),54 */
-#define CONFIG_SYS_GPIO_EN 0x00000008 /* Set gpio output enable */
-#define CONFIG_SYS_GPIO1_EN 0x00c70000 /* Set gpio output enable */
-#define CONFIG_SYS_GPIO_OUT 0x00000008 /* Set outputs to default state */
-#define CONFIG_SYS_GPIO1_OUT 0x00c70000 /* Set outputs to default state */
-#define CONFIG_SYS_GPIO1_LED 0x00400000 /* user led */
+#define CFG_SYS_GPIO_FUNC 0x00000008 /* Set gpio pins: none */
+#define CFG_SYS_GPIO1_FUNC 0x00df00f0 /* 36-39(SWITCH),48-52(FPGAs),54 */
+#define CFG_SYS_GPIO_EN 0x00000008 /* Set gpio output enable */
+#define CFG_SYS_GPIO1_EN 0x00c70000 /* Set gpio output enable */
+#define CFG_SYS_GPIO_OUT 0x00000008 /* Set outputs to default state */
+#define CFG_SYS_GPIO1_OUT 0x00c70000 /* Set outputs to default state */
+#define CFG_SYS_GPIO1_LED 0x00400000 /* user led */
+
#endif /* _M5253DEMO_H */