Finish converting CONFIG_SYS_CACHELINE_SIZE to Kconfig

[platform/kernel/u-boot.git] / include / configs / M5249EVB.h

diff --git a/include/configs/M5249EVB.h b/include/configs/M5249EVB.h
index df0733e..2e8bbbb 100644 (file)
--- a/include/configs/M5249EVB.h
+++ b/include/configs/M5249EVB.h
@@ -1,10 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Configuation settings for the esd TASREG board.
  *
  * (C) Copyright 2004
  * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
- *
- * SPDX-License-Identifier:    GPL-2.0+
  */
 
 /*
@@ -31,33 +30,6 @@
  * BOOTP options
  */
 #undef CONFIG_BOOTP_BOOTFILESIZE
-#undef CONFIG_BOOTP_BOOTPATH
-#undef CONFIG_BOOTP_GATEWAY
-#undef CONFIG_BOOTP_HOSTNAME
-
-/*
- * Command line configuration.
- */
-
-#define CONFIG_SYS_LONGHELP                            /* undef to save memory         */
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE              1024            /* Console I/O Buffer Size      */
-#else
-#define CONFIG_SYS_CBSIZE              256             /* Console I/O Buffer Size      */
-#endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS             16              /* max number of command args   */
-#define CONFIG_SYS_BARGSIZE            CONFIG_SYS_CBSIZE       /* Boot Argument Buffer Size    */
-
-#define CONFIG_SYS_DEVICE_NULLDEV      1       /* include nulldev device       */
-#define CONFIG_AUTO_COMPLETE   1       /* add autocompletion support   */
-#define CONFIG_MX_CYCLIC       1       /* enable mdc/mwc commands      */
-
-#define CONFIG_SYS_LOAD_ADDR           0x200000        /* default load address */
-
-#define CONFIG_SYS_MEMTEST_START       0x400
-#define CONFIG_SYS_MEMTEST_END         0x380000
 
 /*
  * Clock configuration: enable only one of the following options
@@ -88,10 +60,6 @@
        . = DEFINED(env_offset) ? env_offset : .; \
        env/embedded.o(.text);
 
-#define CONFIG_ENV_OFFSET              0x4000  /* Address of Environment Sector*/
-#define CONFIG_ENV_SIZE                0x2000  /* Total Size of Environment Sector     */
-#define CONFIG_ENV_SECT_SIZE   0x2000 /* see README - env sector total size    */
-
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
@@ -121,15 +89,12 @@
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CONFIG_SYS_FLASH_CFI
 #ifdef CONFIG_SYS_FLASH_CFI
 
-#      define CONFIG_FLASH_CFI_DRIVER  1
 #      define CONFIG_SYS_FLASH_SIZE            0x1000000       /* Max size that the board might have */
 #      define CONFIG_SYS_FLASH_CFI_WIDTH       FLASH_CFI_16BIT
 #      define CONFIG_SYS_MAX_FLASH_BANKS       1       /* max number of memory banks */
 #      define CONFIG_SYS_MAX_FLASH_SECT        137     /* max number of sectors on one chip */
-#      define CONFIG_SYS_FLASH_PROTECTION      /* "Real" (hardware) sectors protection */
 #      define CONFIG_SYS_FLASH_CHECKSUM
 #      define CONFIG_SYS_FLASH_BANKS_LIST      { CONFIG_SYS_FLASH_BASE }
 #endif
@@ -137,7 +102,6 @@
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CONFIG_SYS_CACHELINE_SIZE      16
 
 #define ICACHE_STATUS                  (CONFIG_SYS_INIT_RAM_ADDR + \
                                         CONFIG_SYS_INIT_RAM_SIZE - 8)