Convert CONFIG_MCFTMR to Kconfig

[platform/kernel/u-boot.git] / include / configs / M5235EVB.h

diff --git a/include/configs/M5235EVB.h b/include/configs/M5235EVB.h
index e507ad9..e2f3367 100644 (file)
--- a/include/configs/M5235EVB.h
+++ b/include/configs/M5235EVB.h
@@ -1,10 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Configuation settings for the Freescale MCF5329 FireEngine board.
  *
  * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
  * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
- *
- * SPDX-License-Identifier:    GPL-2.0+
  */
 
 /*
@@ -19,56 +18,25 @@
  * (easy to change)
  */
 
-#define CONFIG_MCFUART
 #define CONFIG_SYS_UART_PORT           (0)
 
-#undef CONFIG_WATCHDOG
 #define CONFIG_WATCHDOG_TIMEOUT        5000    /* timeout in milliseconds, max timeout is 6.71sec */
 
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-
-#define CONFIG_MCFFEC
 #ifdef CONFIG_MCFFEC
-#      define CONFIG_MII               1
-#      define CONFIG_MII_INIT          1
 #      define CONFIG_SYS_DISCOVER_PHY
-#      define CONFIG_SYS_RX_ETH_BUFFER 8
-#      define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
-
-#      define CONFIG_SYS_FEC0_PINMUX           0
-#      define CONFIG_SYS_FEC0_MIIBASE          CONFIG_SYS_FEC0_IOBASE
-#      define MCFFEC_TOUT_LOOP         50000
 /* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */
 #      ifndef CONFIG_SYS_DISCOVER_PHY
 #              define FECDUPLEX        FULL
 #              define FECSPEED         _100BASET
-#      else
-#              ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN
-#                      define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
-#              endif
 #      endif                   /* CONFIG_SYS_DISCOVER_PHY */
 #endif
 
-/* Timer */
-#define CONFIG_MCFTMR
-#undef CONFIG_MCFPIT
-
 /* I2C */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_i2C_FSL
-#define CONFIG_SYS_FSL_I2C_SPEED       80000
-#define CONFIG_SYS_FSL_I2C_SLAVE       0x7F
-#define CONFIG_SYS_FSL_I2C_OFFSET      0x00000300
-#define CONFIG_SYS_IMMR                CONFIG_SYS_MBAR
 #define CONFIG_SYS_I2C_PINMUX_REG      (gpio->par_qspi)
 #define CONFIG_SYS_I2C_PINMUX_CLR      ~(GPIO_PAR_FECI2C_SCL_MASK | GPIO_PAR_FECI2C_SDA_MASK)
 #define CONFIG_SYS_I2C_PINMUX_SET      (GPIO_PAR_FECI2C_SCL_I2CSCL | GPIO_PAR_FECI2C_SDA_I2CSDA)
 
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#define CONFIG_BOOTFILE                "u-boot.bin"
+/* this must be included AFTER the definition of CONFIG COMMANDS (if any) */
 #ifdef CONFIG_MCFFEC
 #      define CONFIG_IPADDR    192.162.1.2
 #      define CONFIG_NETMASK   255.255.255.0
@@ -91,8 +59,6 @@
 
 #define CONFIG_PRAM            512     /* 512 KB */
 
-#define CONFIG_SYS_LOAD_ADDR           (CONFIG_SYS_SDRAM_BASE+0x20000)
-
 #define CONFIG_SYS_CLK                 75000000
 #define CONFIG_SYS_CPU_CLK             CONFIG_SYS_CLK * 2
 
@@ -120,14 +86,10 @@
 #define CONFIG_SYS_SDRAM_BASE          0x00000000
 #define CONFIG_SYS_SDRAM_SIZE          16      /* SDRAM size in MB */
 
-#define CONFIG_SYS_MEMTEST_START       CONFIG_SYS_SDRAM_BASE + 0x400
-#define CONFIG_SYS_MEMTEST_END         ((CONFIG_SYS_SDRAM_SIZE - 3) << 20)
-
 #define CONFIG_SYS_MONITOR_BASE        (CONFIG_SYS_FLASH_BASE + 0x400)
 #define CONFIG_SYS_MONITOR_LEN         (256 << 10)     /* Reserve 256 kB for Monitor */
 
 #define CONFIG_SYS_BOOTPARAMS_LEN      64*1024
-#define CONFIG_SYS_MALLOC_LEN          (128 << 10)     /* Reserve 128 kB for malloc() */
 
 /*
  * For booting Linux, the board info and command line data
@@ -141,18 +103,14 @@
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CONFIG_SYS_FLASH_CFI
 #ifdef CONFIG_SYS_FLASH_CFI
-#      define CONFIG_FLASH_CFI_DRIVER  1
 #      define CONFIG_SYS_FLASH_SIZE            0x800000        /* Max size that the board might have */
 #ifdef NORFLASH_PS32BIT
 #      define CONFIG_SYS_FLASH_CFI_WIDTH       FLASH_CFI_32BIT
 #else
 #      define CONFIG_SYS_FLASH_CFI_WIDTH       FLASH_CFI_16BIT
 #endif
-#      define CONFIG_SYS_MAX_FLASH_BANKS       1       /* max number of memory banks */
 #      define CONFIG_SYS_MAX_FLASH_SECT        137     /* max number of sectors on one chip */
-#      define CONFIG_SYS_FLASH_PROTECTION      /* "Real" (hardware) sectors protection */
 #endif
 
 #define CONFIG_SYS_FLASH_BASE          (CONFIG_SYS_CS0_BASE)
@@ -165,20 +123,9 @@
        . = DEFINED(env_offset) ? env_offset : .; \
        env/embedded.o(.text);
 
-#ifdef NORFLASH_PS32BIT
-#      define CONFIG_ENV_OFFSET                (0x8000)
-#      define CONFIG_ENV_SIZE          0x4000
-#      define CONFIG_ENV_SECT_SIZE     0x4000
-#else
-#      define CONFIG_ENV_OFFSET                (0x4000)
-#      define CONFIG_ENV_SIZE          0x2000
-#      define CONFIG_ENV_SECT_SIZE     0x2000
-#endif
-
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CONFIG_SYS_CACHELINE_SIZE      16
 
 #define ICACHE_STATUS                  (CONFIG_SYS_INIT_RAM_ADDR + \
                                         CONFIG_SYS_INIT_RAM_SIZE - 8)