Convert CONFIG_MCFTMR to Kconfig

[platform/kernel/u-boot.git] / include / configs / M5235EVB.h

diff --git a/include/configs/M5235EVB.h b/include/configs/M5235EVB.h
index 4ab3d48..e2f3367 100644 (file)
--- a/include/configs/M5235EVB.h
+++ b/include/configs/M5235EVB.h
@@ -18,49 +18,25 @@
  * (easy to change)
  */
 
-#define CONFIG_MCFUART
 #define CONFIG_SYS_UART_PORT           (0)
 
-#undef CONFIG_WATCHDOG
 #define CONFIG_WATCHDOG_TIMEOUT        5000    /* timeout in milliseconds, max timeout is 6.71sec */
 
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-
 #ifdef CONFIG_MCFFEC
-#      define CONFIG_MII_INIT          1
 #      define CONFIG_SYS_DISCOVER_PHY
-#      define CONFIG_SYS_RX_ETH_BUFFER 8
-#      define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
 /* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */
 #      ifndef CONFIG_SYS_DISCOVER_PHY
 #              define FECDUPLEX        FULL
 #              define FECSPEED         _100BASET
-#      else
-#              ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN
-#                      define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
-#              endif
 #      endif                   /* CONFIG_SYS_DISCOVER_PHY */
 #endif
 
-/* Timer */
-#define CONFIG_MCFTMR
-
 /* I2C */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_i2C_FSL
-#define CONFIG_SYS_FSL_I2C_SPEED       80000
-#define CONFIG_SYS_FSL_I2C_SLAVE       0x7F
-#define CONFIG_SYS_FSL_I2C_OFFSET      0x00000300
-#define CONFIG_SYS_IMMR                CONFIG_SYS_MBAR
 #define CONFIG_SYS_I2C_PINMUX_REG      (gpio->par_qspi)
 #define CONFIG_SYS_I2C_PINMUX_CLR      ~(GPIO_PAR_FECI2C_SCL_MASK | GPIO_PAR_FECI2C_SDA_MASK)
 #define CONFIG_SYS_I2C_PINMUX_SET      (GPIO_PAR_FECI2C_SCL_I2CSCL | GPIO_PAR_FECI2C_SDA_I2CSDA)
 
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#define CONFIG_BOOTFILE                "u-boot.bin"
+/* this must be included AFTER the definition of CONFIG COMMANDS (if any) */
 #ifdef CONFIG_MCFFEC
 #      define CONFIG_IPADDR    192.162.1.2
 #      define CONFIG_NETMASK   255.255.255.0
@@ -83,8 +59,6 @@
 
 #define CONFIG_PRAM            512     /* 512 KB */
 
-#define CONFIG_SYS_LOAD_ADDR           (CONFIG_SYS_SDRAM_BASE+0x20000)
-
 #define CONFIG_SYS_CLK                 75000000
 #define CONFIG_SYS_CPU_CLK             CONFIG_SYS_CLK * 2
 
@@ -116,7 +90,6 @@
 #define CONFIG_SYS_MONITOR_LEN         (256 << 10)     /* Reserve 256 kB for Monitor */
 
 #define CONFIG_SYS_BOOTPARAMS_LEN      64*1024
-#define CONFIG_SYS_MALLOC_LEN          (128 << 10)     /* Reserve 128 kB for malloc() */
 
 /*
  * For booting Linux, the board info and command line data
@@ -137,7 +110,6 @@
 #else
 #      define CONFIG_SYS_FLASH_CFI_WIDTH       FLASH_CFI_16BIT
 #endif
-#      define CONFIG_SYS_MAX_FLASH_BANKS       1       /* max number of memory banks */
 #      define CONFIG_SYS_MAX_FLASH_SECT        137     /* max number of sectors on one chip */
 #endif
 
@@ -154,7 +126,6 @@
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CONFIG_SYS_CACHELINE_SIZE      16
 
 #define ICACHE_STATUS                  (CONFIG_SYS_INIT_RAM_ADDR + \
                                         CONFIG_SYS_INIT_RAM_SIZE - 8)