configs: Migrate CONFIG_SYS_MAX_FLASH_BANKS to Kconfig

[platform/kernel/u-boot.git] / include / configs / M5208EVBE.h

diff --git a/include/configs/M5208EVBE.h b/include/configs/M5208EVBE.h
index 867ae8b..e6f4255 100644 (file)
--- a/include/configs/M5208EVBE.h
+++ b/include/configs/M5208EVBE.h
@@ -13,23 +13,16 @@
  * High Level Configuration Options
  * (easy to change)
  */
-#define CONFIG_MCFUART
 #define CONFIG_SYS_UART_PORT           (0)
 
-#undef CONFIG_WATCHDOG
 #define CONFIG_WATCHDOG_TIMEOUT                5000
 
-#define CONFIG_MCFFEC
 #ifdef CONFIG_MCFFEC
 #      define CONFIG_MII_INIT          1
 #      define CONFIG_SYS_DISCOVER_PHY
 #      define CONFIG_SYS_RX_ETH_BUFFER 8
 #      define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
 #      define CONFIG_HAS_ETH1
-
-#      define CONFIG_SYS_FEC0_PINMUX   0
-#      define CONFIG_SYS_FEC0_MIIBASE  CONFIG_SYS_FEC0_IOBASE
-#      define MCFFEC_TOUT_LOOP         50000
 /* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */
 #      ifndef CONFIG_SYS_DISCOVER_PHY
 #              define FECDUPLEX        FULL
@@ -43,17 +36,8 @@
 
 /* Timer */
 #define CONFIG_MCFTMR
-#undef CONFIG_MCFPIT
 
 /* I2C */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_FSL
-#define CONFIG_SYS_FSL_I2C_SPEED       80000
-#define CONFIG_SYS_FSL_I2C_SLAVE       0x7F
-#define CONFIG_SYS_FSL_I2C_OFFSET      0x58000
-#define CONFIG_SYS_IMMR                        CONFIG_SYS_MBAR
-
-#define CONFIG_UDP_CHECKSUM
 
 #ifdef CONFIG_MCFFEC
 #      define CONFIG_IPADDR    192.162.1.2
@@ -77,8 +61,6 @@
 
 #define CONFIG_PRAM            512     /* 512 KB */
 
-#define CONFIG_SYS_LOAD_ADDR   0x40010000
-
 #define CONFIG_SYS_CLK         166666666       /* CPU Core Clock */
 #define CONFIG_SYS_PLL_ODR     0x36
 #define CONFIG_SYS_PLL_FDR     0x7D
@@ -110,14 +92,10 @@
 #define CONFIG_SYS_SDRAM_EMOD          0x80010000
 #define CONFIG_SYS_SDRAM_MODE          0x00CD0000
 
-#define CONFIG_SYS_MEMTEST_START       CONFIG_SYS_SDRAM_BASE + 0x400
-#define CONFIG_SYS_MEMTEST_END         ((CONFIG_SYS_SDRAM_SIZE - 3) << 20)
-
 #define CONFIG_SYS_MONITOR_BASE                (CONFIG_SYS_FLASH_BASE + 0x400)
 #define CONFIG_SYS_MONITOR_LEN         (256 << 10)     /* Reserve 256 kB for Monitor */
 
 #define CONFIG_SYS_BOOTPARAMS_LEN      64*1024
-#define CONFIG_SYS_MALLOC_LEN          (128 << 10)     /* Reserve 128 kB for malloc() */
 
 /*
  * For booting Linux, the board info and command line data
@@ -131,7 +109,6 @@
 #ifdef CONFIG_SYS_FLASH_CFI
 #      define CONFIG_SYS_FLASH_SIZE            0x800000        /* Max size that the board might have */
 #      define CONFIG_SYS_FLASH_CFI_WIDTH       FLASH_CFI_16BIT
-#      define CONFIG_SYS_MAX_FLASH_BANKS       1       /* max number of memory banks */
 #      define CONFIG_SYS_MAX_FLASH_SECT        254     /* max number of sectors on one chip */
 #endif
 
@@ -147,7 +124,6 @@
        env/embedded.o(.text*);
 
 /* Cache Configuration */
-#define CONFIG_SYS_CACHELINE_SIZE      16
 
 #define ICACHE_STATUS                  (CONFIG_SYS_INIT_RAM_ADDR + \
                                         CONFIG_SYS_INIT_RAM_SIZE - 8)