tizen 2.3.1 release

[platform/kernel/u-boot.git] / include / configs / KAREF.h

diff --git a/include/configs/KAREF.h b/include/configs/KAREF.h
index 546b725..fcf66b7 100644 (file)
--- a/include/configs/KAREF.h
+++ b/include/configs/KAREF.h
@@ -1,7 +1,23 @@
 /*
  * (C) Copyright 2004 Sandburst Corporation
  *
- * SPDX-License-Identifier:    GPL-2.0+
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.         See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
  */
 
 /************************************************************************
@@ -23,6 +39,7 @@
 #define CONFIG_KAREF        1          /* Board is Kamino Ref Variant */
 #define CONFIG_440GX             1          /* Specifc GX support      */
 #define CONFIG_440               1          /* ... PPC440 family       */
+#define CONFIG_4xx               1          /* ... PPC4xx family       */
 #define CONFIG_BOARD_EARLY_INIT_F 1         /* Call board_pre_init     */
 #define CONFIG_MISC_INIT_F       1          /* Call board misc_init_f  */
 #define CONFIG_MISC_INIT_R       1          /* Call board misc_init_r  */
@@ -79,6 +96,7 @@
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE    1
 #define CONFIG_SYS_NS16550_CLK         get_serial_clock()
+#define CONFIG_SERIAL_MULTI   1
 #define CONFIG_BAUDRATE              9600
 
 #define CONFIG_SYS_BAUDRATE_TABLE  \
@@ -116,15 +134,14 @@
 /*-----------------------------------------------------------------------
  * I2C
  *----------------------------------------------------------------------*/
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_PPC4XX
-#define CONFIG_SYS_I2C_PPC4XX_CH0
-#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 400000
-#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0 0x7F
-#define CONFIG_SYS_I2C_PPC4XX_CH1
-#define CONFIG_SYS_I2C_PPC4XX_SPEED_1 400000 /* I2C speed 400kHz */
-#define CONFIG_SYS_I2C_PPC4XX_SLAVE_1 0x7F
-#define CONFIG_SYS_I2C_NOPROBES { { 0, 0x69} } /* Don't probe these addrs */
+#define CONFIG_HARD_I2C              1              /* I2C hardware support    */
+#undef CONFIG_SOFT_I2C                      /* I2C !bit-banged         */
+#define CONFIG_PPC4XX_I2C              /* use PPC4xx driver            */
+#define CONFIG_SYS_I2C_SPEED         400000         /* I2C speed 400kHz        */
+#define CONFIG_SYS_I2C_SLAVE         0x7F           /* I2C slave address       */
+#define CONFIG_SYS_I2C_NOPROBES      {0x69}         /* Don't probe these addrs */
+#define CONFIG_I2C_BUS1              1              /* Include i2c bus 1 supp  */
+
 
 /*-----------------------------------------------------------------------
  * Environment
@@ -147,6 +164,7 @@
  *----------------------------------------------------------------------*/
 #define CONFIG_PPC4xx_EMAC
 #define CONFIG_MII           1              /* MII PHY management      */
+#define CONFIG_NET_MULTI      1
 #define CONFIG_PHY_ADDR              0xff           /* no phy on EMAC0         */
 #define CONFIG_PHY1_ADDR      0xff          /* no phy on EMAC1         */
 #define CONFIG_PHY2_ADDR      0x08          /* PHY addr, MGMT, EMAC2   */
@@ -206,6 +224,7 @@
 #define CONFIG_SYS_PROMPT            "KaRefDes=> "  /* Monitor Command Prompt  */
 
 #define CONFIG_SYS_HUSH_PARSER        1             /* HUSH for ext'd cli      */
+#define CONFIG_SYS_PROMPT_HUSH_PS2    "> "
 
 
 /*-----------------------------------------------------------------------
@@ -252,7 +271,6 @@
  *----------------------------------------------------------------------*/
 /* General PCI */
 #define CONFIG_PCI                          /* include pci support     */
-#define CONFIG_PCI_INDIRECT_BRIDGE     /* indirect PCI bridge support */
 #define CONFIG_PCI_PNP                      /* do pci plug-and-play    */
 #define CONFIG_PCI_SCAN_SHOW                /* show pci devices        */
 #define CONFIG_SYS_PCI_TARGBASE      (CONFIG_SYS_PCI_MEMBASE)
@@ -272,6 +290,7 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE  230400        /* kgdb serial port baud   */
+#define CONFIG_KGDB_SER_INDEX 2                     /* kgdb serial port        */
 #endif
 
 /*-----------------------------------------------------------------------
@@ -281,4 +300,7 @@
 #define CONFIG_SYS_LOAD_ADDR         0x8000000      /* default load address    */
 #define CONFIG_SYS_EXTBDINFO         1              /* use extended board_info */
 
+#define CONFIG_SYS_HZ                100            /* decr freq: 1 ms ticks   */
+
+
 #endif /* __CONFIG_H */