video: Moving mx3fb.c to CONFIG_VIDEO

[platform/kernel/u-boot.git] / include / configs / IDS8247.h

diff --git a/include/configs/IDS8247.h b/include/configs/IDS8247.h
index 4c4af05..8552250 100644 (file)
--- a/include/configs/IDS8247.h
+++ b/include/configs/IDS8247.h
@@ -39,6 +39,8 @@
 #define CPU_ID_STR             "MPC8247"
 #define CONFIG_CPM2            1       /* Has a CPM2 */
 
+#define        CONFIG_SYS_TEXT_BASE    0xfff00000
+
 #define CONFIG_BOOTDELAY       5       /* autoboot after 5 seconds     */
 
 #define        CONFIG_BOOTCOUNT_LIMIT
@@ -125,8 +127,6 @@
 #define CONFIG_OF_LIBFDT       1
 #define CONFIG_OF_BOARD_SETUP  1
 
-#define OF_CPU "PowerPC,8247@0"
-#define OF_SOC "soc@f0000000"
 #define OF_TBCLK       (bd->bi_busfreq / 4)
 #define OF_STDOUT_PATH "/soc@f0000000/serial8250@e0008000"
 
@@ -229,9 +229,9 @@
 #define CONFIG_SYS_FLASH_CFI                           /* The flash is CFI compatible  */
 #define CONFIG_FLASH_CFI_DRIVER                        /* Use common CFI driver        */
 #define CONFIG_SYS_FLASH_BANKS_LIST    { 0xFF800000 }
-#define CONFIG_SYS_MAX_FLASH_BANKS_DETECT      1
+#define CONFIG_SYS_MAX_FLASH_BANKS     1       /* max number of memory banks         */
 /* What should the base address of the main FLASH be and how big is
- * it (in MBytes)? This must contain TEXT_BASE from board/ids8247/config.mk
+ * it (in MBytes)? This must contain CONFIG_SYS_TEXT_BASE from board/ids8247/config.mk
  * The main FLASH is whichever is connected to *CS0.
  */
 #define CONFIG_SYS_FLASH0_BASE 0xFFF00000
@@ -244,7 +244,6 @@
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CONFIG_SYS_MAX_FLASH_BANKS     1       /* max num of memory banks      */
 #define CONFIG_SYS_MAX_FLASH_SECT      128     /* max num of sects on one chip */
 
 #define CONFIG_SYS_FLASH_ERASE_TOUT    240000  /* Flash Erase Timeout (in ms)  */
@@ -265,8 +264,6 @@
 #define CONFIG_SYS_NAND0_BASE 0xE1000000
 #define CONFIG_SYS_MAX_NAND_DEVICE     1       /* Max number of NAND devices           */
 
-#define CONFIG_SYS_64BIT_VSPRINTF              /* needed for nand_util.c */
-
 #endif /* CONFIG_CMD_NAND */
 
 /*-----------------------------------------------------------------------
@@ -296,9 +293,8 @@
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
 #define CONFIG_SYS_INIT_RAM_ADDR       CONFIG_SYS_IMMR
-#define CONFIG_SYS_INIT_RAM_END        0x2000  /* End of used area in DPRAM    */
-#define CONFIG_SYS_GBL_DATA_SIZE       128 /* size in bytes reserved for initial data*/
-#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_RAM_SIZE       0x2000  /* Size of used area in DPRAM    */
+#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET      CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
@@ -310,19 +306,10 @@
  */
 #define CONFIG_SYS_SDRAM_BASE          0x00000000
 #define CONFIG_SYS_FLASH_BASE          CONFIG_SYS_FLASH0_BASE
-#define CONFIG_SYS_MONITOR_BASE        TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE        CONFIG_SYS_TEXT_BASE
 #define CONFIG_SYS_MONITOR_LEN         (256 << 10)     /* Reserve 256 kB for Monitor */
 #define CONFIG_SYS_MALLOC_LEN          (128 << 10)     /* Reserve 128 kB for malloc()*/
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD          0x01    /* Normal Power-On: Boot from FLASH*/
-#define BOOTFLAG_WARM          0x02    /* Software reboot                 */
-
-
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */